MAJORITY CB4A-DAB-WHT Manual

CB4A-DAB-WHT
MAJORITY
ARBURY
DAB / DAB+ Digital and FM Radio
Instrucons Guide

What’s In The Box?����������������������������������������������������3
Instrucons Guide ���������������������������������������������������� 4
Basic Operaon �������������������������������������������������������� 4
DAB/DAB+ Radio������������������������������������������������������� 6
FM Radio������������������������������������������������������������������� 8
Staon Informaon for DAB Radio ���������������������������11
Staon Informaon for FM Radio���������������������������� 12
Clock and Date Seng��������������������������������������������� 13
Dual Alarm Seng��������������������������������������������������� 15
Other Funcons������������������������������������������������������� 17
Internal Rechargeable Baery ��������������������������������� 19
Specicaons ����������������������������������������������������������20
Warranty �����������������������������������������������������������������20
Safety Informaon��������������������������������������������������� 22
Watch video tutorials and register
your product for a FREE 3-year warranty
at www.majorityradios.co.uk
Contents
YEAR
WARRANTY

123
456
789
10
11
12 13 14 15
1
Controls And Funcons
Front View
1. Info/Menu
2. Preset
3. Power/Mode
4. Scan
5. Previous
6. Next
7. Enter/Snooze
8. Volume -
9. Volume +
10. LCD display
11. Antenna

123
456
789
10
11
12 13 14 15
2
Controls And Funcons
Rear View
12. O/On Switch
13. DC 5V,1A Power Connector
14. Charging Light Indicator
15. 3.5mm Headphone Socket

3
What’s In The Box?
1. Majority Arbury DAB / DAB+ Radio Clock
2. UK Standard Plug DC 5V,1A Power Supply
3. User Guide
Box Contents

4
Plug the power connector into the back of the system via the
port that is labelled as DC 5V (Ref.). Alternatively, charge the
radio for approximately 3.5 hours to charge the internal battery.
This will allow for approximately 8-12 hours of charge and
portability
Once powered or charged, switch the Power Supply switch on
the back of the system to‘ON’ (Ref.).
Ensure the antenna (Ref.) is extended as far as possible so that
you can rotate it. This will allow you to receive the best possible
signal before DAB or FM mode are selected.
When you rst switch on the radio, it will be in Standby mode
showing the time and date. The time and date will not yet be set
up, but it will automatically update after you switch to DAB later
on.
Press the ‘Power/Mode’ button (Ref.) to turn on the unit. It will
automatically take you to DAB radio mode or the previous mode
you were using.
If DAB mode is activated, the radio will automatically begin
scanning and storing DAB stations with good signal. The screen
will display “Full Scan”when it is scanning, and will display a
radio station when the scan is complete.
Basic Operation
Instrucons Guide

5
Instrucons Guide
If the radio does not automatically begin scanning, simply press
the ‘Scan’ button (Ref.) to initiate a full scan. Once it is nished,
the rst available station will begin to play.
Now that the DAB stations have been scanned and searched,
you can scroll through the available DAB/DAB+ stations by using
the ‘Prev’ button (Ref.) or‘Next’ button (Ref.). Once you nd
a station you wish to listen to, press‘Enter’ (Ref.) to select the
station.
To change the mode, press the‘Power/Mode’ button (Ref.) to
switch between DAB Radio and FM Radio.
Further guidance on DAB and FM will be provided in the following
pages.
Standby
To place the music system in standby mode, press and hold the
‘Power/Mode’ button (Ref.)
To turn the radio o fully, switch the button on the rear of the
unit (Ref.) to OFF and turn the power o at the mains. This
would be advisable to save the radio’s internal battery charge if
you are operating it in this way instead of operating it from the
mains.

6
DAB/DAB+ Radio
Press the ‘Power/Mode’ button (Ref.) to switch to DAB Radio. On
rst use it will automatically scan all available stations and save
them.
Fully extend the antenna (Ref.).
If the unit hasn’t automatically scanned or you would like to
rescan the available stations, press the ‘Scan’ button (Ref.) and
then release. This would be advisable if you are having trouble
listening to particular stations.
Once you have chosen to scan, the radio will display“Full Scan”
as it starts scanning up the frequency band. Once the scan is
complete, the rst radio station with good signal will begin to
play.
To browse through all of the stations that have been stored, use
the ‘Next’ (Ref.) and ‘Prev’ (Ref.) buttons to scroll through the
stations. Once you have found your desired station, press‘Enter’
(Ref.) to conrm your choice.
When listening to a DAB station, you can access station
information by pressing the ‘Info/Menu’ button (Ref.)
repeatedly to view information available (See page 11).
Instrucons Guide

7
How to store a preset radio station
To be able to quickly access your favourite DAB stations, you can
preset the stations. Up to 10 dierent preset stations can be set
for you to browse between.
To store a station as your preset, it is best to be listening to the
station at the time.
Once listening to the station, press and hold the ‘Preset’ button
(Ref.). The screen will then display“<1: (Empty)” to show the
empty preset 1. To set the station as preset 1, simply press
‘Enter’(Ref.) to conrm your choice.
To set the station as preset number 2 or above, press the ‘Prev’
(Ref.) or ‘Next’ (Ref.) buttons to change the “<1” to the number
you want to store the station as. Follow by pressing the ‘Enter’
button (Ref.) to save.
Once the station is saved as a preset, the display will then show
“Preset (x) stored”.
How to play a preset radio station
To play your preset radio stations, press the ‘Preset’ button to
enter the preset catalogue (Ref.).
Use the ‘Prev’ (Ref.) or ‘Next’ (Ref.) buttons to scroll through
your preset stations from 1-10.
Once you have found your chosen preset station you wish to
play, press‘Enter’ button (Ref.) to select your choice. The station
will now begin to play.
Instrucons Guide

8
Contents
Press the ‘Power/Mode’ button (Ref.) multiple times to switch
to FM. The rst time you do this, FM frequency“87.5 MHz” will be
displayed on the screen.
Fully extend the antenna (Ref.).
To scan for the available stations with good signal, press and
hold the ‘Scan’ button (Ref.) for the radio to begin scanning up
the frequency band. The next available station will then begin to
play.
To go to the next station with good signal, press (do not hold)
the ‘Scan’ button.
The radio will display station information when you press the
‘Info/Menu’ button (Ref.). Press multiple times to view all
information available (See page 11 for more information).
How to tune a specic frequency manually
To listen to a specic frequency, press and hold the ‘Next’ button
(Ref.) to search forward quickly, or the ‘Prev’ button (Ref.) to
search back quickly. It will stop searching when the button is
released.
To search slowly, press the‘Next’ (Ref.) and ‘Prev’ (Ref.) button
multiple times rather than holding.
FM Radio