12
First of all.
-Pluginandswitchon.
- Turn on the water supply tap
completely.
- Add the correct amount of
detergent.
-Loadthebasketscorrectly.
-Checkthatthesprayarmsrotate
freely.
-Closethedoorsecurely.
-PresstheStand-bybutton"A".The
display turns on and 4 dashes
appear, these indicate that the
dishwasher is now awaiting
instructions.
Select the wash cycle.
Selectthewashcycleby
pressingbutton "P".Eachtime
youpressthebutton,abeepwill
soundandthecorresponding
symbolswilllightupinsequence.
Selectthewashcyclemost
suitableforthetypeofdishesto
wash(see‘Programme Chart’).
PressandholdtheStartbutton"D"
forafewsecondsandthewash
cyclebegins. Ifyouleftthedoor
open, the word ‘DOOR’ will be
displayed-shutthedoorandpress
theStartbuttonagain.
Abeepsounds:thewashcyclehas
started and only the symbol
correspondingtotheselectedwash
cycleisdisplayed.
Youcanseetheamountoftimeleft
untiltheendofthewashcycleon
thecounter"L".
- Do not expect a precise
countdown
as the wash cycle
startswithanestimatedcycletime
and the sensor automatically
updates this as the cycle
progresses(timewouldbeaffected
bysuchthingsaswatertemperature
anddegreeofsoiling).
Indicator lights.
Cyclephaseindicatorlights "M"
keepyouinformed.Eachwilllight
uptoshowyouwhichcycle
phaseisinprogress:Pre-Wash,
Wash,RinseorDrying.
Modifying a wash cycle in
progress.
Ifyouhavechosenthewrongcycle
-Youcanmodifythewashcycle,if
ithasonlyjuststarted.Keepthe
Resetbutton "D" pressedinfor a
fewseconds,aprolongedbeepwill
sound,followedby3shortbeeps.
Thewashcyclesymbolwillgoout
and4dashesappeartoshowthat
allsettingshavebeencancelled.
Youarenowabletoreselectthe
correctwashcyclethatyourequire.
You've left out a dish?
Interruptthewashcycleby
pressingtheStand-bybutton"A".
Openthedoorandinsertthedish
youhadforgotten,closethedoor
and pressthesamebuttonagain.
Thecyclewillstartupfromwhere
youinterruptedit.
Cycle end
Theendofthewashcycleis
indicatedby2shortbeepsand
theword‘END’flashes uponthe
display.
Turnoffthewatertap.
Waitafewminutesbeforeunloading
thedishes:theyareveryhot!Ifyou
waitalittlewhile,theydrybetter
due tothesteam.
Emptythelowerbasketfirst.
Ensurethewashcyclehasended
beforeattemptingtoremoveany
dishes.
How to use your Dishwasher
Delaying the start of a
programme.
Whenyouhaveloadedthedishes,
youcanchoosewhentostartyour
dishwasherbeforesettingthewash
cycledesired.
Press button"M" (Mode)andthen
selectthesymbolcorrespondingto
theDelayedStart
Therectanglealongsidewilldarken
toshowselection.Nowpressbutton
“S”toselectthedelayedstartby1
to24hours.Ifyoupressthisbutton
again,theword‘OFF’isdisplayed
(noselectionmade).
Eachtimethebuttonispressed,a
beepwillsound-Onceyouhave
madeyourselectionmakesurethe
doorisshutandpresstheStart
button"D".
The countdown to the start is
displayed. When this time
elapses, the wash cycle
begins and the time left will
come up in the display.
Have you changed your
mind?
Ifyoudecideyourequireadifferent
delaystartperiod,pressthe"M"
(Mode) and“S”(Select)buttonsand
makeadifferentselection.
Ifyouwanttocancelthedelaystart
andstarttheselectedwashcycle
immediately,pressthe“S”(Select)
buttonrepeatedlyuntilitissetto
zero.The indicatorwillturnoff.
The delayed start is also reset
automatically,shouldyoufailto
select a wash cycle within 15
seconds.
Half load.
Thisoptionisavailablewithallwash
cycles.
Yourdishwasheralsoallowsyouto
washhalfaload(usingonebasket),
tosavewater,electricityanddeter-
gent(useonlyhalftheamount).
Press button "M" (Mode)
repeatedly until symbol "N" is
selected, the corresponding
rectanglewilllightup.
Usingbutton“S”(Select)youcan
decidetowashahalf-loadoneither:
Theupperbasket or
thelowerbasket
Eachtimeyoupressthebuttonyou
will hear a beep and the
correspondingsymbolwilllightup.
Whennosymbolislititmeansno
selectionhasbeenmade.
Onceyouhavemadetheselection,
pressStarttobeginthewashcycle.
“Extra” drying
If you want your dishes to be
perfectlydry:
pressthebutton“S”toselectthe
extra-dry,selectthebasket/stobe
usedanddelayedstartifrequired.
Indicator “G” will show
symbol
whenithasreachedthe
drying phase.Thesymbolwillflash
forapproximately4secondsand
the word OFF appears on the
display(extradryingdisabled).
Ifyouimmediatelypressbutton“D”
Start,youwillhearaprolongedbeep
andthewordONwillappearonthe
displayandextradryinghasbeen
selected.
Onceyouhavecompletedallyour
selections,shutthedoor.Youwill
hearabeepandthewashcyclewill
start,eitherimmediatelyorafterthe
delayedstartifselected.
Rememberthatwithextradrying
selectedtheprogrammewilllast
longer.
There'sbeenapowerfailureor
youopenedthedishwasherdoor
Thewashcyclestopsandthen
restartswhentheelectricity
comesbackonorwhenyouclose
thedoor.
Foryourownsafety,ensurethedooris
closedwhenthedishwasherisnotin
use.
Duo-Wash cycle
Thisisaspecialcyclethatrunsa
differentwashonthetwobasket
positions.
- Upperbasket:delicate,for
glasswareandglasses.
--Lowerbasket:heavyduty,for
saucepansandfryingpans.
Pressbutton"M" (Mode)andthen
selectthesymbolcorrespondingto
Duo-Washand pressbutton"S"
(Select)‘on’meansitisselectedand
therectanglealongsideitwilllightup,
whereas‘off’meansitisdisabled.
Afterapproximately5secondsyou
willautomaticallyquitthemenu.
NowpressStartandthewashcycle
startisindicatedbyabeep.
Have you left the
dishwasher door open?
Theword‘DOOR’willflashupon
thedisplay.Shutthedishwasher
doorandtheselectedwashcycle
willstart.
Warning:
Turnthedisplayoffbypressing
theStand-bybutton"A".unplug
theappliancefromtheelectricity
sockettocutoffthepowersupply;
thepowersupplycableshould
consequently be easily
accessible.