5
DISHWASHER
Installation
Coldwaterconnection.
Connect the cold water supply
hose, inserting the small filter
suppliedwiththedishwasherand
makingsurethatitisfastenedtightly
inplace(seefigure2).Ifthewater
hosesareneworhavebeenoutof
useforanextendedperiodoftime,
letthewaterruntomakesureitis
clearandfreeofimpuritiesbefore
making the connection. If this
precautionisnottaken,thewater
inlet could get blocked, causing
damagetoyourdishwasher.
Choosewhereyouwanttoinstall
yourdishwasher,youcanplaceit
sothatitssidesorbackpanelare
side by side with furniture or up
againstthewall.Thedishwasheris
providedwithwatersupplyanddrain
hoses, which can be directed
towardstheleftorrighttofacilitate
appropriateinstallation.
Levelling.
Oncetheapplianceispositioned,
adjustthefeetbyscrewingthemin
oroutdependingonhowhighyou
want it and to level it so that it is
horizontal.Makesurethatitisnot
inclinedmorethan2degrees.Ifthe
applianceislevel,itwill helpensure
itscorrectoperation.
HeightAdjustment
Inserttheapplianceintothecutout
andthenadjusttheheightusingthe
screwslocatedonthefrontbottom
part of the machine. Use a
screwdriverto turn the screws in
the clockwise or anti-clockwise
directiontoincreaseordecrease
theheightrespectively.
Drainhoseconnection.
WARNING: Connect your
dishwasher drain hose to pipes
which connect to the foul drain
system and not to surface water
drains.
IMPORTANT: For the correct
operationofyourdishwasher,itis
essentialtocomplywiththefollowing
information:-
Standpipe:
Ensurethatthehoseisnotpushed
toofardownthestandpipe.
Iftheendofyourdrainhoseisfitted
with‘retainingflaps’,ensuretheyare
insertedfullyintothestandpipe. This
willpreventthepipefromjumping
outduringinstallationanduse.
DO NOT position the standpipe
nearanelectricaloutlet.
ENSUREthatthedrainhoseisnot
kinkedanditisroutedasshownin
thediagram.
Thestandpipeshouldhaveabore
ofatleast38mm(11/2”).Itshould
beinstalledasshown,haveatrap
fittedandmustdischargeintothe
same drain system as your
householdsink.
It MUST NOT be connected to a
surfacewaterdrain.
SinkWasteSystem:
Forundersinkdrainage:
Beforeconnectingthedrainhose,
removeanyinternalrestrictions-
Thiswillpreventabuildupofdebris
whichcouldcauseablockage.
Removeanyrestrictionsfromthe
wastespigotand ensurethatthe
sealingbungisremoved.Thehose
should be routed, such that it is
raised to a minimum height of
800mm(31/2”).
NOTE:Ensurethesinkoutlet
pipehasaminimumdiamtereof
32mm.
1.UntietheendoftheGREY
drainagehosefromtherearof
theappliance.
2.Repositionthe‘HookedEnd
Support’asrequiredalongthe
GREYdrainagehose.
3.Iffittinganundersinkwaste
disposalunit,cutoutthe
membrane,bungorblanking
plug.
4.AttachtheGREYdrainage
hosetotheundersinkwaste
disposalunitsecurely,usingthe
clipandrubbertubesupplied.
Ensurethedrainhoseis
securelyattached,toprevent
itcoming away whilethe
machineis inuseandcausing
aflood.
A
Fig.2