home in piranha PEACOCK User manual

A03 200515(English) PC46 (PEACOCK)General Care:Keep furniture out of direct sunlight. Use mats and coasters to protect surfaces. Do not place hot or wet items directly onto unprotected surfaces. Cleaning:Wipe surfaces with a clean damp (not wet) cloth then dry with a clean lint free cotton cloth.Glass surfaces may be polished with window or other glass cleaning liquids.
TWO PEOPLE RECOMMENDED
PEACOCKPlease retain cartons until assembled as goods MUST be returned in original packaging.*single use and limited to 1 of each item of matching furniturePlease read this guide carefully and check that you have all parts before you begin assembly.As a thank you for your purchase, we would like to offer you a 10% discount* off our range of matching furniture on www.homeinonline.com with voucher code 10%MATCH. Need help with your item or unhappy?If you have ANY questions, please do not hesitate to email us on [email protected]and we will do our very best to help. You can also contact us via our websitewww.homeinonline.com

PC46P.2
PARTS LIST1234567891011X2X2X2X2X6X2X4X2X1X1X11166141433422101198

ACBPARTPARTQTY.QTY.ITEMITEM41EF20845X45 MMΦ15 MM6X40 MMD124X16 MMHG4X16 MM24IΦ6 MM826X12 MM
PC46P.3
5X40 MM412131415X4X2X2X46X45 MMΦ12 MM86X25 MM8JK

PC46P.4
ASSEMBLY STEPS:12
Connecting pieceBolt
6X40MM 6X45MM 6X25MM BOLT INSTALLATION AS BELOW:
A1. A2. A3.A4.
SCREWS
4PCSB5X45 MMRotate connecting piece if foundin position illustrated aboveCorrect orientation to receive bolts13314PCSΦ15 MMJ
SCREWS
4PCS6X40 MMD1331

PC46P.5
345115X2115X2
SCREWS
G8PCS4X16 MM99424211
SCREWS
4PCS5X40 MMA
SCREWS
4PCS6X25 MMI4PCSΦ12 MMK

PC46P.6
67112114421091110118
SCREWS
4PCS5X40 MMA8PCSΦ15 MMJ
SCREWS
4PCS6X40 MMD4PCS6X45 MMFDDFF
SCREWS
4PCS6X25 MMI4PCSΦ12 MMK

PC46P.7
915X4108148X2911
SCREWS
CH10PCS2PCS4X16 MM814E
SCREWS
4PCS6X12 MM
SCREWS
C10PCS4X16 MM91414HΦ6 MM

PC46P.8
6612126611X412
SCREWS
G8PCS4X16 MM1313131412
SCREWS
G8PCS4X16 MM5577

PC46P.9
OPENCLOSE11223344To convert your cabinet into a workstation, raise the side panel as shown below into a horizontal position and then slide out the support leg into the locking position. Please ensure you insert the catch pin into the hole provided. Repeat for the other side panel and reverse this procedure to close taking care not to catch your fingers. For safety, please ensure the floor is level and that the table is in a safe position avoiding possible knocks from anyone passing by.CAUTION