Hooker Furniture 5107-80113 User manual

ASSEMBLY INSTRUCTION
Item#: 5107-80113 End Table
** Please make sure you have all parts indicated below prior to assembly.
Assembly Steps:
1. Place table top upside down on a soft surface to prevent from scratching.
2. There are 8 pcs of posts (H) with same specification and profile. Please screw bolts (A) into
the thinner end of 4 upper posts, then screw bolts (B) into the thinner end of 4 remaining
bottom posts. (See diagram 1).
3. Then tighten up 4 upper posts (H) into table top (J) in clockwise direction tightly. (See diagram
2).
1/2
Diagram 2
Diagram 3
Diagram 1
Diagram 4

4. Place shelf (I, 3/4”T) on upper posts (H), then tighten up remaining 4 bottom posts (H)
through the shelf (I) into upper post (H) in clockwise direction.( See diagram 3)
5. Assemble bottom panel(G, 1 1/4”T) and bun feet (F) to upper posts(H) by using bolts (E) and
allen wrench (D) turning in clockwise direction tightly. ( See diagram 3)
6. Turn the end table upright.
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.
2/2