Home Accents Holiday TY069-1713 User manual

SKU # 1001 788 252
OMS THD SKU # 1002 455 780
Model # TY069-1713
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 3ft 80 LED Lighted Wire Doe. We strive to
continually create quality products designed to enhance your home. Visit
us online to see our full line of products available for your home
improvement needs. Thank you for choosing HomeAccents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
3ft 80 LED Lighted Wire Doe
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many
parts are connected by the lighting string that runs throughout the item. Take special
care not to pull, cut or damage the lighting string. Read the entire manual prior to
assembly and identify all the parts included in the package against the parts list. It is
recommended to assemble parts of the product while laying flat on the ground
versus standing the item up to assemble the parts. If any parts are missing or
damaged do not attempt assembly but contact our customer service center.
*Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 4.8 Watts (0.04
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections, exposed copper wire or other obvious damage.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and flat.
b. Carefully disassemble the unit taking caution not to cut any electrical wires.
c. Wipe the unit with a damp cloth and allow the unit to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Trouble Shooting
a. Ensure that the floor or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse, in store display models or accidents. Questions, problems, missing parts?
Before returning to the store, call Home Accents Holiday Customer Service 8 a.m.-6
p.m., EST, Monday-Friday
Diagram of Parts
Parts List
Locater Name Qty.
A Ear 2
B Head & Neck 1
C Body 1
D Tail 1
E Front Leg 2
F Hind Leg 2
Hardware List
Locater Name Qty.
G Bolt & Wingnut 1
H Spare Bulb 2
I Spare Fuse 2
J Plastic Tie 10
K Ground Stake 4
H
J
I
K
A
B
CD
E
F
G

A
SSEMBLY
1 Securing the Hind Legs to Body
Unfold the Hind Legs (F) attached to the Body (C). Gently pull the Hind
Legs (F) down and away from the Body. Insert the "L" shaped hooks
inside the rear of the Body into the connecting holes at the inside edge
of Hind Legs.
2 Assembling the Front Legs to the Body
Align the Front Legs (E) with the bottom of the front of the Body (C) so
the connecting loops line up then fasten them together with the Bolt &
Wingnut (G).
3 Assembling the Tail to the Body
Insert the connecting rod on the Tail (D) into the rear of the Body (C).
4 Assembling the Head & Neck to the Body
There are 2 hooks on the back edge of the Head & Neck (B). Hang the
hooks onto the front edge of the Body (C) then fasten together over the
metal frames with Plastic Ties (J).
5 Assembling the Ears to the Head & Neck
Insert the two metal rods at the bottom of the Ears (A) into the
connecting holes on top of the Head & Neck (B) .
6 Assembling the Ground Stakes
Insert Ground Stakes (K) over the metal frame at each hoof then into the
ground firmly.
C
F
G
E
C
C D
B
C
J
B
A
K