Hope Education 147046 User manual

Findel Education Ltd, 2 Gregory Street, Hyde, Cheshire SK14 4TH | Tel: [phone]
Batch 220542
Please keep these instructions for future reference
Adult Supervision Required
This product is designed for young children and therefore supervision is required at all
times.
Must be assembled by adults
Assembly by 2 adults is recommended
Protect the finish when assembling
We recommend assembling the product on a carpeted or equivalent surface to protect the
finish.
Indoor use on a level surface
This product is designed for indoor use only and must be used on a level surface.
General Cleaning
Clean the surface using a slightly damp cloth and if necessary a mild dish
washing liquid. Too much water may harm the finish of the wooden parts. Do not use any
cleaning product containing alcohol, bleach, ammonia or abrasives. These will dull any
shiny surfaces on the product. We recommend that you test all cleaning materials on the
underside of any surface that would not be seen during normal use of the product.
Blackboard
The blackboard board can be cleaned using a soft dry cloth or a slightly damp cloth.
Whiteboard Cleaning
Use a soft dry or damp cloth. If the ink has been left on for a long time, rub clean with a
damp cloth and then use a cleaner recommended by the supplier of your whiteboard
markers. Abrasive cleaning agents will damage the whiteboard surface.
Maintenance
Please check the product at regular intervals, and frequently tighten fixings if
necessary. If maintenance is not carried out, the product could cease to function properly.
Periodically inspect for cracks, breaks, loose parts,
missing parts, and/or malfunctions. Remove the product from service when any condition
develops that might make operation unsafe.
WARNING!
User Modifications
We cannot be responsible for modifications made by customers to our products in the field
without our supervision, testing, or evaluation.
147046
Mini Market
Made in Britain

2 of 7
2x
30mm Brass Hex.
Head Bolt
(77)
4x
50mm Brass Hex.
Head Bolt
(80)
1x
Side 1 1x
Side 2 1x Side 3 1x
Side 4
4x
Fixed Shelf 2x
Feet
2x
Kick Board
2x
Roof 2x Slide Out Shelf Ledge 2x Slide Out Shelf
1x
Large Counter Top
1x
Small Counter Top
1x
Blackboard
1x
Small Side
30x
35mm Brass Hex.
Head Bolt
(78)
1x
Drywipe board
Bolt Pack
2x
M6 Brass Bolt
Sleeve (No.105)
1x
4mm Allan Key
(102)
1x
5mm Allan Key
(103)
34x
M6 x 12.5mm x
10mm C=7.5mm
cross dowel (86)

3 Configuration
Options ABC
1
32x
No.86


3 of 7

23
Side 2
Side 1
Configurations A, B & C
Secure these parts using
5 x 35mm bolts
Configuration A
Use 2 x 50mm bolts to
secure the feet and
3 x 35mm bolts for the
other parts.
Configuration B & C
Do not assemble the
feet in this step.
Use 5 x 35mm bolts to
secure Side 1 to the
other parts.
Only use feet for
Configuration A
4 of 7

45
Configurations A, B & C
Secure the
blackboard and
small side using
4 x 35mm bolts
Configurations A, B & C
Use 4 x 35mm bolts after
sliding the large counter
top into place
67Side 4
Configurations A, B & C
Secure these parts using
5 x 35mm bolts Side 3
Configuration A
Use 2 x 50mm bolts to
secure the feet and
3 x 35mm bolts for the
other parts.
Configuration B & C
Do not assemble the
feet in this step.
Use 5 x 35mm bolts to
secure Side 4 to the
other parts.
Only use feet for
Configuration A
5 of 7

8930mm bolts
Configurations A, B & C
Slide the small counter top
in place and secure using
4 x 35mm bolts
Go to Step 9 for
Configurations B & C
Configuration A
Secure the smaller
unit to the larger unit
using 2 x 30mm
bolts
10
v
v
11 Configuration A
Secure the drywipe
panel using 2 x
35mm bolts.
Slide the 2 x
removable shelves
into position
Configuration A is
now complete
Configurations A, B & C
Go to step 11 for
Configuration B
Go to Step 12 for
Configuration C
6 of 7

13 Configuration C
Insert the 2 slide out
shelves before
positioning the 2
large sub-
assemblies together.
Secure one of the
feet using 2 x bolt
sleeves and 2 x
30mm bolts as
shown
Configuration C is
now complete
2 x Bolt sleeves
2 x 30mm bolts
12 Configuration B
Secure the 2 large
sub-assemblies
together using
2 x 30mm bolts and
2 x bolt sleeves.
Remove the
2 x 35mm bolts and
attach the feet using
2 x 50mm bolts as
shown.
Slide the 2 Sliding
shelves into their
slots
Configuration B is
now complete
2 x 30mm bolts
2 x Bolt sleeves
Remove the
2 x 35mm bolts
and attach the feet
using 2 x 50mm
bolts
7 of 7