Hotpoint HTWP1400FWW User instructions

HTWP1400F– Hotpoint ® 3.5 DOE cu. ft. capacity washer
Specification Created 2/13
460157
Washer Dimensions (in inches)
36
25-1/2
42
51
Side View
27
Rear View
36 42
27
23-1/2
2-1/2
25-1/2*
Side View Rear View
8-1/2
25-3/4
23-1/2
11-1/2
*24-1/2" from the edge of the side panel to the front.
25-1/2" from front to edge of endcaps.
Washer/Dryers SC QSart
Circuit Requirements: An individual, properly-grounded branch circuit,
with a three-prong grounding-type receptacle, protected by a 15 or
20 amp circuit breaker or a time-delay fuse, is required.
Electrical Rating: 115V, 60Hz, 10 Amps
Installation Information: Before installing, consult installation
instructions packed with product for current dimensional data.
Washer Note: Washer wall outlet must be located within 36" of
service cord entry. Wall outlet must not be located behind dryer.
Listed by
Underwriters
Laboratories

HTWP1400FWW
Features and Benefits
• Plastic ribbed basket - Removes more moisture than smooth baskets
• Auto balance suspension system - Handles the heaviest loads without banging or walking
• Dual-Action Agitator - Provides gentle, dual-wash action
• Power Rinse option - Optional deep-rinse cycle ensures clothes are rinsed of soap residue
and fabric softener
• 4 water levels - Select water level based on load size
• 8 wash cycles - Handle various fabrics and soils
• 3 wash/rinse temperatures - A variety of temperatures provide great wash results
• Model HTWP1400FWW – White
HTWP1400F– Hotpoint ® 3.7 DOE cu. ft. capacity washer
Specification Created 2/13
460157