HOMEDEPOT EVERBILT CX1000AMEVB User manual

THANK YOU
We appreciate the trust and condence you have placed in Everbilt through the purchase of this Power Vent. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your
home improvement needs. Thank you for choosing Everbilt!
USE AND CARE GUIDE
ROOF MOUNTED POWER VENTS
Questions, problems, missing parts? Before returning to the store,
call Everbilt Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-877-527-0313
HOMEDEPOT.COM
Item #1005 622 499
#1005 443 146
#1005 443 205
Model #CX1000AMEVB
#CX2001AMWGEVB
#CX4000AMWGEVB

2
Table of Contents
Safety Information ..................................2
Intended Installation ...............................3
Tools Required ....................................3
Warranty ..........................................3
Pre-Installation.....................................3
Package Contents .................................4
Installation ........................................4
Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Maintenance .......................................7
Care and Cleaning ..................................7
Troubleshooting ....................................8
Safety Information
PLEASE READ AND UNDERSTAND THIS ENTIRE MANUAL BEFORE
ATTEMPTING TO ASSEMBLE, OPERATE, OR INSTALL THE PRODUCT.
WARNING: Failure to follow these instructions could result in
serious injury or death.
WARNING: Turn off the electrical current to the unit before
attempting any service work. If you are unfamiliar with methods
of installing electrical wiring, secure the services of a qualied
electrician.
WARNING: All electrical connections must be in accordance
with local codes, ordinances, or national electrical codes.
WARNING: Before servicing or cleaning this unit, switch
power off at the service panel and lock out to prevent
power from being switched on accidentally. When service
disconnecting means cannot be locked, securely fasten a
prominent Warning tag to the service panel.
WARNING: Installation work and electrical wiring must
be performed by a qualied person in accordance with
the applicable codes and standards, including re-related
construction.
WARNING: When cutting or drilling into a wall or ceiling, do
not damage electrical wiring and other hidden utilities.
WARNING: The combustion airow needed for safe operation
of fuel-burning equipment may be affected by this unit’s
operation. Follow the heating equipment manufacturer’s
guideline and safety standards such as those published by the
National Fire and Protection Association (NFPA), the American
Society for Heating, Refrigeration and Air-conditioning Engineers
(ASHRAE), and the local code authorities.
WARNING: Do not attempt to use this fan with any solid-state
speed control device.
WARNING: Use this unit only in the manner intended by the
manufacturer.
CAUTION: This unit has an unguarded propeller. Do not use in
locations readily accessible to people or animals.
CAUTION: Mount with the lowest moving parts at least 8 ft.
above oor level.
CAUTION: For general ventilating use only. Do not use to
exhaust hazardous or explosive materials and vapors.
CAUTION: Carbon monoxide is an odorless, colorless gas that
can kill. It may be drawn into the house by operating this fan
if your fuel-burning equipment is not properly maintained, or if
you lack adequate attic intake vents.

3 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Warranty
The manufacturer extends this warranty to the original retail purchaser of its model or, if this unit is purchased and installed by a new home
builder, then to the original owner of the home. No subsequent purchaser of the unit or of a home in which it is installed is entitled to any of
the benets of this warranty.
This product is warranted against defects in materials and workmanship for a period of two (2) or ve (5) years from the date of original
retail purchase depending upon your model as listed below:
□CX1000AMEVB and CX2001AMWGEVB – 2 years
□CX4000AMWGEVB – 5 years
No other components or parts are warranted. There is no warranty for defects caused by abuse, faulty installation, or the like. Repairs or
replacement parts supplied under this warranty are warranted only for the period of this warranty; that is, two (2) or ve (5) years from the
date of the original retail purchase of the unit.
In the event of a defect or malfunction, we will replace or repair the defective part or component only and return the new or repaired part to
your freight prepaid. You must bear all other expenses incurred in obtaining repairs, including labor required for eld repair or replacement
and the cost of shipping the defective part of component to use. You must also bear the cost of repair to or replacement of any part of
component and the shipping charges incurred for the repair or replacement and return to you any part of component not covered by this
warranty, including parts of components damaged by you.
The company reserves the right to demand and receive written evidence of the date of purchase before undertaking to perform its
obligations under this warranty. You should, therefore, retain your sales slip and attach a copy of it to the warranty claim. There is no
informal dispute setting mechanism available in the event of a controversy involving this warranty. Any and all implied warranties which
may exist terminate upon the expiration of this written warranty, two (2) or ve (5) years from the date of the original retail purchase. Some
states do not allow limitations on how long an implied warranty lasts, so this limitation may not apply to you.
The manufacturer is not liable to you for incidental or consequential damages arising out of a defect or malfunction of a unit of its
installation or out of any alleged breach of this warranty. Some states do not allow the exclusion or limitation of incidental or consequential
damages, so this limitation may not apply to you.
This warranty gives you specic legal rights and you may also have other rights which may vary from state to state. Contact the Customer
Service Team at 1-877-527-0313 or visit www.HomeDepot.com.
Pre-Installation
INTENDED INSTALLATION
This roof-mounted unit is designed for attics of average size and operates most efciently when air intakes are located around the eaves.
For larger attics, use two or more units. At least 600 sq. in. of net free air intake is required per unit. The motor operates on 115-VAC 60Hz
current. See the motor label for amperage.
TOOLS REQUIRED
Phillips
screwdriver
Flathead
screwdriver
Wood
screws
Speed
square
Roong
nails Saw
Pencil Straight
edge
Measuring
tape
Portable
electric
drill
Personal
protective
equipment
Roof
sealing
compound

4
Pre-Installation (continued)
PACKAGE CONTENTS
A
B
Part Description
A Roof-mount fan with mounting ange
B Thermostat
Installation
1 Positioning the fan
□Place the fan (A) on top of the shingles, approximately
in the center of the roof and close to the ridgeline, but
positioned so the unit is only visible on one side of the
house.
A
2 Drilling your reference point
□With the fan in position, locate a centerline directly
between two rafters.
□From inside the roof, drill a hole through the roof. This hole
will be used as a reference point for the next step.
X
X

5 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Installation (continued)
3 Drawing a reference square
□Draw a reference square 25-3/8 in. x 25-3/8 in. on the roof
using the hole drilled in step 2 as the center.
25-3/8 in.
25-3/8 in.
4 Drawing a circle
□Within the square, draw a 17 in. diameter circle (1) and
remove shingles, nails, and felt from the circle.
1
5 Cutting the roof
□Draw a 14-1/2 in. diameter circle (2) inside the 17 in.
circle(1). Ensure that the hole drilled in step 2 is at the
center of this circle.
□Cut through the decking using the 14-1/2 in. circle as the
cut line.
1
2
6 Positioning the ange
□Slide the fan’s ange up under the shingles. You may need
to remove some roong nails.
□Position the fan on the reference square drawing in step 3
to align the exhaust opening.

6
Installation (continued)
7 Securing the fan in place
□When the fan is in place, apply a generous amount of
roong compound between the ange and the shingles
approximately 1 in. inside the perimeter of the ange and
begin to secure with nails (not included).
□When nished, check the installation for leakage with
water from a garden hose. Do not spray water directly into
the vent opening.
Suggested Nailing Pattern
8 Installing the thermostat
WARNING: When cutting or drilling into a wall or ceiling, do
not damage electrical wiring and other hidden utilities.
□Remove the cover from the thermostat box and, using
screws (not included) to prevent damage to the control,
attach the mounting plate to a stud.
□Leave the back side of the control unobstructed to allow
free air circulation behind the box.
□Wire the unit to the incoming power supply as follows:
□Connect one black wire from the thermostat (B) to the
black wire of the incoming power supply.
□Connect the other black wire from the thermostat (B) to
the black motor wire.
□Connect the white wire from the power supply to the
white motor wire.
□Attach the ground wire from the incoming power supply
to the ground screw (1) on the thermostat (B).
1
B
Power
Supply
To
Motor

7 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Operation
Please ensure adequate air intake (4.2 – 5.3 sq ft) is available prior
to operation. Set the thermostat to the desired attic temperature.
The recommended setting is 90˚ - 110˚F. Ensure sufcient
power is supplied to the fan. The fan will run as long as the attic
temperature remains above the set temperature.
Maintenance
WARNING: Disconnect the power before you perform
any maintenance.
□Check the electrical connections annually.
□Ensure that the housing is unobstructed and free of debris to allow proper air ow.
Care and Cleaning
WARNING: Disconnect the power before you perform
any cleaning.
□Wipe the unit down with a damp cloth or rag.
□Do not use corrosive or harsh chemicals to clean.

8
Troubleshooting
Problem Solution
The fan will not turn on. □Ensure that there is a proper electrical connection.
□Check the breaker in the main fuse panel.
□Adjust the temperature setting on the thermostat.
The fan will not turn off. □Ensure that there is a proper electrical connection.
□Raise the temperature setting on the thermostat.
There is a loud noise coming from
the unit.
□Ensure that there are no obstructions or debris caught in the housing.
□Ensure that the unit is securely fastened to its mounting surface.
□If possible, identify whether the noise is coming from a motor. If so, the problem is probably a
bearing issue.
□Check for any loose screws or hardware.
The attic is still hot. □Ensure the unit your purchased is rated for the size of your home.
□Ensure adequate air ow through the ridge vent and/or roof vent(s).

Questions, problems, missing parts? Before returning to the store,
call Everbilt Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday
1-877-527-0313
HOMEDEPOT.COM
Retain this manual for future use.