Hovamp MT-02 User manual

HOVAMP MT-02
OWNER’S MANUAL
AM/FM STEREO RADIO, CD, USB, BLUETOOTH
AND FULL SIZE STEREO PHONOGRAPH

1
CAUTION
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE
PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL
The exclamation point within an equilateral triangle is in-tended to alert the user
to the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
The lightning flash with arrow head symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within
the product’s enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS
1. Read, keep and follow all these instructions in this manual.
2. Clean only with dry cloth.
3. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
4. Do not install near any heat sources such as radiators, heat registers, stoves or other
apparatus (including amplifiers) that produce heat.
5. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and point where they exit from the apparatus.
6. Unplug this apparatus during lightning storms or when unused for long periods of time.
7. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
8. This appliance shall not be exposed to dripping or splashing water and no object filled with
liquids such as vases shall be placed on the apparatus.
9. Do not overload wall outlet.
10.Operate controls and buttons as described in the manual.
11. Store your CDs in a cool area to avoid damage from heat.
12.When moving the set, be sure to first disconnect the power cord.

2
PREPARATION FOR USE
Transit screw
Stylus cover
Tone arm
lock lever
• Carefully remove the unit from the display carton and remove all
packing material from the unit.
• Unwind the AC power cord and extend it to its full length.
• Unwind the FM Antenna wire and extend it to its full length.
• Place the unit on a stable, level surface, convenient to an AC outlet
out of a strong magnetic field.
• Raise the lid to expose the phonograph. The phonograph has been
secured for shipment with a transit screw. Use a coin or screwdriver
to turn the transit screw clockwise. This will allow the turntable to
“float”.
• Remove the opaque white plastic stylus cover from the phonograph
stylus by sliding it in the direction of the arrow.
• During this operation pay attention to the stylus, because the stylus
damage is not covered by guarantee.
• Remove the twist-tie that was used to secure the tone arm during
shipment.
• Release the tone arm lock lever.
• Connect the plug to your AC220 V 50 Hz outlet.
POWER SOURCE
This product is designed to operate on normal DC 12V 2A only. Attempting to operate this
system from any other power source may cause damage to the system, and such damage is not
covered by your warranty.

3
LOCATION OF CONTROLS AND INDICATORS
FRONT PANEL
1. Phonograph Lid
2. Turntable
3. Speakers
4. USB Socket
5. POWER Button
6. RECORD Button
7. FUNCTION Button
8. VOLUME Control
9. Tuner Backlight
10. LCD Display
11. Remote Control Sensor
12. POWER Indicator
13. FM ST./REC. Indicator
14. Tuning Pointer
15. BAND Button
16. RADIO Button
17. CD/USB Button
18. BT Button
19. PHONO Button
20. CD Drawer
21. Tuning Control
22. PLAY/PAUSE Button ( )
23. STOP Button ( )
24. DN/F.R Button ( )
25. UP/F.F Button ( )
26. PLAY.MODE Button ( )
27. OP/CL Button ( ) (CD Open/Close
Button)
28. REPEAT.
29. TRACK-10
30. TRACK+10
31. RANDOM
32. DELETE
33. PROGRAM
Note 1: All of the buttons on the remote control have the same function as these buttons in the
unit. This remote control just used for CD/MP3 and USB mode.
Note 2: Long pressing PLAY/PAUSE on Remote Control for 2 seconds will effect FUNCTION, to
change the playing mode between CD and USB.
Note 3: Long pressing DELETE on Remote Control for 2 seconds, Deleting will be effectived.

4
BACK PANEL
34.FM antenna
35.DC 12V 2A in jack
PHONOGRAPH
43. 45 rpm Adapter
44. Turntable
45. Transit Screw
46. Cue Lever
47. Speed Selector (33/45/78 rpm)
48. Tone Arm Lock.
49. Tone Arm with Stylus
50. Autostop Button
OPERATING INSTRUCTIONS
POWER ON
1. Press POWER to turn the system on. The power indicator lights up.
2. Press the function selector buttons (BAND/RADIO/CD USB/BT/PHONO) to select your
desired function.
3. Start to adjust the volume by using the VOLUME control.
4. When you have finished your listening, press POWER again to turn the system off. The
power indicator goes off
USB OPERATION
1. Press the CD/USB button first and the FUNCTION button second to
enter USB mode, the ‘ ’ and ‘USB’ icon will be shown.
2. Insert a USB device into the USB socket.
3. PLAY/PAUSE, DN/UP and stop functions are the same as CD
functions.
4. The USB input is compatible with the data flesh memory key, it is not guaranteed the
compatibility with proprietary software MP3 players.

5
NOTE:
1. You may press the FUNCTION button on panel or long press PLAY/PAUSE button on
Remote control for 2 seconds to change the playing mode between CD and USB.
2. USB memory can not greater than 16G, Otherwise it is possible can not be player.
PLAYING IN MP3 MODE (UNDER CD/USB OPERATION)
1. Press PLAY/PAUSE button ( ) to start or pause playback of the selected track in the CD/
USB mode.
2. While playing the song, the song number and folder number of your selected track will be
shown on the screen. MP3 icon and ‘ ’ icon will be shown.
3. You can stop the playback at any time by pressing the STOP button ( ).
TRACK SKIP AND HIGH SPEED TRACK SEARCH IN CD/USB MODE
During CD/USB playback, press UP/F.F ( ) or DN/F.R ( ) button on the Unit panel or on the
remote control repeatedly will skip to higher or lower tracks. Release the button when your
desired track number is shown. To rapidly search forward or backward within a track and locate a
specific passage of it, depress and hold UP/F.F ( ) or DN/F.R ( ) button.
The player will search forward or backward at a high speed. Release the button when you hear
your desired passage and the playback will resume normal from that point. To skip 10 tracks
BACKWARDS/AFTERWARDS, press TRACK+10 TRACK-10 button on remote control.
REPEAT/RANDOM FUNCTION IN MP3 MODE (UNDER CD/USB OPERATION)
Press the PLAY.MODE button on the panel or REPEAT button on the
Remote control will repeat the currently playing track and the ‘rep’ icon
will be shown on the track number display. Press this button for the
second time will repeat all tracks on the MP3 disc from the first track and
will be shown. Press this button for the third time to repeat all files in
the album. Press this button for the fourth time on panel will cancel both
the repeat and random playback function. Press this button for the fifth
time on panel will cancel random function. If press REPEAT button on Remote Control for the
fourth time, will cancel the repeat playback function; if press RANDOM button on Remote Control
for the first time, will begin to Random function, press RANDOM button secondly on Remote
Control, will cancel the random function. Press the STOP ( ) button to stop playing.
NOTE: There is no folder in the disc if no MP3 is detected.

6
USB RECORDING
1. CD RECORDING
Plug U DISK into USB Socket. Then press CD/USB button. Place CD into the CD drawer,
Play the track which will be recorded. Press RECORD button twice to start recording.
If whole CD will be played, recording will be effected for all the tracks.
Each audio track coincides with its MP3 file, stop recording manually.
NOTE: Recording will be failed if press STOP Button during the recording.
2. MP3 DISC RECORDING
Plug U DISK into USB Socket. Then press CD/USB button, place CD into the CD drawer,
Play the track which will be recorded. Press RECORD button twice to start recording.
If whole MP3 CD will be played, recording will be effected for all the tracks, stop recording
manually.
NOTE: Recording will be failed if press STOP button during recording.
3. PHONOGRAPH RECORDING
Plug U DISK into USB Socket. Then press PHONO button. Play the phono, and set the tone
arm to the right place. Press RECORD button twice to start recording. Press STOP button ( )
to stop recording when you finished recording.
4. BLUETOOTH RECORDING
Set the function to the BT mode. Plug USB flash drive into USB socket. Play the audio from
your Bluetooth device. Press RECORD button twice to start recording. Press STOP button to
stop recording when you have finished recording.
5. DELETE TRACKS FROM U DISK
Plug U DISK into USB socket. Then press CD/USB button to get into CD/USB mode. Press
the FUNCTION button on the panel or long press PLAY/PAUSE button on Remote control to
choose USB mode. During playing select the track, press for at least 2 seconds DELETE and
track will be deleted.
RADIO OPERATION
1. Press POWERtoturnthesystemonthetunerbacklightcomes‘on᾿.PresstheRADIO button
to enter the radio mode, Press BAND button to change between AM and FM.
2. Rotate the TUNING control to tune the desired radio station. If you tune to an FM stereo
station, the FM ST./REC. Indicator will light and reception will be in stereo.
3. When you have finished your listening, press POWER again to turn the system off. The
POWERindicatorandthetunerbacklightgo‘off᾿.
ANTENNA INFORMATION
The AM antenna is inside the cabinet. If AM reception is unsatisfactory try repositioning the
cabinet slightly until the internal antenna is picking up the strongest signal.
The FM wire antenna is located on the back cabinet. If necessary adjust the position and
direction of this antenna until you find the position that provides the best reception.

7
CD OPERATION
1. Press the CD/USB button to enter CD mode, the ‘ ’and,‘DISC᾿
icon will be shown on the screen. The unit can play CD, CD-R and
CD-RW.
2. Press the OP/CL button to open the CD drawer.
3. Place your disc (MP3 is compatible) in the CD drawer with the label
side facing up.
4. Press the OP/CL button again to close the CD drawer.
Playback will automatically start from first track.
5. MP3 icon will be shown while MP3 is detected. No icon will be shown
when no MP3 file is detected in the disc.
PLAYING RECORDS
This system includes a full-size, 3-speed, belt-drive turntable. You can play 33, 45, and 78 RPM
records.
1. Press POWER to turn the system on.
2. Press the PHONO button to enter the PHONO mode.
3. Make sure that you have removed the stylus cover from the stylus and have released the
Tone Arm Lock that secured the tone arm to the tone arm rest.
4. Set the turntable Speed Selector to the appropriate speed, 33, 45, or 78 RPM. If you are
playing 45 RPM singles, place the 45 RPM adapter on the centre spindle.
5. Place your record on the centre spindle.
6. Raise the CUE lever to lift the tone arm off its rest.
Move the tone arm to the edge of the record. The turntable starts automatically.
Use the CUE lever to gently lower the tone arm onto the record.
7. Adjust the VOLUME control to the desired level.
8. If Autostop button is in ON mode, the unit will stop automatically when tone arm reaches the
end of the record. If Autostop button is in OFF mode, it can’t stop automatically.
Please bring the tone arm to the rest manually.
9. When you finished listening, press POWER button to turn the system off.
NOTE: Do not turn or stop the turntable manually. Moving or jarring the turntable without
securing the tone arm clamp could result in damage to the tone arm.
BLUETOOTH OPERATION
1. Press POWER button to turn the system on.
2. Press BT button to enter bluetooth mode. You can hear a ‘beep’ sound, and now it’s ready for
pairing.
3. Open you Bluetooth device and select ‘ClassicAudio’ in the list.
4. You will hear a ‘beep’ sound when the devices successfully connected. Now you can enjoy
your music with this unit.
NOTE:
1. Wireless distance is up to 10m.
2. Make sure no other bluetooth device is nearby that may affect the connection.

8
COMPACT DISC CARE
• To remove a disc from its storage case, press down on the centre of the case and lift the disc
out, holding it carefully by the edges.
• Fingerprints and dust should be carefully wiped off the discs recorded surface with a soft cloth.
Unlike conventional records, compact discs have no grooves to collect dust and microscopic
debris, so gently wiping with a soft cloth should remove most particles. Wipe in a straight
line from the inside to the outside of the disc. Small dust particles and light stains will have
absolutely no effect on reproduction quality.
• Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive
cleaners to clean the disc. If necessary, use a CD cleaning kit.
• Never write on or affix labels to the surface of compact discs.
RECORD HANDLING
• Do not touch the grooves on the record. Only handle records by the edges or the label. Make
sure your hands are clean. Skin oils from even clean hands can leave a residue on the record
surface that will gradually deteriorate the quality of your record.
label grooves
• Keep your records away from dust. Keep them in a cool, dry place.
• To avoid dust and scratches, keep records in the sleeves and jackets when not in use.
• Do not expose records to direct sunlight or high humidity and temperature. Long exposure to
high temperatures will warp the record.
• Should the record become dirty, gently wipe the surface in a circular motion, using a soft anti-
static cloth.

9
TECHNICAL SPECIFICATIONS
1. Radio am: 530-1600khz fm: 88-108mhz
2. Turntable speed: 33/45/78 RPM
3. Cd can play CD/CD-R/CD-RW/MP3
4. USB connector play MP3 (USB capacity: up to 16GB)
5. Max consumption power: 19 W
6. Output power: 2×2.5 W
7. Weight (NET) 9.1 KGS
We reserve the right to change technical specifications.
WARNING: Do not use this product near water, in wet areas to avoid fire or injury of
electric current. Always turn off the product when you don’t use it or before a revision.
There aren’t any parts in this appliance which are reparable by consumer. Always
appeal to a qualified authorized service. The product is under a dangerous tention.
Old electrical appliances, used batteries and accumulators disposal
This symbol appearing on the product, on the product accessories or on the
product packing means that the product must not be disposed as household waste.
When the product/battery durability is over, please, deliver the product or battery (if
it is enclosed) to the respective collection point, where the electrical appliances or
batteries will be recycled. The places, where the used electrical appliances are
collected, exist in the European Union and in other European countries as well. By
proper disposal of the product you can prevent possible negative impact on
environment and human health, which might otherwise occur as a consequence of
improper manipulation with the product or battery/accumulator. Recycling of materials contributes
to protection of natural resources. Therefore, please, do not throw the old electrical appliances
and batteries/accumulators in the household waste. Information, where it is possible to leave the
old electrical appliances for free, is provided at your local authority, at the store where you have
bought the product. Information, where you can leave the batteries and accumulators for free, is
provided to you at the store, at your local authority.
User manuals download links:
www.maker-times.com/informationclass_11/
Service mail: [email protected]
MADE IN CHINA