Hoover HV-LFL10 User manual

Before each wash
• Before washing a load, plug in the machine (Fig. 1a) and
open your water tap (Fig. 1b).
• Load your washing into the machine—page 22 in the
instruction manual has useful hints to help you with this
(Fig. 1c).
• Close the door and add detergent to the drawer—find all
the details on page 21 in the instruction manual (Fig. 1d).
Welcome to your new Hoover washing machine! We hope that this product brings you many years of
enjoyment.
Before installing the washing machine, you must remove the transport bolts from the back of the housing
and cover the holes with the transport hole caps provided.
This washing machine must be installed by a competent person. Installation involves removing the transport
bolts, leveling the machine, connecting it to your cold water supply and installing the drain hose.
NOTE: Make sure the washing machine is properly and securely installed. Before using the washing machine
for washing clothes, run a complete washing cycle without clothes using the drum clean program.
For detailed installation instructions, please consult the supplied instruction manual, which also has
comprehensive usage instructions and important safety advice.
Let’s get your washing
machine up and running!
Instructions
• Rotate the program dial to switch on the machine,
select a program and switch the machine off at the
end.
• The display screen (Fig. 2) shows the settings, time
remaining, options, codes, etc.
• Use the buttons to set a delay start time or an
extra rinse, or adjust the spin speed and water
temperature.
• Press the Start/Pause button to start a wash
program or to pause it.
• Press and hold a button, as instructed on the panel,
to activate the child lock, or to mute the alert sound.
Version #:
After Sales Support
Model #:
V1.0
1300 886 649
HV-LFL10
10 kg Front load
Washing machine
Hoover’s quick
& snappy start
up guide.
1A 1B
1D1C
2

Wash programs
Category Program
Time
(hr:min)
(A)
Default
Temperature
(°C) (B)
Default
Number of
Rinses
Default
Spin Speed
(rpm)
Light
Quick 0:18 —* 2 800
Silk 0:48 20 2600
Wool 0:50 20 2600
Medium
Cold 0:49 20* 2800
Warm 0:51 40 2 800
Long cold 1:40 20 4800
Steam 1:55 95* 2800
Anti-Allergy 2:11 90* 2 800
Heavy
Warm 1:16 40 2 800
Long warm 1:39 40 3 800
Extra Dirty 3:17 40 3 1400
Drum Clean 1:14 60 2* 800*
Special
Spin 0:11 —* —* 1000
Rinse+Spin 0:16 —* 1 1000
Night Wash 1:21 40 5* 800
(A) Default times for reference purposes only. (B) Default temperatures may differ slightly (+/-10°C).
* Settings marked with an asterisk cannot be adjusted from their listed value. All other settings (aside
from time) can be adjusted to other, pre-specified values. Please see page 18 of the instruction manual
for more information.
Afterwards
• When the buzzer sounds you can open the door and
take your washing out of the machine (Fig. 3a). The
machine will automatically change into stand-by mode
after 10 minutes of inactivity. Turn the dial back to the
Off position.
• Unplug the power plug (Fig. 3b).
• Close the water tap (Fig. 3c).
• We recommend you leave the door slightly ajar so the
drum can dry properly and to prevent mould and odour
development (Fig. 3d).
3A 3B
3D3C
Hope you enjoy your new Hoover
washing machine.