7
DISHWASHER
First of all.
- Turn on the water supply
tap completely.
- Add the correct amount
of detergent.
- Load the baskets cor-
rectly.
- Check that the spray
arms rotate freely.
- Close the door securely.
-
Press the ON-OFF button "A":
indicatorlight"B"comeson.The
displayturnsonand3dashesap-
pear,theseindicatethatthedish-
washer is now awaiting instruc-
tions.
Select the wash cycle.
Turnknob"M"untilthereference
notchontheknobcorrespondswith
thenumberorsymbolforthecycle
you wish to set (see programme
chart). PresstheStartbutton"R"
andthewashcyclestartsup, the
approximateamountoftimeleftuntil
the end of the wash cycle is
displayed.Afterafewseconds,you
will hear a short beep: the wash
cyclehasbegunandindicator"G"
displaysthesymbolcorresponding
to the cycle starting phase.The
counter "L" will indicate the
estimatedamountoftimeleftuntil
theendofthewashcycle
Indicator lights.
Yourdishwasherisprovidedwith
anindicatorlight "G"with4sym-
bolswhichcome onastheappli-
ancecarriesouteachphaseofthe
selectedprogramme.
These indicator lights represent
eachphasecorrespondingto:
Modifying a wash cycle in
progress.
Butifyouhavechosenthewrong
cycle,nottoworry!Youcanmodify
thewashcycleinprogressonlyifit
hasonlyjuststarted.
KeeptheResetbutton"R"pressed
forabout3seconds:
a prolonged beep will sound,
followedbythreeshortbeeps.The
cancelledcycletime will flash on
thedisplay.Turntheknobtoselect
anewwashcycle.
You've left out a dish?
Interruptthewashcyclebypress-
ingtheON-OFFbutton,openthe
door and insert the dish you had
forgotten,closethedoorandpress
theON-OFFbuttonagain.
Thecyclewillstartupfromwhere
youinterruptedit.
Cycle end
The end of the wash cycle is
indicatedbytwoshortbeepsand
the word "END" flashes on the
display.
Turnoffthewatertap.
Waitafewminutesbeforeunload-
ingthedishes:theyareveryhot!If
youwaitalittlewhile,theydrybetter
due tothesteam.
Make sure the wash cycle has
endedbeforeremovingthedishes!
Emptythelowerbasketfirst.
There's been a power
failure or you opened the
dishwasher door
The wash cycle stops and then
restartswhentheelectricitycomes
backonorwhenyouclosethedoor.
How to use your Dishwasher
How to programme
“extra” drying
If you want your dishes to be
perfectlydry,followtheinstructions
below.
Pressbutton"H".Afteraprolonged
beep, indicator light "Z" lights up
andthetimecorrespondingtothe
washcycleselectedon theknob
willflashonthedisplay.
Todisabletheextradryingoption,
pressthesamebuttonandindicator
light "Z" will be turned off after a
beepissounded.
Thisoptionisincompatiblewiththe
soak cycle. Remember that with
extra drying, the wash cycle will
lastlonger,toprovideyouwithdrier
dishes.
You decide
when it starts.
Whenyouhaveloadedthedishes,
youcanchoosewhentostartyour
dishwasherbeforesettingthewash
cycledesired.
Press button "I" repeatedly to
postponethestartofthewashcycle
from01hourto 24h.
Ifyoupressthebuttonagain,the
word "OFF" is displayed (no
selectionmade).
Once you have made your
selection,makesuretheappliance
doorisshutandstartthewashcycle
bypressingtheSTARTbutton.
Symbol"U"lightsuponthedisplay
andthecountdownbegins.
Oncethecountdownisup,thewash
cyclebeginsandtheapproximate
amountoftimeleftuntiltheendof
the wash cycle is displayed. A
quicklookattheindicatorlightswill
keepyouinformedofthecountdown
progressatalltimes.
Have you changed your
mind?
Ifyouchangeyourmind,youcan
set a shorter time delay: press
button"I"toselectit.Youneednot
resetthewashcycle.
Ifyouhavechangedyourmindand
wish to start the wash cycle
immediately,pressbutton"I"until
the countdown is fully reset.
Indicatorlight"U"willturnoffand
thecyclewillstartatthesoundofa
beep.
Theindicator lightcorresponding
tothecyclephaseunderway will
come up on the display and the
countdowntotheestimatedcycle
endbegins.
Half load.
Yourdishwasheralsoallowsyou
towashhalfaloadWhenyouonly
havelittlecutlerytowash,youcan
run just half a load on the upper
rack, saving on both water and
electricity.
Press button "N"; you will hear a
beep and the symbol ‘V’
correspondingtothehalfloadwill
lightup.
Onceyouhavemadeyoursetting,
start the wash cycle by pressing
theSTARTbutton.
- This option is available with all
washcycles..Pressitoncemore
toresettherackselectionandthe
dishwasherwillconsequentlywash
onbothracks.
pre-wash,wash,rinses,drying.
Atalltimes yourdishwashertells
youwhatphaseitisat.
Turn the appliance off by
pressingbutton“A”,unplugthe
appliancefromthe electricity
socket to cut off the power
supply;thepowersupplycable
shouldconsequentlybeeasily
accessible.
Warning!