Homegear JTHG-300CD User manual

Mirrored Jewellery Cabinet

Part List
Part
Description
Quantity
A
Cabinet
1
B
Door Knob & Screw
1
C
Door Hanging Hooks
2
D
Door Hanging Screw
4
E
Wall Anchor
2
F
Wall Hanging Screw
2
G
elcro Strip
1
H
E A Dots
4

Assembly Instructions
Step 1
1. Remove the screw from the door knob.
2. Place the screw through the screw hole on the inside of the door.
. Screw the door knob into place.
Step 2 - Door Hanging
1. Determine the height at which you wish to hang the Homegear Jewellery Cabinet.
2. Align the Door Hanging Hooks with the corresponding holes on the back of the Homegear
Jewellery Cabinet. Ensure both Door Hanging Hooks are facing towards the door.
. Using 4 Door Hanging Screws (2 per hook) firmly secure the Door Hanging Hooks to the back of
the Homegear Jewellery Cabinet.
4. Once you have chosen the desired location, attach one strip of the elcro Strap to the back of
the cabinet and the other strip of elcro Strap to the door, this will minimize the movement of
the Homegear Jewellery Cabinet.

Step - Wall Hanging
1. Place 1 E A dot on each corner of the Homegear Jewellery Cabinet.
2. Determine the desired location to hang the Homegear Jewellery Cabinet and mark the entry
point for the 2 Wall Anchors.
. Place the Wall Anchors into the wall at the marked spots making sure the anchors are level.
To install the anchors use a Phillips Head Screwdriver and screw both Wall Anchors into the
wall.
4. Open the front of the Homegear Jewellery Cabinet and locate the 2 red arrows inside. These
are the entry points for the 2 Wall Screws. Push both Wall Screws through the black foam
from inside the Homegear Jewellery Cabinet and into the Wall Anchors.

UK & Europe
www.shop247.co.uk
Units 3 & 4 Lower Park Farm
Storrage Lane
Alvechurch, Worcestershire B48 ER
United Kingdom
Telephone: [phone]