Horizon Hobby SPMVC650 Spektrum User manual

NOTICE
All instructions, warranties and other collateral documents are subject to change at the sole
discretion of Horizon Hobby, LLC. For up-to-date product literature, visit horizonhobby.com and click
on the support tab for this product.
Meaning of Special Language
The following terms are used throughout the product literature to indicate various levels of potential
harm when operating this product:
NOTICE: Procedures, which if not properly followed,create a possibility of physical property damage
AND a little or no possibility of injury.
CAUTION: Procedures, which if not properly followed, create the probability of physical property
damage AND a possibility of serious injury.
WARNING: Procedures, which if not properly followed, create the probability of property damage,
collateral damage, and serious injury OR create a high probability of superficial injury.
WARNING: Read the ENTIRE instruction manual to become familiar with the features of the
product before operating. Failure to operate the product correctly can result in damage to
the product, personal property and cause serious injury.
This is a sophisticated hobby product. It must be operated with caution and common sense and
requires some basic mechanical ability. Failure to operate this Product in a safe and responsible
manner could result in injury or damage to the product or other property.This product is not
intended for use by children without direct adult supervision. Do not attempt disassembly, use with
incompatible components or augment product in any way without the approval of Horizon Hobby,
LLC. This manual contains instructions for safety, operation and maintenance. It is essential to
read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in
order to operate correctly and avoid damage or serious injury.
Age Recommendation: Not for children under 14 years. This is not a toy.
NOTICE: This product is only intended for use with unmanned, hobby-grade,remote-controlled
vehicles and aircraft. Horizon Hobby disclaims all liability outside of the intended purpose and will not
provide warranty service related thereto.
WARRANTY REGISTRATION
Visit www.spektrumrc.com/registration today to register your product.
650TVL CCD FPV Camera
Instruction Manual
Bedienungsanleitung
Manuel d’utilisation
Manuale di istruzioni
EN
5-22V GND VID OSD
MINI FPV CAM
UP
DOWN
MENU
LEFT RIGHT
5-22V GND VID OSD
MINI FPV CAM
5-22V GND VID OSD
MINI FPV CAM
UP
DOWN
MENU
LEFT RIGHT
5-22V GND VID OSD
MINI FPV CAM
5-22V GND VID OSD
MINI FPV CAM
UP
DOWN
MENU
LEFT RIGHT
5-22V GND VID OSD
MINI FPV CAM
Camera Back
OSD Switch
Back
3 Pin To Video
Transmitter
OSD Switch
Front
4 Pin Harness
• DC 5-22V in (Red)
• Ground wire (Black)
• Video in (Yellow)
• OSD (Green)
The Camera’s built in OSD can be controlled by the OSD Switch Board.The OSD Switch Board is
small enough to allow it to be installed in the aircraft with the camera if desired.
1. Mount the Camera in the aircraft using the included camera mount so that you have a clear
view in front of the aircraft.
2. Connect the camera to the OSD Switch board using the 4 pin wiring harness.
3. Connect the 3 pin wiring harness from the Video transmitter to the back of the OSD switch
board.
4. Power on the system.
To connect the camera directly to the video transmitter, plug the 3 pin wiring harness from the video
transmitter into the camera leaving the OSD pin open.
MENU: Push MENU (center button) to go to the main menu
UP/DOWN: Move up and down through the menu
Left/Right: Modify the menu parameters.
This function is used to adjust the brightness of the screen.
1. MANUAL: For use with a manual iris lens
2. DC: For use with a DC drive auto iris lens
3. VIDEO: For use with a video drive auto iris lens
1. ATW (Auto Tracking White Balance)- Ideal for color temps
from 1800ºK~10500ºK ( fluorescent light, outdoor,
sodium vapor lamp, etc.)
2. MANUAL- Select ATW and change to Manual mode.
• Red 0~255
• Blue 0~255
Select RETURN when finished.
• Auto mode
• Color model
• B/W MODE
• EXTERNAL SWITCH
1. COLOR TO B/W- When in External Control this can’t be
adjusted.
2. B/W TO COLOR- When in External Control this can’t be
adjusted.
3. DELAY TIME- Delay before color state begins to alternate.
• ENGLISH
• CHINESE
Saves all settings and exits to Main Menu.
Set the black point and white point.
1. BLC- Use when there is a strong backlight behind the
object.
2. HLC- Adjust level from 0~255
• Night
• Day
1. SHUTTER- Condition and speed control
• Auto: Shutter speed is controlled automatically ac-
cording to the brightness of the scene
• FIXED: Select shutter speeds from 1/50 to 1/100000
• FLK: Select when flickering occurs due to imbalance
between illumination and frequency. (Pal 1/100, NTSC
1/120)
2. BRIGHTNESS- Adjust brightness from 0-255
3. AGC- Depending on lightness of surroundings select
HIGH, MID, LOW or OFF.
4. DWDR- Depending on lightness of surroundings turn OFF
or ON (Adjust brightness from 0-63)
1. TITLE BACKGROUND- Set the Title Background.
2. NOITOM- Motion detection
• AREA: Set area to detect motion
• ENTER: Selecting ENTER will change the color of the
chossen area.
Repeat to choose other areas. After 1 second of inactivity it
will move to the next menu item.
3. PRIVACY- OFF/ON.
• AREA SEL: Set 4 privacy areas
• AREA STATE: Select AREA STATE ON to conceal AREA
selected. OFF to disable Privacy
• LEFT/RIGHT/TOP/BOTTOM: Select dimensions of each
privacy area by slider
• COLOR: Select the color of each privacy area
• RETURN: Return to previous menu
4. PARK LINE- OFF/ON
5. ADJ IMAGE-
• LENS SHARP: OFF/ON: 0~255
• 2DNR: OFF/ON
• MIRROR: Switch
• FONT COLOR: 0~51
• CONTRAST: 0~255
• SHARPNESS: 0~255
• DISPLAY CRT/LCD
• NEG IMAGE: OFF/ON
6. COMM ADJ
• CAM ID: Set camera ID from 0~255
• BAUD RATE: Set camera communication speed from
2400~38400
• PROTOCOL
• DISPLAY ID: OFF/ON
• ID POSITION
CAMERA-OSD SWITCH CONNECTION
CAMERA-VIDEO TRANSMITTER CONNECTION
OSD MENU
LENS
WHITE BALANCE
DAY & NIGHT
LANGUAGE
EXIT
DPC
BACKLIGHT
EXPOSURE
SPECIAL
5-22V GND VID OSD
MINI FPV CAM
UP
DOWN
MENU
LEFT RIGHT
5-22V GND VID OSD
MINI FPV CAM
CAUTION:If you are using ESC’s with active braking, we recommend powering the camera
system through a BEC or voltage regulator.
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
1. FACTORY- Return to camera’s initial settings
2. RETURN
RESET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
IMPORTANT: Consult local laws and ordinances before
operating FPV (first person view) equipment. In some
areas, FPV operation may be limited or prohibited.You
are responsible for operating this product in a legal and
responsible manner.
LIMITED WARRANTY
What this Warranty Covers - Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that
the product purchased (the “Product”) will be free from defects in materials and workmanship for
a period of 1 year from the date of purchase.
What is Not Covered - This warranty is not transferable and does not cover (i) cosmetic damage,
(ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due
to improper use, installation, operation or maintenance, (iii) modification of or to any part of the
Product, (iv) attempted service by anyone other than a Horizon Hobby authorized service center, (v)
Product not purchased from an authorized Horizon dealer, (vi) Product not compliant with applicable
technical regulations, or (vii) use that violates any applicable laws, rules, or regulations.
OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY OR
REPRESENTATION,AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING,WITHOUT
LIMITATION,THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE.THE PURCHASERACKNOWLEDGES THAT THEYALONE HAVE DETERMINED
THATTHE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER’S INTENDED USE.
Purchaser’s Remedy - Horizon’s sole obligation and purchaser’s sole and exclusive remedy shall
be that Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon
to be defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty
claim. Service or replacement decisions are at the sole discretion of Horizon. Proof of purchase
is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY.
Limitation of Liability - HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT,INCIDENTAL OR
CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY,
REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE,
STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OFTHE
POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed the individual
price of the Product on which liability is asserted. As Horizon has no control over use, setup, final
assembly,modification or misuse, no liability shall be assumed nor accepted for any resulting damage or
injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the purchaser
or user are not prepared to accept the liability associated with the use of the Product, purchaser is
advised to return the Product immediately in new and unused condition to the place of purchase.
Law - These terms are governed by Illinois law (without regard to conflict of law principals). This
warranty gives you specific legal rights, and you may also have other rights which vary from state to
state. Horizon reserves the right to change or modify this warranty at any time without notice.
WARRANTY SERVICES
Questions, Assistance, and Services - Your local hobby store and/or place of purchase cannot provide
warranty support or service. Once assembly, setup or use of the Product has been started, you must
contact your local distributor or Horizon directly.This will enable Horizon to better answer your questions
and service you in the event that you may need any assistance. For questions or assistance, please visit
our website at horizonhobby.com,submit an inquiry to [email protected] or call the
toll-free telephone number referenced in the Warranty and Service Contact Information section to speak
with a Product Support representative.
Inspection or Services - If this Product needs to be inspected or serviced and is compliant in the
country you live and use the Product in, please use the Horizon Online Service Request submission
process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA)
number. Pack the Product securely using a shipping carton. Please note that original boxes may
be included, but are not designed to withstand the rigors of shipping without additional protection.
Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not
responsible for merchandise until it arrives and is accepted at our facility.An Online Service Request
is available at http://www.horizonhobby.com/content/service-center_render-service-center. If you
do not have internet access, please contact Horizon Product Support to obtain a RMA number along
with instructions for submitting your product for service. When calling Horizon, you will be asked
to provide your complete name, street address, email address and phone number where you can
be reached during business hours. When sending product into Horizon, please include your RMA
number, a list of the included items, and a brief summary of the problem. A copy of your original
sales receipt must be included for warranty consideration. Be sure your name, address, and RMA
number are clearly written on the outside of the shipping carton.
Provided warranty conditions have been met, your Product will be serviced or replaced free of charge.
Service or replacement decisions are at the sole discretion of Horizon.
WARRANTY AND SERVICE CONTACT INFORMATION
Country of
Purchase Horizon Hobby Contact Information Address
United States of
America
Horizon Service Center
(Repairs and Repair
Requests)
servicecenter.
horizonhobby.com/
RequestForm/
4105 Fieldstone Rd
Champaign, Illinois,
61822 USA
Horizon Product Support
(Product Technical
Assistance)
productsupport@
horizonhobby.com.
877-504-0233
Sales
websales@horizonhobby.
com
800-338-4639
United Kingdom Service/Parts/Sales:
Horizon Hobby Limited
sales@horizonhobby.
co.uk
Units 1–4, Ployters Rd,
Staple Tye
Harlow, Essex, CM18
7NS, United Kingdom
[phone]
Germany
Horizon Technischer
Service [email protected] Christian-Junge-
Straße 1
25337 Elmshorn,
Germany
Sales: Horizon Hobby
GmbH [phone]
France Service/Parts/Sales:
Horizon Hobby SAS
infofrance@horizonhobby.
com
11 Rue Georges
Charpak
77127 Lieusaint,
France
[phone]
EU Compliance Statement: Horizon
Hobby,LLC hereby declares that this
product is in compliance with the es-
sential requirements and other relevant provisions
of the EMC Directive.
A copy of the EU Declaration of Conformity is
available online at:
http://www.horizonhobby.com/content/support-
render-compliance.
Instructions for disposal of WEEE by
users in the European Union
This product must not be disposed of with
other waste. Instead, it is the user’s responsibility
to dispose of their waste equipment by handing it
over to a designated collections point for the recy-
cling of waste electrical and electronic equipment.
The separate collection and recycling of your
waste equipment at the time of disposal will help
to conserve natural resources and ensure that it is
recycled in a manner that protects human health
and the environment. For more information about
where you can drop off your waste equipment for
recycling, please contact your local city office,
your household waste disposal service or where
you purchased the product.
5-14-2015
NOTICE: Do not ship LiPo batteries to Horizon.If you have any issue with a LiPo battery,
please contact the appropriate Horizon Product Support office. Warranty Requirements- For
Warranty consideration, you must include your original sales receipt verifying the proof-of-
purchase date.
Non-Warranty Service -
Should your service not be covered by warranty, service will be completed and payment will be
required without notification or estimate of the expense unless the expense exceeds 50% of the
retail purchase cost. By submitting the item for service you are agreeing to payment of the service
without notification. Service estimates are available upon request. You must include this request
with your item submitted for service. Non-warranty service estimates will be billed a minimum of
½ hour of labor. In addition you will be billed for return freight. Horizon accepts money orders and
cashier’s checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting
any item to Horizon for service, you are agreeing to Horizon’s Terms and Conditions found on our
website http://www.horizonhobby.com/content/service-center_render-service-center.
ATTENTION: Horizon service is limited to Product compliant in the country of use and
ownership. If received,a non-compliant Product will not be serviced. Further, the sender will
be responsible for arranging return shipment of the un-serviced Product, through a carrier of
the sender’s choice and at the sender’s expense. Horizon will hold non-compliant Product for
a period of 60 days from notification, after which it will be discarded.
53493

HINWEIS
Alle Anweisungen, Garantien und anderen zugehörigen Dokumente können im eigenen Ermessen
von Horizon Hobby, LLC jederzeit geändert werden. Die aktuelle Produktliteratur finden Sie auf
horizonhobby.com unter der Registerkarte „Support“ für das betreffende Produkt.
Spezielle Bedeutungen
Die folgenden Begriffe werden in der gesamten Produktliteratur verwendet, um auf unterschiedlich
hohe Gefahrenrisiken beim Betrieb dieses Produkts hinzuweisen:
HINWEIS: Wenn diese Verfahren nicht korrekt befolgt werden, können sich möglicherweise
Sachschäden UND geringe oder keine Gefahr von Verletzungen ergeben.
ACHTUNG: Wenn diese Verfahren nicht korrekt befolgt werden, ergeben sich wahrscheinlich
Sachschäden UND die Gefahr von schweren Verletzungen.
WARNUNG: Wenn diese Verfahren nicht korrekt befolgt werden, ergeben sich wahrscheinlich
Sachschäden, Kollateralschäden und schwere Verletzungen ODER mit hoher Wahrscheinlichkeit
oberflächliche Verletzungen.
WARNUNG: Lesen Sie die GESAMTE Bedienungsanleitung, um sich vor dem Betrieb mit
den Produktfunktionen vertraut zu machen. Wird das Produkt nicht korrekt betrieben, kann
dies zu Schäden am Produkt oder persönlichem Eigentum führen oder schwere
Verletzungen verursachen.
Dies ist ein hochentwickeltes Hobby-Produkt. Es muss mit Vorsicht und gesundem Menschen-
verstand betrieben werden und benötigt gewisse mechanische Grundfähigkeiten. Wird dieses
Produkt nicht auf eine sichere und verantwortungsvolle Weise betrieben, kann dies zu Verletzun-
gen oder Schäden am Produkt oder anderen Sachwerten führen. Dieses Produkt eignet sich nicht
für die Verwendung durch Kinder ohne direkte Überwachung eines Erwachsenen.Versuchen Sie
nicht ohne Genehmigung durch Horizon Hobby, LLC, das Produkt zu zerlegen, es mit inkompati-
blen Komponenten zu verwenden oder auf jegliche Weise zu erweitern. Diese Bedienungsanlei-
tung enthält Anweisungen für Sicherheit, Betrieb und Wartung. Es ist unbedingt notwendig, vor
Zusammenbau, Einrichtung oder Verwendung alle Anweisungen und Warnhinweise im Handbuch
zu lesen und zu befolgen, damit es bestimmungsgemäß betrieben werden kann und Schäden
oder schwere Verletzungen vermieden werden.
Nicht geeignet für Kinder unter 14 Jahren. Dies ist kein Spielzeug.
HINWEIS: Dieses Produkt ist ausschließlich für die Verwendung in
unbemanten, ferngesteuerten Fahrzeugen und Fluggeräten im Hobbybereich vorgesehen. Horizon
Hobby lehnt jede Haftung und Garantieleistung ausserhalb der vorgesehen Verwendung ab.
Garantie Registrierung
Registrieren Sie bitte Ihr Produkt unter www.spektrumrc.com/registration.
DE
5-22V GND VID OSD
MINI FPV CAM
UP
DOWN
MENU
LEFT RIGHT
5-22V GND VID OSD
MINI FPV CAM
5-22V GND VID OSD
MINI FPV CAM
UP
DOWN
MENU
LEFT RIGHT
5-22V GND VID OSD
MINI FPV CAM
Kamerarückseite
OSD Schalter
Rückseite
3-adriges Kabel zum
Videosender
OSD Schalter
Vorderseite
4-adriges Kabel
• DC 5-22V Eingang (rot)
• Masse (schwarz)
• Video in (gelb)
• OSD (grün)
Das in der Kamera eingebaute OSD Menü kann über den OSD Taster bedient werden. Dieses Bedi-
enteil ist so klein, dass es zusammen mit der Kamera im Luftfahrzeug eingebaut werden kann.
1. Montieren Sie die Kamera in dem Luftfahrzeug mit dem im Lieferumfang befindlichen Kam-
erahalter, so dass Sie eine gute Sicht nach vorne haben.
2. Schließen Sie die Kamera an das OSD Schalter Board mit dem 4 poligen Stecker an.
3. Schließen Sie den 3 poligen Stecker des Videosenders an die Buchse auf der Rückseite an.
4. Schalten Sie das System ein.
Um die Kamera direkt an den Videosender anzuschließen stecken Sie das 3-polige Kabel vom
Videosender in die Kamera und lassen den OSD Pin unbelegt.
Menü: Drücken Sie Menu (mittlerer Button) um das Hauptmenü aufzurufen.
UP/DOWN: Bewegen Sie sich im Menü rauf (up) oder runter (down).
Left/Right: links/rechts; ändern der Menüparameter
Mit dieser Funktion wird die Helligkeit des Bildes geregelt.
1. Manual: Für Verwendung mit einer manuellen Linse.
2. DC: Für Verwendung mit einer DC angetriebenen
Linse.
3. VIDEO: Für die Verwendung mit einer Video Auto
Linse.
1. ATW- Ideal für Farbtemperaturen von 1800°K - 10500°K.
Flurorezierendes Licht, Natriumdampflampe etc.
2. MANUAL- Wählen Sie ATW und ändern Sie auf den
Manual Mode.
• rot 0-255
• blau 0 255
Wählen Sie nach Auswahl Return.
• Auto mode
• Color model
• B/W MODE
• EXTERNAL SWITCH
1. COLOR TO B/W- (Farbe auf SW) Kann nicht bei externer
Kontrolle gewählt werden.
2. B/W TO COLOR- (SW auf Farbe) Kann nicht bei externer
Kontrolle gewählt werden.
3. DELAY TIME- Verzögerung bevor sich der Farbzustand
verändert.
• ENGLISH
• CHINESE
Saves all settings and exits to Main Menu.
Regelt den schwarzen und weissen Punkt.
1. BLC- Verwenden Sie die Funktion wenn sich hinter dem
Objekt eine Lichtquelle befindet.
2. HLC- Justieren Sie den Level von 0 -255
• Night/ Nacht
• Day/Tag
1. Shutter (Blende): Einstellung und Geschwindigkeit
• Auto: Die Blendengeschwindigkeit wird automatisch
nach der Helligkeit geregelt.
• FIXED: Wählt die Blende von 1/50 bis 1/100000
• FLK: Wählen Sie FLK wenn eine Disbalance zwischen
Beleuchtung und Frequenz besteht.(Pal 1/100,
NTSC 1/20)
2. BRIGHTNESS- Justieren Sie die Helligkeit von 0- 255.
3. AGC- Je nach Umgebungshelligkeit wählen Sie HIGH,
MID, LOW oder OFF
4. DWDR- Je nach Umgebungshelligkeit wählen Sie OFF
oder ON (Justieren Sie die Helligkeit von 0 -63)
1. TITLE BACKGROUND- Stellen Sie den Titelhintergrund ein.
2. NOITOM- Bewegungserkennung
• AREA: Regelt die Zone der Bewegungserkennung.
• ENTER: Nach Auswahl ändert sich die Farbe der
gewählten Zone.
Wiederholen Sie das um eine andere Zone zu wählen. Nach
1 Sekunde Inaktivität springt das Menü einen Punkt weiter.
3. PRIVACY- OFF/ON.
• AREA SEL: Wählen Sie aus 4 Privatzonen Einstellungen.
• AREA STATE: Wählen Sie AREA STATE ON um die
AREA Funktion zu verdecken. OFF deaktiviert die
Privat Funktion.
• LEFT/RIGHT/TOP/BOTTOM: Wählen Sie mit dem
Schieber die Abmessungen der verdeckten Privatzone.
• COLOR: Wählen Sie die Farbe der Privatzone / Balken.
• RETURN: Wechseln Sie in das vorherige Menü.
4. PARK LINE- (Aus) /ON (Ein)
5. ADJ IMAGE / EINSTELLUNGEN BILD-
• LENS SHARP: / Schärfe: OFF/ON: 0~255
• 2DNR: OFF/ON
• MIRROR: / Gespiegelt: Schalter
• FONT COLOR: / FARBE: 0~51
• CONTRAST: 0~255
• SHARPNESS: 0~255
• DISPLAY CTR /LCD
• NEG IMAGE: AUS/EIN
6. COMM ADJ (ALLGEMEINE EINSTELLUNGEN)
• CAM ID: Wählen Sie die ID von 0- 255
• BAUD RATE:Wählen Sie die Übertragungsgeschwind-
igkeit von 2400- 38400
• PROTOCOL
• DISPLAY ID: OFF/ON
• ID POSITION
OSD SCHALTERANSCHLUSS
ANSCHLUSS DER KAMERA AN DEN VIDEOSENDER
OSD MENÜ
LENS
WHITE BALANCE (WEISSABGLEICH)
DAY & NIGHT / TAG & NACHT
LANGUAGE
EXIT
DPC
BACKLIGHT
EXPOSURE
SPECIAL / SPEZIAL
5-22V GND VID OSD
MINI FPV CAM
UP
DOWN
MENU
LEFT RIGHT
5-22V GND VID OSD
MINI FPV CAM
ACHTUNG:Sollten Sie einen Regler/ESC mit aktiver Bremse verwenden empfehlen wir die
Kamera über das BEC oder einen Spannungsregler zu betreiben.
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
1. FACTORY- Return to camera’s initial settings
2. RETURN
RESET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
GARANTIE UND SERVICE INFORMATIONEN
Garantiezeitraum
Exklusive Garantie ¬ Horizon Hobby LLC (Horizon) garantiert, dass das gekaufte Produkt frei von
Material- und Montagefehlern ist. Der Garantiezeitraum entspricht den gesetzlichen Bestimmung des
Landes, in dem das Produkt erworben wurde. In Deutschland beträgt der Garantiezeitraum 6 Monate
und der Gewährleistungszeitraum 18 Monate nach dem Garantiezeitraum.
Einschränkungen der Garantie
(a) Die Garantie wird nur dem Erstkäufer (Käufer) gewährt und kann nicht übertragen werden. Der
Anspruch des Käufers besteht in der Reparatur oder dem Tausch im Rahmen dieser Garantie. Die
Garantie erstreckt sich ausschließlich auf Produkte, die bei einem autorisierten Horizon Händler
erworben wurden. Verkäufe an dritte werden von dieser Garantie nicht gedeckt. Garantieansprüche
werden nur angenommen, wenn ein gültiger Kaufnachweis erbracht wird. Horizon behält sich das
Recht vor, diese Garantiebestimmungen ohne Ankündigung zu ändern oder modifizieren und widerruft
dann bestehende Garantiebestimmungen.
(b) Horizon übernimmt keine Garantie für die Verkaufbarkeit des Produktes, die Fähigkeiten und die
Fitness des Verbrauchers für einen bestimmten Einsatzzweck des Produktes. Der Käufer allein ist dafür
verantwortlich, zu prüfen, ob das Produkt seinen Fähigkeiten und dem vorgesehenen Einsatzzweck
entspricht.
(c) Ansprüche des Käufers ¬ Es liegt ausschließlich im Ermessen von Horizon, ob das Produkt, bei
dem ein Garantiefall festgestellt wurde, repariert oder ausgetauscht wird. Dies sind die exklusiven
Ansprüche des Käufers, wenn ein Defekt festgestellt wird.
Horizon behält sich vor, alle eingesetzten Komponenten zu prüfen, die in den Garantiefall einbezogen
werden können. Die Entscheidung zur Reparatur oder zum Austausch liegt nur bei Horizon. Die
Garantie schließt kosmetische Defekte oder Defekte, hervorgerufen durch höhere Gewalt, falsche
Behandlung des Produktes, falscher Einsatz des Produktes, kommerziellen Einsatz oder Modifikationen
irgendwelcher Art aus.
Die Garantie schließt Schäden, die durch falschen Einbau, falsche Handhabung, Unfälle, Betrieb,
Service oder Reparaturversuche, die nicht von Horizon ausgeführt wurden aus. Rücksendungen durch
den Käufer direkt an Horizon oder eine seiner Landesvertretung bedürfen der Schriftform.
Schadensbeschränkung
Horizon ist nicht für direkte oder indirekte Folgeschäden, Einkommensausfälle oder kommerzielle
Verluste, die in irgendeinem Zusammenhang mit dem Produkt stehen verantwortlich, unabhängig ab
ein Anspruch im Zusammenhang mit einem Vertrag, der Garantie oder der Gewährleistung erhoben
werden. Horizon wird darüber hinaus keine Ansprüche aus einem Garantiefall akzeptieren, die über
den individuellen Wert des Produktes hinaus gehen. Horizon hat keinen Einfluss auf den Einbau, die
Verwendung oder die Wartung des Produktes oder etwaiger Produktkombinationen, die vom Käufer
gewählt werden. Horizon übernimmt keine Garantie und akzeptiert keine Ansprüche für in der folge
auftretende Verletzungen oder Beschädigungen. Mit der Verwendung und dem Einbau des Produktes
akzeptiert der Käufer alle aufgeführten Garantiebestimmungen ohne Einschränkungen und Vorbehalte.
Wenn Sie als Käufer nicht bereit sind, diese Bestimmungen im Zusammenhang mit der Benutzung
des Produktes zu akzeptieren, werden Sie gebeten, dass Produkt in unbenutztem Zustand in der
Originalverpackung vollständig bei dem Verkäufer zurückzugeben.
Sicherheitshinweise
Dieses ist ein hochwertiges Hobby Produkt und kein Spielzeug. Es muss mit Vorsicht und Umsicht
eingesetzt werden und erfordert einige mechanische wie auch mentale Fähigkeiten. Ein Versagen,
das Produkt sicher und umsichtig zu betreiben kann zu Verletzungen von Lebewesen und
Sachbeschädigungen erheblichen Ausmaßes führen. Dieses Produkt ist nicht für den Gebrauch
durch Kinder ohne die Aufsicht eines Erziehungsberechtigten vorgesehen. Die Anleitung enthält
Sicherheitshinweise und Vorschriften sowie Hinweise für die Wartung und den Betrieb des Produktes.
Es ist unabdingbar, diese Hinweise vor der ersten Inbetriebnahme zu lesen und zu verstehen. Nur so
kann der falsche Umgang verhindert und Unfälle mit Verletzungen und Beschädigungen vermieden
werden.
Fragen, Hilfe und Reparaturen
Ihr lokaler Fachhändler und die Verkaufstelle können eine Garantiebeurteilung ohne Rücksprache
mit Horizon nicht durchführen. Dies gilt auch für Garantiereparaturen. Deshalb kontaktieren Sie in
einem solchen Fall den Händler, der sich mit Horizon kurz schließen wird, um eine sachgerechte
Entscheidung zu fällen, die Ihnen schnellst möglich hilft.
Wartung und Reparatur
5-14-2015
Muss Ihr Produkt gewartet oder repariert werden, wenden Sie sich entweder an Ihren Fachhändler
oder direkt an Horizon. Rücksendungen / Reparaturen werden nur mit einer von Horizon vergebenen
RMA Nummer bearbeitet. Diese Nummer erhalten Sie oder ihr Fachhändler vom technischen Service.
Mehr Informationen dazu erhalten Sie im Serviceportal unter www. Horizonhobby.de oder telefonisch
bei dem technischen Service von Horizon.
Packen Sie das Produkt sorgfältig ein. Beachten Sie, dass der Originalkarton in der Regel nicht
ausreicht, um beim Versand nicht beschädigt zu werden. Verwenden Sie einen Paketdienstleister
mit einer Tracking Funktion und Versicherung, da Horizon bis zur Annahme keine Verantwortung für
den Versand des Produktes übernimmt. Bitte legen Sie dem Produkt einen Kaufbeleg bei, sowie eine
ausführliche Fehlerbeschreibung und eine Liste aller eingesendeten Einzelkomponenten. Weiterhin
benötigen wir die vollständige Adresse, eine Telefonnummer für Rückfragen, sowie eine Email Adresse.
Garantie und Reparaturen
Garantieanfragen werden nur bearbeitet, wenn ein Originalkaufbeleg von einem autorisierten
Fachhändler beiliegt, aus dem der Käufer und das Kaufdatum hervorgeht. Sollte sich ein Garantiefall
bestätigen wird das Produkt repariert oder ersetzt. Diese Entscheidung obliegt einzig Horizon Hobby.
Kostenpflichtige Reparaturen
Liegt eine kostenpflichtige Reparatur vor, erstellen wir einen Kostenvoranschlag, den wir Ihrem Händler
übermitteln. Die Reparatur wird erst vorgenommen, wenn wir die Freigabe des Händlers erhalten. Der
Preis für die Reparatur ist bei Ihrem Händler zu entrichten. Bei kostenpflichtigen Reparaturen werden
mindestens 30 Minuten Werkstattzeit und die Rückversandkosten in Rechnung gestellt. Sollten wir
nach 90 Tagen keine Einverständniserklärung zur Reparatur vorliegen haben, behalten wir uns vor, das
Produkt zu vernichten oder anderweitig zu verwerten.
Achtung: Kostenpflichtige Reparaturen nehmen wir nur für Elektronik und Motoren vor.
Mechanische Reparaturen, besonders bei Hubschraubern und RC-Cars sind extrem
aufwendig und müssen deshalb vom Käufer selbst vorgenommen werden.
GARANTIE UND SERVICE KONTAKTINFORMATIONEN
Land des Kauf Horizon Hobby Kontaktinformationen Adresse
Deutschland
Horizon Technischer
Service
[phone]
service@horizonhobby.
de
Christian-Junge-Straße
1
25337 Elmshorn
Horizon Hobby GmbH
Konformitätshinweise für die Europäische Union
EU Konformitätserklärung
Horizon LLC erklärt hiermit, dass dieses Produkt konform zu den essentiellen Anforderungen
der EMC Direktive.
Eine Kopie der Konformitätserklärung ist online unter folgender Adresse verfügbar :
http://www.horizonhobby.com/content/support-render-compliance.
Entsorgung in der Europäischen Union
Dieses Produkt darf nicht über den Hausmüll entsorgt werden. Es ist die Verantwortung des
Benutzers, dass Produkt an einer registrierten Sammelstelle für Elektroschrott abzugeben
diese Verfahren stellt sicher, dass die Umwelt geschont wird und natürliche Ressourcen nicht über
die Gebühr beansprucht werden. Dadurch wird das Wohlergehen der menschlichen Gemeinschaft
geschützt. Für weitere Informationen,wo der Elektromüll entsorgt werden kann, können Sie Ihr Stadt-
büro oder Ihren lokalen Entsorger kontaktieren.
53493

REMARQUE
La totalité des instructions, garanties et autres documents est sujette à modification à la seule
discrétion d’Horizon Hobby, LLC. Pour obtenir la documentation àjour, rendez-vous sur le site
horizonhobby.com et cliquez sur l’onglet de support de ce produit.
Signification de certains termes spécifiques
Les termes suivants sont utilisés dans l’ensemble du manuel pour indiquer différents niveaux de
danger lors de l’utilisation de ce produit:
REMARQUE: Procédures qui, si elles ne sont pas suivies correctement, peuvent entraîner des
dégâts matériels ET éventuellement un faible risque de blessures.
ATTENTION: Procédures qui, si elles ne sont pas suivies correctement, peuvent entraîner des
dégâts matériels ET des blessures graves.
AVERTISSEMENT: Procédures qui, si elles ne sont pas suivies correctement, peuvent entraîner
des dégâts matériels et des blessures graves OU engendrer une probabilité élevée de blessure
superficielle.
AVERTISSEMENT: Lisez la TOTALITÉ du manuel d’utilisation afin de vous familiariser avec
les caractéristiques du produit avant de le faire fonctionner. Une utilisation incorrecte du
produit peut entraîner sa détérioration, ainsi que des risques de dégâts matériels, voire de
blessures graves.
Ceci est un produit de loisirs sophistiqué. Il doit être manipulé avec prudence et bon sens et
requiert des aptitudes de base en mécanique. Toute utilisation irresponsable de ce produit ne
respectant pas les principes de sécurité peut provoquer des blessures, entraîner des dégâts
matériels et endommager le produit. Ce produit n’est pas destiné à être utilisé par des enfants
sans la surveillance directe d’un adulte. N’essayez pas de démonter le produit, de l’utiliser avec
des composants incompatibles ou d’en améliorer les performances sans l’accord d’Horizon
Hobby, LLC. Ce manuel comporte des instructions relatives à la sécurité, au fonctionnement et
à l’entretien. Il est capital de lire et de respecter la totalité des instructions et avertissements
du manuel avant l’assemblage, le réglage et l’utilisation, ceci afin de manipuler correctement
l’appareil et d’éviter tout dégât matériel ou toute blessure grave.
14 ans et plus. Ceci n’est pas un jouet.
Remarque : Ce produit est uniquement réservé à une utilisation avec des modèles réduits
radiocommandés de loisir. Horizon Hobby se dégage de toute responsabilité et garantie si le produit
est utilisé d’autre manière que celle citée précédemment.
GARANTIE ET ENREGISTREMENT
Veuillez visiter www.spektrumrc.com/registration pour enregistrer en ligne votre produit.
FR
5-22V GND VID OSD
MINI FPV CAM
UP
DOWN
MENU
LEFT RIGHT
5-22V GND VID OSD
MINI FPV CAM
5-22V GND VID OSD
MINI FPV CAM
UP
DOWN
MENU
LEFT RIGHT
5-22V GND VID OSD
MINI FPV CAM
Arrière de la
caméra
Arrière de la
platine OSD
3 broches vers
l’émetteur vidéo
Avant de la
platine OSD
Faisceau de câble 4
broches
• DC 5-22V (Rouge)
• Fil de terre (Noire)
• Entrée vidéo (Jaune)
• OSD (Vert)
L’OSD intégré de la caméra peut être contrôlé par la platine OSD. Celle-ci est assez petite pour vous
permettre de l’installer dans l’aéronef si vous le désirez.
1. Installez la caméra dans l’aéronef à l’aide du support caméra inclus de manière à avoir une
vue dégagée à l’avant de l’aéronef.
2. Connectez la caméra à la platine OSD à l’aide du faisceau de câblage à 4 broches.
3. Connectez le faisceau de câblage à 3 broches de l’émetteur vidéo à l’arrière de la platine
OSD.
4. Mettez le système sous tension.
Pour connecter la caméra directement à l’émetteur vidéo, branchez le faisceau de câblage à 3
broches de l’émetteur vidéo sur la caméra en laissant la prise OSD libre.
MENU: Appuyez sur MENU (bouton au centre) pour accéder au
menu principal
UP/DOWN: Montez ou descendez dans le menu
Left/Right: Modifiez les paramètres du menu.
Cette fonction sert à régler la luminosité de l’écran
1. MANUAL (Manuel): pour une utilisation avec un
objectif à diaphragme manuel
2. DC: pour une utilisation avec un objectif à diaphragme
automatique DC
3. VIDEO: pour une utilisation avec un objectif à dia-
phragme automatique vidéo
1. ATW Auto Tracking White Balance (Réglage automatique
de la balance des blancs) Idéal pour les températures de
couleurs de 1800°K à 10500°K (lumière fluorescente,
extérieur, lampe à vapeur de sodium, etc.)
2. MANUAL (MANUEL) - Sélectionnez ATW et changez en
mode Manuel.
• Rouge 0-255
• Bleu 0-255
Sélectionnez RETURN une fois que vous avez terminé.
• Mode automatique
• Mode couleur
• MODE B/W
• INTERRUPTEUR EXTERNE
1. COULEUR À B/W - En commande externe, ceci ne peut
pas être réglé.
2. B/W À COULEUR- En commande externe, ceci ne peut
pas être réglé.
3. DÉLAI - Temporisation avant que la couleur commence
à changer.
• ANGLAIS
• CHINOIS
Sauvegarde tous les réglages et vous permet de sortir
du Menu principal.
Réglez le point noir et point blanc.
1. BLC - Utilisez lorsqu’il y a beaucoup de contre-jour
derrière l’objet .
2. HLC - Réglez le niveau de 0 à 255
• Nuit
• Jour
1. SHUTTER (OBTURATEUR) - COMMANDE DES CONDI-
TIONS ET DE LA VITESSE
• Auto: La vitesse de l’obturateur est contrôlé automa-
tiquement selon la luminosité.
• FIXED (FIXE): RÉGLEZ LA VITESSE DE L’OBTURATEUR
DE 1/50 À 1/100000.
• FLK: Sélectionnez lorsqu’il y a des changements dus à
un déséquilibre entre l’éclairage et la fréquence. (Pal
1/100, NTSC 1/120)
2. BRIGHTNESS - RÉGLEZ LA CLARTÉ DE 0 À 255.
3. AGC - Réglez sur High, Mid, Low ou Off selon la luminosité.
4. DWDR - Mettez-le -le sur ON ou OFF selon la luminosité
(Réglez la clarté de 0 à 63)
1. TITLE BACKGROUND (FOND DU TITRE) - Réglez le fond
du titre.
2. NOITOM - Détection de mouvement
• AREA (ZONE) - Réglez la zone de détection de mouve-
ment
• ENTER (ENTRÉE) - Sélectionner ENTER changera le
couleur de la zone sélectionnée.
Répétez pour sélectionner d’autres zones. Au bout d’1 sec-
onde d’inactivité, il passera à la section suivante du menu.
3. PRIVACY (ZONE PROTÉGÉE) - ON-OFF.
• AREA SEL: Réglez 4 zones privées protégées
• AREA STATE: Mettez AREA STATE sur ON pour cacher
la zone sélectionnée. Mettez sur OFF pour désactiver.
• LEFT/RIGHT/TOP/BOTTOM (gauche/droite/haut/bas):
Sélectionnez les dimensions de chaque zone privée
protégée avec le curseur.
• COLOR (Couleur): Sélectionnez la couleur de chaque
zone privée protégée
• RETURN (Retour): Retour au menu précédent
4. PARK LINE - ON-OFF
5. ADJ IMAGE (RÉGLAGES IMAGE)
• LENS SHARP (Netteté lentille): ON-OFF: 0-255
• 2DNR: ON-OFF
• MIRROR (Miroir): Interrupteur
• FONT COLOR (Couleur de police): 0-51
• CONTRAST (Contraste): 0-255
• SHARPNESS (Netteté): 0-255
• DISPLAY CRT/LCD (Affichage CRT/LCD)
• NEG IMAGE (Image négative): ON/OFF
6. COMMON ADJ (RÉGLAGES ORDINAIRES)
• CAM ID (Identifiant caméra): Réglez l’identifiant de la
caméra de 0 à 255.
• BAUD RATE (Débit baud): réglez la vitesse de trans-
mission caméra de 2400 à 38400
• PROTOCOL (Protocole)
• DISPLAY ID (Affichage identifiant): ON/OFF
• ID POSITION (Position identifiant)
CONNEXION PLATINE OSD ET CAMÉRA
CONNEXION DE L’ÉMETTEUR VIDÉO ET LA CAMÉRA
MENU OSD
LENS (LENTILLE)
WHITE BALANCE (BALANCE DES BLANCS)
DAY & NIGHT (JOUR ET NUIT)
LANGUAGES (LANGUES)
EXIT (SORTIE)
DPC
BACKLIGHT (CONTRE-JOUR)
EXPOSURE (EXPOSITION)
SPECIAL
5-22V GND VID OSD
MINI FPV CAM
UP
DOWN
MENU
LEFT RIGHT
5-22V GND VID OSD
MINI FPV CAM
ATTENTION:Si vous utilisez des contrôleurs avec freinage actif, nous vous recommandons de
mettre la caméra sous tension via BEC ou un régulateur de tension.
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
1. FACTORY (Usine) - Remet les réglages par défaut
d’usine
2. RETURN (Retour)
RESET (RÉINITIALISATION)
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
GARANTIE ET RÉPARATIONS
Durée de la garantie
Garantie exclusive - Horizon Hobby, Inc. (Horizon) garantit que le Produit acheté (le « Produit ») sera
exempt de défauts matériels et de fabrication à sa date d’achat par l’Acheteur. La durée de garantie
correspond aux dispositions légales du pays dans lequel le produit a été acquis. La durée de garantie
est de 6 mois et la durée d’obligation de garantie de 18 mois à l’expiration de la période de garantie.
Limitations de la garantie
(a) La garantie est donnée à l’acheteur initial (« Acheteur ») et n’est pas transférable. Le recours de
l’acheteur consiste en la réparation ou en l‘échange dans le cadre de cette garantie. La garantie
s’applique uniquement aux produits achetés chez un revendeur Horizon agréé. Les ventes faites à
des tiers ne sont pas couvertes par cette garantie. Les revendications en garantie seront acceptées
sur fourniture d’une preuve d’achat valide uniquement. Horizon se réserve le droit de modifier les
dispositions de la présente garantie sans avis préalable et révoque alors les dispositions de garantie
existantes.
(b) Horizon n’endosse aucune garantie quant à la vendabilité du produit ou aux capacités et à la
forme physique de l’utilisateur pour une utilisation donnée du produit. Il est de la seule responsabilité
de l’acheteur de vérifier si le produit correspond à ses capacités et à l’utilisation prévue.
(c) Recours de l’acheteur – Il est de la seule discrétion d‘Horizon de déterminer si un produit
présentant un cas de garantie sera réparé ou échangé. Ce sont là les recours exclusifs de l’acheteur
lorsqu’un défaut est constaté.
Horizon se réserve la possibilité de vérifier tous les éléments utilisés et susceptibles d’être intégrés
dans le cas de garantie. La décision de réparer ou de remplacer le produit est du seul ressort
d’Horizon. La garantie exclut les défauts esthétiques ou les défauts provoqués par des cas de force
majeure, une manipulation incorrecte du produit, une utilisation incorrecte ou commerciale de ce
dernier ou encore des modifications de quelque nature qu’elles soient.
La garantie ne couvre pas les dégâts résultant d’un montage ou d’une manipulation erronés,
d’accidents ou encore du fonctionnement ainsi que des tentatives d’entretien ou de réparation non
effectuées par Horizon. Les retours effectués par le fait de l’acheteur directement à Horizon ou à l’une
de ses représentations nationales requièrent une confirmation écrite.
Limitation des dégâts
Horizon ne saurait être tenu pour responsable de dommages conséquents directs ou indirects, de
pertes de revenus ou de pertes commerciales, liés de quelque manière que ce soit au produit et ce,
indépendamment du fait qu’un recours puisse être formulé en relation avec un contrat, la garantie ou
l’obligation de garantie. Par ailleurs, Horizon n’acceptera pas de recours issus d’un cas de garantie
lorsque ces recours dépassent la valeur unitaire du produit. Horizon n’exerce aucune influence sur
le montage, l’utilisation ou la maintenance du produit ou sur d’éventuelles combinaisons de produits
choisies par l’acheteur. Horizon ne prend en compte aucune garantie et n‘accepte aucun recours pour
les blessures ou les dommages pouvant en résulter. En utilisant et en montant le produit, l’acheteur
accepte sans restriction ni réserve toutes les dispositions relatives à la garantie figurant dans le
présent document.
Si vous n’êtes pas prêt, en tant qu’acheteur, à accepter ces dispositions en relation avec l’utilisation
du produit, nous vous demandons de restituer au vendeur le produit complet, non utilisé et dans son
emballage d’origine.
Indications relatives à la sécurité
Ceci est un produit de loisirs perfectionné et non un jouet. Il doit être utilisé avec précaution et bon
sens et nécessite quelques aptitudes mécaniques ainsi que mentales. L’incapacité à utiliser le produit
de manière sûre et raisonnable peut provoquer des blessures et des dégâts matériels conséquents.
Ce produit n’est pas destiné à être utilisé par des enfants sans la surveillance par un tuteur. La notice
d’utilisation contient des indications relatives à la sécurité ainsi que des indications concernant la
maintenance et le fonctionnement du produit. Il est absolument indispensable de lire et de comprendre
ces indications avant la première mise en service. C’est uniquement ainsi qu’il sera possible d’éviter
une manipulation erronée et des accidents entraînant des blessures et des dégâts.
Questions, assistance et réparations
Votre revendeur spécialisé local et le point de vente ne peuvent effectuer une estimation d’éligibilité à
l’application de la garantie sans avoir consulté Horizon. Cela vaut également pour les réparations sous
garantie. Vous voudrez bien, dans un tel cas, contacter le revendeur qui conviendra avec Horizon d’une
décision appropriée, destinée à vous aider le plus rapidement possible.
Maintenance et réparation
Si votre produit doit faire l’objet d’une maintenance ou d‘une réparation, adressez-vous soit à votre
revendeur spécialisé, soit directement à Horizon. Emballez le produit soigneusement. Veuillez noter
que le carton d‘emballage d’origine ne suffit pas, en règle générale, à protéger le produit des dégâts
pouvant survenir pendant le transport. Faites appel à un service de messagerie proposant une fonction
de suivi et une assurance, puisque Horizon ne prend aucune responsabilité pour l’expédition du produit
jusqu’à sa réception acceptée. Veuillez joindre une preuve d’achat, une description détaillée des
5-14-2015
défauts ainsi qu’une liste de tous les éléments distincts envoyés. Nous avons de plus besoin d’une
adresse complète, d’un numéro de téléphone (pour demander des renseignements) et d’une adresse
de courriel.
Garantie et réparations
Les demandes en garantie seront uniquement traitées en présence d’une preuve d’achat originale
émanant d’un revendeur spécialisé agréé, sur laquelle figurent le nom de l’acheteur ainsi que la date
d’achat. Si le cas de garantie est confirmé, le produit sera réparé Cette décision relève uniquement de
Horizon Hobby.
Réparations payantes
En cas de réparation payante, nous établissons un devis que nous transmettons à votre revendeur. La
réparation sera seulement effectuée après que nous ayons reçu la confirmation du revendeur. Le prix
de la réparation devra être acquitté au revendeur. Pour les réparations payantes, nous facturons au
minimum 30 minutes de travail en atelier ainsi que les frais de réexpédition. En l’absence d’un accord
pour la réparation dans un délai de 90 jours, nous nous réservons la possibilité de détruire le produit
ou de l’utiliser autrement.
Attention : Nous n’effectuons de réparations payantes que pour les composants
électroniques et les moteurs. Les réparations touchant à la mécanique, en particulier
celles des hélicoptères et des voitures radiocommandées, sont extrêmement coûteuses
et doivent par conséquent être effectuées par l’acheteur lui-même.
COORDONNÉES DE GARANTIE ET RÉPARATIONS
Pays d’achat Horizon Hobby Coordonnées Adresse
France Horizon Hobby
SAS
[phone]
infofrance@
horizonhobby.com
11 Rue Georges Charpak
77127 Lieusaint
Déclaration de conformité de
l’Union européenne : Horizon Hobby,
LLC déclare par la présente que ce
produit est en conformité avec les exigences
essentielles et les autres dispositions de la
directive EMC.
Une copie de la déclaration de conformité euro-
péenne est disponible à :
http://www.horizonhobby.com/content/support-
render-compliance.
Elimination dans l’Union
européenne
Ce produit ne doit pas être éliminé avec
les ordures ménagères. Il est de la responsabilité
de l‘utilisateur de remettre le produit à un point
de collecte officiel des déchets d’équipements
électriques. Cette procédure permet de garan-
tir le respect de l’environnement et l’absence
de sollicitation excessive des ressources na-
turelles. Elle protège de plus le bien-être de la
communauté humaine. Pour plus d’informations
quant aux lieux d’éliminations des déchets
d‘équipements électriques, vous pouvez con-
tacter votre mairie ou le service local de traite-
ment des ordures ménagères.
53493

AVVISO
Tutte le istruzioni, le garanzie e gli altri documenti pertinenti sono soggetti a cambiamenti a totale
discrezione di Horizon Hobby, LLC. Per una documentazione aggiornata sul prodotto, visitare il sito
horizonhobby.com e fare clic sulla sezione Support del prodotto.
Terminologia
Nella documentazione relativa al prodotto vengono utilizzati i seguenti termini per indicare i vari
livelli di pericolo potenziale durante l’uso del prodotto:
AVVISO: indica procedure che, se non debitamente seguite, possono determinare il rischio di danni
alle cose E il rischio minimo o nullo di lesioni alle persone.
ATTENZIONE: indica procedure che, se non debitamente seguite, determinano il rischio di danni
alle cose E di gravi lesioni alle persone.
AVVERTENZA: indica procedure che, se non debitamente seguite, determinano il rischio di danni
alle cose, danni collaterali e gravi lesioni alle persone O il rischio elevato di lesioni superficiali alle
persone.
AVVERTENZA: leggere TUTTO il manuale di istruzioni e familiarizzare con le caratteris-
tiche del prodotto prima di farlo funzionare. Un uso improprio del prodotto può causare
danni al prodotto stesso e alle altre cose e gravi lesioni alle persone.
Questo è un prodotto sofisticato per appassionati. Deve essere azionato in maniera attenta e
responsabile e richiede alcune conoscenze basilari di meccanica. L’uso improprio o irresponsabile
di questo prodotto può causare lesioni alle persone e danni al prodotto stesso o alle altre cose.
Questo prodotto non deve essere utilizzato dai bambini senza la diretta supervisione di un adulto.
Non usare componenti non compatibili o alterare il prodotto in nessuna maniera al di fuori delle
istruzioni fornite da Horizon Hobby LLC. Questo manuale contiene le istruzioni per la sicurezza,
l’uso e la manutenzione del prodotto. È fondamentale leggere e seguire tutte le istruzioni e le
avvertenze del manuale prima di montare, impostare o utilizzare il prodotto, alfine di utilizzarlo
correttamente e di evitare di causare danni alle cose o gravi lesioni alle persone.
Almeno 14 anni. Non è un giocattolo.
AVVISO: questo prodotto è inteso per un uso su veicoli o aerei senza pilota, radiocomandati e di
livello hobbistico. La Horizon Hobby declina ogni responsabilità al di fuori di queste specifiche e di
conseguenza non fornirà alcuna garanzia in merito.
REGISTRAZIONE DELLA GARANZIA
Visitate www.spektrumrc.com/registration oggi stesso per registrare il vostro prodotto.
IT
5-22V GND VID OSD
MINI FPV CAM
UP
DOWN
MENU
LEFT RIGHT
5-22V GND VID OSD
MINI FPV CAM
5-22V GND VID OSD
MINI FPV CAM
UP
DOWN
MENU
LEFT RIGHT
5-22V GND VID OSD
MINI FPV CAM
Retro fotocamera
Retro interruttori
OSD
3 PIN al
trasmettitore video
Interruttori OSD
visti di fronte
Si può controllare la funzione OSD inclusa nella fotocamera, dalla scheda degli interruttori, che,
essendo piuttosto piccola, si può installare sull’aereo insieme alla fotocamera.
1. Installare la fotocamera sulla parte anteriore dell’aereo usando il suo supporto (fornito) in
modo da avere una visione chiara.
2. Collegare la fotocamera alla scheda interruttori per l’OSD usando il cavetto a 4 pin.
3. Collegare il cavetto a 3 pin dal trasmettitore video al retro della scheda interruttori per l’OSD.
4. Accendere il sistema.
Per collegare la fotocamera direttamente al trasmettitore video, connettere alla fotocamera il cavetto
a 3 pin proveniente dal trasmettitore video, lasciando libero il pin per l’OSD.
MENU: per andare al menu principale, premere MENU (tasto centrale).
UP/DOWN: i tasti UP/DOWN permettono di muoversi attraverso il menu.
LEFT/RIGHT: i tasti LEFT/RIGHT modificano i parametri del menu.
Questa funzione permette di regolare la luminosità dello
schermo.
1. MANUAL: per l’uso con un diaframma dell’obiettivo
manuale
2. DC: per l’uso con un diaframma auto
3. VIDEO: per l’uso con un diaframma video auto
1. ATW Controllo automatico del bilanciamento del bianco-
Ideale per temperature di colore da 1800ºK~10500ºK
(luce fluorescente, esterni, lampade a vapori di sodio,
ecc)
2. MANUAL- Selezionare ATW e passare in modalità
Manuale
• Rosso 0~255
• Blu 0~255
Al termine selezionare RETURN
• Modalità automatica
• Modalità colore
• B/W MODE (modalità bianco/nero)
• EXTERNAL SWITCH (interruttore esterno)
1. COLOR TO B/W- Quando si è in External Color questo
non si può regolare.
2. B/W TO COLOR- Quando si è in External Color questo
non si può regolare.
3. DELAY TIME- Ritardo prima che lo stato del colore inizi a
variare
• ENGLISH
• CHINESE
Salva tutte le impostazioni ed esce dal menu principale.
Imposta il punto di nero e il punto di bianco
1. BLC- Utilizzare quando c’è un forte controluce dietro
all’oggetto.
2. HLC- Regolare il livello tra 0~255
• Notte
• Giorno
1. SHUTTER- Condizione e controllo della velocità
• Auto: la velocità dell’otturatore viene controllata
automaticamente dalla luminosità della scena
• FIXED: seleziona la velocità dell’otturatore da 1/50 a
1/100000
• FLK: selezionare quando si verifica uno sfarfal-
lio causato da uno squilibrio tra illuminazione e
frequenza.
2. BRIGHTNESS- regola la luminosità tra 0-255
3. AGC- a seconda della luminosità ambientale selezionare
HIGH, MID, LOW o OFF.
4. DWDR- a seconda della luminosità ambientale selezion-
are OFF o ON (Regola la luminosità da 0-63)
1. TITLE BACKGROUND- Impostazione dello sfondo
2. NOITOM- Rileva il movimento
• AREA: Rileva il movimento
• ENTER: Selezionando ENTER si cambia il colore
dell’area selezionata
Ripetere per scegliere altre aree. Dopo 1 secondo di in-
attività, si sposterà alla voce successiva.
3. PRIVACY- OFF/ON.
• AREA SEL: Imposta 4 aree riservate
• AREA STATE: Selezionare AREA STATE ON per
nascondere l’AREA selezionata. OFF per disabilitare
la Privacy
• LEFT/RIGHT/TOP/BOTTOM: Seleziona con il cursore le
dimensioni di ciascuna area riservata.
• COLOR: Seleziona il colore di ciascuna area riservata.
• RETURN: Ritorna la menu precedente
4. PARK LINE- OFF/ON
5. ADJ IMAGE (REGOLA L’IMMAGINE)-
• LENS SHARP (NITIDEZZA LENTE): OFF/ON: 0~255
• 2DNR: OFF/ON
• MIRROR (SPECCHIO): Interruttore
• FONT COLOR (COLORE DEI CARATTERI): 0~51
• CONTRAST (CONTRASTO): 0~255
• SHARPNESS (NITIDEZZA): 0~255
• DISPLAY CRT/LCD
• NEG IMAGE: OFF/ON
6. COMM ADJ
• CAM ID: Imposta ID fotocamera tra 0~255
• BAUD RATE: Imposta la velocità di comunicazione
della fotocamera tra 2400~38400
• PROTOCOL (PROTOCOLLO)
• DISPLAY ID: OFF/ON
• ID POSITION
COLLEGAMENTO INTERRUTTORI CAMERA-OSD
COLLEGAMENTO FOTOCAMERA-TRASMETTITORE VIDEO
MENU OSD
LENS
WHITE BALANCE (BILANCIAMENTO DEL BIANCO)
DAY & NIGHT
LANGUAGE (LINGUA)
EXIT
DPC
BACKLIGHT (CONTROLUCE)
EXPOSURE
SPECIAL
5-22V GND VID OSD
MINI FPV CAM
UP
DOWN
MENU
LEFT RIGHT
5-22V GND VID OSD
MINI FPV CAM
ATTENZIONE: se si usa un ESC con la frenata attiva, si raccomanda di alimentare il sistema
della fotocamera attraverso un BEC o un regolatore di tensione.
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
1. FACTORY- Riporta la fotocamera alle impostazioni iniziali
2. RETURN
RESET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 050
AGC ----
DWDR OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
IMAGE ADJ.
LENS SHAD. ON
2DNR ON
MIRROR OFF
FONT COLOR
CONTRAST 160
SHARPNESS 024
DISPLAY CRT
NEG. IMAGE OFF
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SETUP
LENS MANUAL
EXPOSURE
WHITE BALANCE ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
COMM ADJ.
CAM ID 001
BAUD RATE 4800
PROTOCOL PELCO-D
DISPLAY ID OFF
ID POS
RETURN RET
Periodo di garanzia
La garanzia esclusiva - Horizon Hobby, LLC, (Horizon) garantisce che i prodotti acquistati (il “Prodotto”)
sono privi di difetti relativi ai materiali e di eventuali errori di montaggio. Il periodo di garanzia è
conforme alle disposizioni legali del paese nel quale il prodotto è stato acquistato. Tale periodo di
garanzia ammonta a 6 mesi e si estende ad altri 18 mesi dopo tale termine.
Limiti della garanzia
(a) La garanzia è limitata all’acquirente originale (Acquirente) e non è cedibile a terzi. L’acquirenteha
il diritto a far riparare o a far sostituire la merce durante il periodo di questa garanzia.La garanzia
copre solo quei prodotti acquistati presso un rivenditore autorizzato Horizon. Altre transazioni di terze
parti non sono coperte da questa garanzia. La prova di acquisto è necessaria per far valere il diritto di
garanzia. Inoltre, Horizon si riserva il diritto di cambiare o modificare i termini di questa garanzia senza
alcun preavviso e di escludere tutte le altregaranzie già esistenti.
(b) Horizon non si assume alcuna garanzia per la disponibilità del prodotto, per l’adeguatezza o
l’idoneità del prodotto a particolari previsti dall’utente. È sola responsabilità dell’acquirente il fatto di
verificare se il prodotto è adatto agli scopi da lui previsti.
(c) Richiesta dell’acquirente – spetta soltanto a Horizon, a propria discrezione riparare o sostituire
qualsiasi prodotto considerato difettoso e che rientra nei termini di garanzia. Queste sono le uniche
rivalse a cui l’acquirente si può appellare, se un prodotto è difettoso. Horizon si riserva il diritto di
controllare qualsiasi componente utilizzato che viene coinvolto nella rivalsadi garanzia. Le decisioni
relative alla sostituzione o alla riparazione avvengono solo in base alla discrezione di Horizon.
Questa garanzia non copre dei danni superficiali o danni per cause di forza maggiore, uso errato del
prodotto, negligenza, uso ai fini commerciali, o una qualsiasi modifica a qualsiasi parte del prodotto.
Questa garanzia non copre danni dovuti ad una installazione errata, ad un funzionamento errato, ad
una manutenzione o un tentativo di riparazione non idonei a cura di soggetti diversi da Horizon. La
restituzione del prodotto a cura dell’acquirente, o da un suo rappresentante, deve essere approvata per
iscritto dalla Horizon.
Limiti di danno
Horizon non si riterrà responsabile per danni speciali, diretti, indiretti o consequenziali; perdita di
profitto o di produzione; perdita commerciale connessa al prodotto, indipendentemente dal fatto che
la richiesta si basa su un contratto o sulla garanzia. Inoltre la responsabilità di Horizon non supera
mai in nessun caso il prezzo di acquisto del prodotto per il quale si chiede la responsabilità. Horizon
non ha alcun controllo sul montaggio, sull’utilizzo o sulla manutenzione del prodotto o di combinazioni
di vari prodotti. Quindi Horizon non accetta nessuna responsabilità per danni o lesioni derivanti da
tali circostanze. Con l’utilizzo e il montaggio del prodotto l’utente acconsente a tutte le condizioni,
limitazioni e riserve di garanzia citate in questa sede. Qualora l’utente non fosse pronto ad assumersi
tale responsabilità associata all’uso del prodotto, si suggerisce di restituire il prodotto intatto, mai usato
e immediatamente presso il venditore.
Indicazioni di sicurezza
Questo è un prodotto sofisticato di hobbistica e non è un giocattolo. Esso deve essere manipolato con
cautela, con giudizio e richiede delle conoscenze basilari di meccanica e delle facoltà mentali di base.
Se il prodotto non verrà manipolato in maniera sicura e responsabile potrebbero risultare delle lesioni,
dei gravi danni a persone, al prodotto o all’ambiente circostante. Questo prodotto non è concepito per
essere usato dai bambini senza una diretta supervisione di un adulto. Il manuale del prodotto contiene
le istruzioni di sicurezza, di funzionamento e di manutenzione del prodotto stesso. È fondamentale
leggere e seguire tutte le istruzioni e le avvertenze nel manuale prima di mettere in funzione il prodotto.
Solo così si eviterà un utilizzo errato e di preverranno incidenti, lesioni o danni.
Domande, assistenza e riparazioni
Il vostro negozio locale e/o luogo di acquisto non possono fornire garanzie di assistenza o riparazione
senza previo colloquio con Horizon. Questo vale anche per le riparazioni in garanzia. Quindi in tale casi
bisogna interpellare un rivenditore, che si metterà in contatto subito con Horizon per prendere una
decisione che vi possa aiutare nel più breve tempo possibile.
Manutenzione e riparazione
Se il prodotto deve essere ispezionato o riparato, si prega di rivolgersi ad un rivenditore specializzato
o direttamente ad Horizon. Il prodotto deve essere Imballato con cura. Bisogna far notare che i
box originali solitamente non sono adatti per effettuare una spedizione senza subire alcun danno.
Bisogna effettuare una spedizione via corriere che fornisce una tracciabilità e un’assicurazione, in
quanto Horizon non si assume alcuna responsabilità in relazione alla spedizione del prodotto. Inserire
il prodotto in una busta assieme ad una descrizione dettagliata dei problemi e ad una lista di tutti i
singoli componenti spediti. Inoltre abbiamo bisogno di un indirizzo completo, di un numero di telefono
per rivolgere ulteriori domande e di un indirizzo e-mail.
5-14-2015
Garanzia a riparazione
Le richieste in garanzia verranno elaborate solo se è presente una prova d’acquisto in originale
proveniente da un rivenditore specializzato autorizzato, nella quale è ben visibile la data di acquisto.
Se la garanzia viene confermata, allora il prodotto verrà riparato o sostituito. Questa decisione spetta
esclusivamente a Horizon Hobby.
Riparazioni a pagamento
Se bisogna effettuare una riparazione a pagamento, effettueremo un preventivo che verrà inoltrato al
vostro rivenditore. La riparazione verrà effettuata dopo l’autorizzazione da parte del vostro rivenditore.
La somma per la riparazione dovrà essere pagata al vostro rivenditore. Le riparazioni a pagamento
avranno un costo minimo di 30 minuti di lavoro e in fattura includeranno le spese di restituzione.
Qualsiasi riparazione non pagata e non richiesta entro 90 giorni verrà considerata abbandonata e verrà
gestita di conseguenza.
ATTENZIONE: Le riparazioni a pagamento sono disponibili solo sull’elettronica e sui
motori. Le riparazioni a livello meccanico, soprattutto per gli elicotteri e le vetture RC
sono molto costose e devono essere effettuate autonomamente dall’acquirente.
GARANZIA E ASSISTENZA - INFORMAZIONI PER I CONTATTI
Stato di acquisto Horizon Hobby Informazioni per i
contatti Indirizzo
Germania
Horizon Technischer
Service
[phone]
100
service@
horizonhobby.de
Christian-Junge-
Straße 1
25337 Elmshorn,
Germania
Horizon Hobby GmbH
Dichiarazione di Conformità EU:
Horizon Hobby, LLC con la presente
dichiara che il prodotto è conforme
ai requisiti essenziali e ad altre disposizioni
rilevanti della direttiva EMC.
Una copia della dichiarazione di conformità per
l’Unione Europea è disponibile a:
http://www.horizonhobby.com/content/support-
render-compliance.
Smaltimento all’interno
dell’Unione Europea
Questo prodotto non deve essere
smaltito assieme ai rifiuti domestici. Invece è
responsabilità dell’utente lo smaltimento di tali
rifiuti, che devono essere portati in un centro
di raccolta designato per il riciclaggio di rifiuti
elettronici. Con tale procedimento si aiuterà
preservare l’ambiente e le risorse non verranno
sprecate. In questo modo si proteggerà il ben-
essere dell’umanità. Per maggiori informazioni
sui punti di riciclaggio si prega di contattare il
proprio ufficio locale o il servizio di smaltimento
rifiuti.
© 2016 Horizon Hobby, LLC. The Spektrum trademark is used with permission of Bachmann
Industries, Inc.
All other trademarks, service marks and logos are property of their respective owners.
Created 05/16
Cablaggio 4 PIN
• Ingresso 5-22V DC
(rosso)
• Filo di massa (nero)
• Ingresso video (giallo)
• OSD (verde)
53493