honor Router 3 User manual

Quick Start Guide
Guide de démarrage rapide
Schnellstartanleitung
Guida rapida
Guía de inicio rápido
Pika-aloitusopas
Stručná úvodní příručka
Snabbstartsguide
Короткий посібник користувача
Краткое руководство пользователя
WiFi Yönlendirici Hızlı Kullanım Kılavuzu
Stručná úvodná príručka
Οδηγός γρήγορης έναρξης
Gyors útmutató
Kratko uputstvo
XD20

Contents
Quick Start Guide .......................................................... 1
Guide de démarrage rapide ................................... 14
Schnellstartanleitung ............................................ 27
Guida rapida ....................................................... 41
Guía de inicio rápido .......................................... 54
Pika-aloitusopas .......................................................... 67
Stručná úvodní příručka ............................................ 80
Snabbstartsguide ................................................. 93
Короткий посібник користувача ................................ 106
Краткое руководство пользователя ........................ 120
WiFi Yönlendirici Hızlı Kullanım Kılavuzu ................... 142
Stručná úvodná príručka ................................................... 165
Οδηγός γρήγορης έναρξης ............................................. 178
Gyors útmutató ..................................................................... 192
Kratko uputstvo .................................................................... 206

1
Getting Started
12 3 5 6
POWER RESET
4
3
2
1
WAN LAN LAN LAN
4
Power portH button Indicator
23
1
Quick Start Guide
RESET button
WAN port: Connect to optical modems, broadband modems, etc.
LAN port: Connect to a wired Internet device, such as a computer.
4
5
6

2 3
Step 1: Connecting the cables
POWER RESET
4
3
2
1
WAN LAN LAN LAN
POWER
LAN
PON
RESET
Internet
Optical/Broadband/cable modem
(from your broadband provider)
• Erect the all antennas upright to ensure optimized Wi-Fi® signal.
•If the indicator stays red, this indicates that the router is not connected to the Internet. Please
refer to "Step 2: Conguring the network settings".
HONOR Router 3
WAN
LAN

3
1Connect your mobile phone or computer
to the router’s Wi-Fi network (no
password required).
Check for the Wi-Fi name on the bottom of
the new router.
XXXXXX
Wi-Fi Name: XXXXXX
Connected
2Open the browser, you will be
automatically redirected.
( If the page is not displayed
automatically, enter 192.168.3.1) .
Let's get started
Step 2: Conguring the network settings
Wi-Fi
Wi-Fi

4 5
3Enter your broadband account and password.
If your Internet connection does not require an account and password, please skip to the
next step.
Internet access wizard
Broadband account
Broadband password
VLAN
Next
•If you have forgotten your broadband account
and password, contact your broadband carrier
to obtain a broadband account and password.
•If you need to congure VLAN on your network,
contact your broadband carrier to conrm the
VLAN parameters, and enable the VLAN switch
on the screen.

5
4Set a new Wi-Fi name, Wi-Fi password, and admin password for the new router.
Internet access wizard
Dual band
optimization
Wi-Fi network name
Wi-Fi network password
Admin password
Next
Internet access wizard
Conguration complete.
Enable Dual band optimization: Priority usage of 5 GHz Wi-Fi band over 2.4 GHz band
when signal strength is equal to increase connection speeds.

6 7
Indicator
Steady green
Steady red
Flashing
Connected to the network
Not connected to the network
•Loose cable or connect error. Check the cable.
•Broadband network error. Contact your broadband carrier.
The router has detected a pairable device.
When other HUAWEI/HONOR routers (with H or Hi button) are detected,
the indicator on the HONOR Router 3 will flash. When this happens,
press the HONOR Router 3's H button. The indicator should ash quickly,
indicating that the pairable device is connecting to the HONOR Router 3.
The connection process is complete when the indicator stops ashing.
•If you touched the Hbutton by accident, wait for 2 minutes till the indicator
returns to normal.
•The Hbutton also features WPS functionality.
Manage the router with our mobile app
Scan the QR code to download and install the HUAWEI smart
device management app on your mobile phone or tablet. You can
use the app to manage your router.

7
Frequently Asked Questions (FAQ)
1: What can I do if I encounter any of the following issues when conguring the router?
• If your device did not detect the router's Wi-Fi: Ensure that the router is powered on. Wait for a
moment (till the router is started) and try to search again on your device.
•If you cannot visit the router's conguration page on your device: Ensure that your device is
connected to the router's Wi-Fi network, and then enter 192.168.3.1 in the browser to visit this
page on your device.
•If the page displays "Cable disconnected": Ensure that the router's WAN port is connected to
the modem's LAN port, and the modem has Internet access. Check that all joints are securely
connected and in good contact, and the network cables are in good condition.
If the issue persists, restore the router to the factory settings, and follow the guide to reconnect the
cables and congure the router.
2: How do I restore the router to its factory settings?
Connect the router to the power supply and wait until the router completes the startup process.
Use a needle or pin to press the RESET button on the router for more than two seconds until the
indicator light goes out. Wait for the router to complete the restart process. When the indicator
turns red, this indicates that the router has been restored to its factory settings.
If the router has been restored to factory settings, you need to congure it again.

89
5: What should I do if I forget my login password for the app or the router's web-based
management page?
Try using the router's Wi-Fi password to login. If the issue persists, restore the router to the factory
settings.
3: How do I connect an add-on HUAWEI/HONOR router (with H/Hi button) to my
HONOR Router 3's network?
You can connect the router in either of the following ways:
•Wired connection. Connect the WAN port of the add-on router (new or restored to factory
settings) to the LAN port of the congured HONOR Router 3 using an Ethernet cable.
•Wireless connection (using the H button). Step 1: Place the add-on router (new or restored to
factory settings) within one meter of the congured HONOR Router 3 and connect it to the
power supply. Step 2: When the indicator on the HONOR Router 3 starts to ash, press the H
button on it. Wait until the indicator on the add-on router shows it is connected to the network.
The following HUAWEI/HONOR device models are supported: XD20, WS5800, WS7100 and WS7200.
For details about more device models, see the device manual.
4: How do I connect a Wi-Fi device to my router using WPS?
When your router is powered on, press its Hbutton, and then press the WPS button on the Wi-Fi
device (such as a phone) within two minutes, to initiate standard WPS negotiation and connect the
Wi-Fi device to the router's Wi-Fi network.

9
6: What should I do if some of my devices cannot nd or connect to the Wi-Fi?
This router supports Wi-Fi 6, which is the new generation Wi-Fi technology that can improve
network speeds for Wi-Fi 6 devices. However, some earlier devices, such as laptops using Intel
network adapters, may not be able to nd or connect to the Wi-Fi due to compatibility issues. In
this case, try to update the software version of the devices by referring to the device instruction
manual, or perform the following operations:
Update the router and the HUAWEI smart device management app to the latest version. Then
open the app, touch the router icon, touch Show more, search for and enable Backup Wi-Fi 5, and
connect your device to the Wi-Fi 5 network.
7: How do I connect my router to the HUAWEI CPE to expand the Wi-Fi network?
You can connect your router in either of the following ways:
• Wired connection
Place your router in a room with weak or no signal strength, then connect the WAN port of your
router to the LAN port of the HUAWEI CPE using an Ethernet cable.
• Wireless connection (using the H button)
Step 1: Place the router within one meter of the HUAWEI CPE and connect the power supply.
within one meter

10 11
• The gure is for reference only.
• Ensure that the HUAWEI CPE is connected to the Internet, and the router is new or restored to factory
settings.
• Ensure that the HUAWEI CPE supports the HUAWEI HiLink function and CoAP protocol. Please consult
the distributor for details.
• Ensure that the distance between your router and the HUAWEI CPE is less than 10 meters and there
are no more than two walls in between.
Step 2: When the indicator on the HUAWEI CPE starts to ash, press the Hbutton on it. Wait
until the indicator on the router shows that the router is connected to the network.
Step 3: Place the router in a room with weak signal strength and connect the power supply.

11
Safety information
Operation and safety
• Do not use your device if using the device is prohibited. Do not use the device if doing so causes
danger or interference with other electronic devices.
• Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a
device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker,
hold the device on the side opposite the pacemaker and do not carry the device in your front pocket.
• Avoid dusty, damp, or dirty environments. Avoid magnetic fields. Using the device in these
environments may result in circuit malfunctions.
• Ideal operating temperatures are 0 °C to 40 °C. Ideal storage temperatures are -40 °C to +70 °C.
Extreme heat or cold may damage your device or accessories.
• Keep the device and accessories in a well-ventilated and cool area away from direct sunlight. Do
not enclose or cover your device with towels or other objects. Do not place the device in a container
with poor heat dissipation, such as a box or bag.
• The device should be installed and operated with a minimum distance of 20 cm between the
radiator and your body.
• Using an unapproved or incompatible power adapter, charger, or battery may damage your device,
shorten its lifespan, or cause a re, explosion, or other hazards.
• For pluggable devices, the socket-outlet shall be installed near the devices and shall be easily
accessible.
• Unplug the power adapter from electrical outlets and the device when not in use.
• Do not touch the device or the charger with wet hands. Doing so may lead to short circuits,
malfunctions, or electric shocks.
Disposal and recycling information

12 13
The symbol on the product, battery, literature, or packaging means that the products and
batteries should be taken to separate waste collection points designated by local authorities at
the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner that
conserves valuable materials and protects human health and the environment.
For more information, please contact your local authorities, retailer, or household waste
disposal service or visit the website https://consumer.huawei.com/en/.
Reduction of hazardous substances
This device and its electrical accessories comply with local applicable rules on the restriction of the use
of certain hazardous substances in electrical and electronic equipment, such as EU REACH regulation,
RoHS and Batteries (where included) directive. For declarations of conformity about REACH and RoHS,
please visit the website https://consumer.huawei.com/certication.
EU regulatory conformance
Statement
Hereby, Huawei Device Co., Ltd. declares that this device XD20 is in compliance with the following
Directive: RED 2014/53/EU, RoHS 2011/65/EU, ErP 2009/125/EC.
The full text of the EU declaration of conformity, the detailed ErP information and most recent
information about accessories & software are available at the following internet address:
https://consumer.huawei.com/certication.
Restrictions in the 5 GHz band:
The 5150 to 5350 MHz frequency range is restricted to indoor use in: AT, BE, BG, CH, CY, CZ, DE, DK,
EE, EL, ES, FI, FR, HR, HU, IE, IS, IT, LI, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK, TR, UK(NI).
In accordance with the relevant statutory requirements in the UK, the 5150 to 5350 MHz frequency
range is restricted to indoor use in the United Kingdom.
Frequency Bands and Power
The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable

13
to this radio equipment are as follows: Wi-Fi 2.4G: 20 dBm, Wi-Fi 5G: 5150-5350 MHz: 23 dBm, 5470-
5725 MHz: 30dBm.
Legal Notice
Copyright © Huawei 2021. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE ANY KIND OF
WARRANTIES.
Trademarks and Permissions
Wi-Fi
®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi Alliance.
Other trademarks, product, service and company names mentioned may be the property of their
respective owners.
Version Update
In order to improve the security of the product and provide you with a better user experience, we will
push version update information to you on a regular basis when an important update is released.
Privacy Policy
To better understand how we use and protect your personal information, please see the privacy policy
at http://consumer.huawei.com/privacy-policy.
End User License Agreement
Please read and agree to the End User License Agreement (HUAWEI EULA) on the product’s
management page before using the product.
For More Help
Please visit https://consumer.huawei.com/en/support/hotline for recently updated hotline and email
address in your country or region.

14 15
Guide de démarrage rapide
12 3 5 6
POWER RESET
4
3
2
1
WAN LAN LAN LAN
4
Bouton de réinitialisation
Port WAN : pour la connexion de modems optiques, modems haut débit, etc.
Port LAN: pour la connexion d'appareils Internet laires, tels qu'un ordinateur.
Port d'alimentationBouton H Voyant
23
4
5
6
1
Mise en route

15
Étape 1: brancher les câbles
POWER RESET
4
3
2
1
WAN LAN LAN LAN
POWER
LAN
PON
RESET
HONOR Router3
WAN
LAN
Internet
Modem optique/haut débit/câble
(de votre fournisseur d'accès haut débit)
• Placez toutes les antennes en position verticale pour garantir un signal Wi-Fi® optimal.
•Si le voyant reste rouge, cela signie que le routeur n'est pas connecté à Internet. Veuillez
vous référer à "Étape 2 : congurer les paramètres réseau".

16 17
1Connectez votre téléphone portable ou
votre ordinateur au réseau Wi-Fi du routeur
(pas de mot de passe requis).
Vériez le nom du Wi-Fi (Wi-Fi name) indiqué
sur la partie inférieure du nouveau routeur.
XXXXXX
Wi-Fi Name: XXXXXX
Wi-Fi
Wi-Fi
Connecté
2Ouvrez le navigateur, vous serez
automatiquement redirigé.
(Si la page ne s'ache pas
automatiquement, saisir
192.168.3.1).
Commençons
Étape 2: congurer les paramètres réseau

17
3Saisissez le compte et le mot de passe du haut débit.
Si votre connexion Internet n'exige aucun compte ni mot de passe, veuillez passer à
l'étape suivante.
Assistant d'accès à
Internet
Compte haut débit
Mot de passe du haut
débit
VLAN
Suivant
•Si vous avez oublié le compte et le mot
de passe du haut débit, contactez votre
fournisseur d'accès haut débit pour les
obtenir.
•Si vous devez congurer le réseau local virtuel
(VLAN) sur votre réseau, contactez votre
fournisseur d'accès haut débit pour conrmer
les paramètres du réseau local virtuel, puis
activez le bouton VLAN à l'écran.

18 19
4Dénissez un nouveau nom et mot de passe pour le réseau Wi-Fi, ainsi qu'un mot
de passe d'administrateur pour le nouveau routeur.
Optimisation double
bandes
Nom du réseau Wi-Fi
MDP réseau Wi-Fi
Suivant
Conguration terminée.
Activez Optimisation double bandes : le réseau Wi-Fi 5 GHz sera utilisé en priorité par rapport
au réseau Wi-Fi 2.4 GHz quand la force du signal est équivalente, permettant des vitesses de
connexion accrues.
Mot de passe
administrateur
Assistant d'accès à
Internet Assistant d'accès à Internet