1.3.2: From the camera
The camera has two operating modes (photo or video), to go from one mode to
the other, you just need to press the power on button.
Video mode:
Video mode is represented by this icon:
To start a recording, press the capture button, the timer will start and the
recording indicator will flash.
To stop the recording, press the capture button again, the timer will display the
remaining recording time available on the memory card.
This operation can be done using a remote smartphone (see below).
Photo mode:
Photo mode is represented by this icon:
To take a photo, just press the capture button to take a picture. The numbers of
photos remaining in relation to the space left on the memory card is displayed on
the control screen.
This operation can be done using a remote smartphone (see below).
Settings menu:
To access the camera settings, press the Wi-Fi button for 2 seconds, and a beep
will sound.
To change between configurations, briefly press the Wi-Fi button to return to the
previous menu.
To leave the menu, press the Wi-Fi button for 2 seconds.
To confirm a selection, briefly press the capture button.
Menu detail:
- Eco energy: allows the time at which the camera changes into energy-saving
mode to be set (1 min, 3 min, 5 min, off).
- Date/time: allows the date and time of the camera to be set.
- Language: allows the language to be defined, English is chosen by default.
- Reinitialise. All: allows all the camera settings to be reinitialised.
- System: displays information on the firmware of the camera and the memory
card capacity.
- Format...: deletes the memory card in full (attention, all data contained in the
memory card will be deleted).
P
8
