HOUZZ Monroe Series User manual

Monroe 30” Bathroom Vanity
Part Number: Monroe-30G/W/NB
Finish: Gray/White/Navy Blue
Top: Marble
Thank you for your vanity purchase! This vanity has been constructed with design, quality and
functionality in mind. We hope you enjoy this new addition!
Before beginning assembly, we encourage you to familiarize yourself with your new furniture
piece by taking a few minutes to go through this booklet. It contains important information on
installation and care tips to keep your furniture looking as good as new.
NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE

Monroe 30” Bathroom Vanity
Part Number: Monroe-30G/W/NB
Finish: Gray/White/Navy Blue
Top: Marble
NOTES AND INSTALLATION
•Carefully read instructions before starting the installation.
•Ensure all parts and components are present before beginning assembly.
•Faucet, drain, silicone and all other plumbing components, tools & hardware are not
included.
•Handling will require two people.
•Estimated installation time is 30 minutes (excluding plumbing work).
•Ensure the vanity is installed on a level floor. Unevenness can cause the vanity to
become misaligned, resulting in twisting of the cabinet. Repair any uneven areas with
shims.
•Ensure all building & plumbing codes are respected. We highly recommend the use of a
licensed plumber to install the faucet and plumbing.
CARE, CLEANING AND MAINTENANCE
Dust regularly with a soft, lint-free cloth to prevent dirt build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage
finish. Excessive exposure to sunlight and extreme changes in temperature and moisture can
damage wood furniture.
The marble top is resilient, but care needs to be taken to preserve it's appearance. Do not place
hot appliances, such as curling irons and hot hair dryers directly on the counter top. Wipe spills
immediately. For tougher stains, use a non-abrasive Granite/Stone cleaner.
WARNING: Should this product become damaged, and/or components are broken or missing,
DO NOT USE.

Monroe 30” Bathroom Vanity
Part Number: Monroe-30G/W/NB
Finish: Gray/White/Navy Blue
Top: Marble
Part List
VANITY BACKSPLASH
Part A - 1 PC Part B - 1 PC
Dimensions
TOP VIEW BACK VIEW

Monroe 30” Bathroom Vanity
Part Number: Monroe-30G/W/NB
Finish: Gray/White/Navy Blue
Top: Marble
Step 1
•Place the vanity in the desire location.
•Ensure the vanity is level. Shim legs, if necessary.
•The drawers need to be removed for plumbing installation. Locate the clips on both sides
of the bottom of the drawer, press the clips and pull the drawer out
•Install the faucet and all plumbing.
•Reinsert the drawers by aligning the two sides of the drawer glides and slide it until fully
inserted.
•Ensure there are no water leaks.

Monroe 30” Bathroom Vanity
Part Number: Monroe-30G/W/NB
Finish: Gray/White/Navy Blue
Top: Marble
Step 2 (recommended)
•With the vanity in its location and all plumbing in place, apply a bead of silicone to the
bottom edge of the backsplash and secure it to the vanity.
•Wipe away any excess silicone immediately.
Note: Allow 24 hours for the silicone to fully dry before exposing it to water or cleaning products.
Ensure to apply the silicone to
the rough edge and that the
smooth face is facing the front