HovoBot IQX 510 User manual

ROBOT VACUUM CLEANER
Model No. IQX 510
USER MANUAL

Contents
Contents……………………………………………………………………………………………
Applications………………………………………………………………………………………
Main Features……………………………………………………………………………………
Package Contents………………………………………………………………………………
Introduction………………………………………………………………………………………
Structure Introduction…………………………………………………………………………………………
Battery Installation & Replacement…………………………………………………………………………
Cleaner Operations……………………………………………………………………………………………
Manual Charging & Auto Charging…………………………………………………………………………
Remote Control………………………………………………………………………………………………
Virtual Blocker…………………………………………………………………………………………………
Charging Station………………………………………………………………………………………………
Maintenance of the Cleaner……………………………………………………………………
Dust Bin…………………………………………………………………………………………………………
ilter……………………………………………………………………………………………………………
Main Brush and loor Brush…………………………………………………………………………………
ront Wheel……………………………………………………………………………………………………
Trouble Shooting…………………………………………………………………………………
Technical Specifications………………………………………………………………………
Safety Precautions………………………………………………………………………………
01
02
02
02
03
03
04
06
07
08
10
11
12
12
13
14
14
15
16
17

-02-
Applicability:
This roboticvacuum cleaner is designed to be used in homes and small offices. It is not for
outdoor use or commercial use. It has excellent cleaning results on various hard floors
(wood, tile, stone, vinyl, etc) and short-pile carpets. NOTE: It is not suitable for cleaning
plush or long-pile carpets.
Rechargeable Battery
Adapter Virtual Blocker User Manual Trailing Bar with Mopping Pad
Mopping Pad Dust Brush Side Brush Filter
Main Body
Remote Control Charging Station
Main Features:
This multi-function robotic vacuum cleaner has strong cleaning power. It comes with a user
friendly interface to easily perform the following functions.
• Just push one button to do AUTO cleaning,SPOT cleaning or mopping.
• Handy remote control unit with LCD display to control cleaner operations, movements plus
cleaning and power it On/Off.
• Easy to set up pre-programmed schedule with remote control to do cleaning any time you want
• When battery power is low, it will return to charging station and re-charge its battery
automatically.
• Two movement speeds and easy to read error code on remote to indicate abnormal conditions
• Soft-touched and non-collision obstacle detection to protect furniture in your home
Package Contents:
1. Main Body x 1pc
2. Remote Control x 1 pc (2 AAA batteries not included)
3. Charging Station x 1 pc
4.Adapter x 1 pc
5．Virtual Blocker ×1 pc (2 AA batteries not included)
6.User Manual x 1 pc
7.Trailing Bar x 1 pc
8.Mopping Pad x 2 pcs (one attached to trailing bar)
9. Dust Brush x 1 pc
10. Side Brush x 2 pcs
11. Filter x 3 pc
12. Rechargeable Battery x 1 pc

Cliff detection sensor
Cliff detection sensor
Right wheel
Floor brush
Dust box
Main brush
Power switch
DC socket
Left wheel
Side brush
Front wheel
Battery cover
Introduction
Main Unit Features
Power indicator
Top cover
AUTO/automatic cleaning
SPOT/spot cleaning
CHARGE / charge
Handle
Signal receiver
Auto-charging electrodes
obstacle dHtection sensors

Battery Replacement & InstallDWLRQ
Take the battery out if you do not use the cleaner for a long time.
Turn off Power before removing battery from the machine.
Don’t put the battery at hot environment (over 45C/113F) or in the water.
Don’t apply large external force to battery or drop it from high place.
Battery must be recycled. Do not disposal of it in household trash or in fire. Otherwise,
it might explode under high heat.
In case of battery leakage, don’t let the liquid exposed to skin or clothes. Immediately
wipe it with dry clothesand send damaged battery to recycling station.
Do not use battery from any other suppliers when you replace the battery.
To extend battery life, make sure to charge battery manually for 12 hours when you use the
cleaner for the first time, or remove battery for storage when you will not use cleaner for a
long time. Otherwise, the performance of cleaner will be affected and running time will be
much shorter than the normal working time. It normally take a few charging / discharging
cycles for the battery to reach peak performance.
8.
7.
6.
5.
4.
3.
2.
1.
1. Remove 2 screws to open battery compartment door. (See Fig. 1)
2. Connect battery plug to the connector on main unit. (See Fig. 2)
3. Make sure battery polarity is correct to avoid potential damage to the machine.
4. Leave the cleaner in charging status to keep the battery at best performance while not in use.
5. Only use original battery from manufacturer when you replace the battery.
Fig.2
Fig.1

1.
2.
3.
Battery replacement on Virtual Blocker:
1. Open battery door (see Fig. 1).
2. Install 2 AA size batteries (not included)
in correct polarity (+/-)
(See Fig. 2 and Fig. 3)
3. Please take the battery out if the cleaner
will not be used for a long time.
Battery replacement - Remote Control:
1. Open the battery door and replace 2 AAA size
batteries (not included). (See Fig. 1)
2. Make sure the battery polarity is correct
(See Fig. 2)
3. Please take the battery out if your cleaner
will not be used for a long time.
Please don’t put battery in high-temperature environment (> 45C or 113F)
or in the water.
Please don’t apply large force to the battery or drop it from high place.
Battery should be recycled. Please don’t discard it in household trash
or throw it in fire. It might cause explosion!
Fig 1 Fig 2 Fig3
Fig 1 Fig 2

Functions of Buttons
:
Power Switch (on main unit):
After the cleaner is powered on, it will enter into standby mode, and power indicator light
would be on.
AUTO (Automatic cleaning):
Press AUTO button on main unit or remote control to let the cleaner start cleaning automatically.
When battery power is low, it will automatically search for charging station to re-charge its battery.
Press any button on cleaner panel to stop the AUTO cleaning.
Tips:
When battery power becomes low during cleaning, cleaner will beep for 10 times and automatically
search for charging station to re-charge its battery. The CHARGE indicator light will also be on.
Before cleaning, you need to clear any clutters on the floor.
Tips:
The power indicator light is on when the cleaner is working;
The power indicator is blinking when battery charging is in progress;
The power indicator will stop blinking after it is fully charged.
SPOT (Spot cleaning):
Press SPOT button on main unit or remote control, and the cleaner will automatically clean a 3ft
x 3ft area of in spiral mode for about 2 ~ 3 minutes and then stop.
Press any button on cleaner panel to stop SPOT cleaning.
Tip:
When battery power becomes low during cleaning, cleaner will beep for 10 times and automatically
search for charging station to re-charge its battery. The CHARGE indicator light will also be on.
CHARGE (Charging the battery):
Press CHARGE button on main unit or remote control, and the cleaner will start
searching for charging station to re-charge its battery.
Press any button on cleaner panel to stop it.
NOTE: The default cleaning setting of cleaner is in Fast (moving speed) moving mode.
Press SPEED button on remote control to change moving speed (Fast or Slow) based on
floor type to be cleaned.

Manual Charging & Auto Charging:
Manual Charging:
1. You can use either AC adapter or
charging station to charge the cleaner
2. Method 1: Turn on the cleaner and
connect adapter’s output plug to the
socket on cleaner (See Fig. 1).
3. Method 2: Before charging, turn on the
cleaner and connect adapter to the
Put the cleaner in front of charging station,
with the charging prongs on main unit towards
charging station. (See Fig 2)
4. Press CHARGE button on the main unit or
remote control, and the cleaner will
start docking to the charging station and
re-charging the battery (See Fig. 3)
5. When the cleaner is trying to dock to charging station,
if you want tRstop it, just press CHARGE button
on cleaner panel, or press STOP or CHARGE button
on remote control.
6. During battery charging process, cleaner’s power indicator will
blink.
The power indicator will stop blinking when battery is fully charged.
Automatic Charging:
When battery power becomes low during cleaning, the cleaner will beep 10 times and it
will automatically search for the charging station for re-charging with CHARGE button light
on.
Tip: When it just finisheVcKDUJing, battery maybe warm or even a little hot. Battery
charging time could be longer.
Fig.1
Fig.2
Fig.3
manually.
manual charging
charging station.

-08-
Remote Control:
Control Panel of Remote Control:
Day of week
Emission signal
Pre-set to select all or turn
off charging indicators
Set current time (clock)
Speed
Stop
Power button
Confirm
Current timeFORFN
Scheduled clean time
Set cleaning schedule
Charge
Automatic cleaning
Spot cleaning
Direction buttons
Tips: Code check is required before you use the remote control, or it will fail to work.
Code check steps: Please make sure that both cleaner & remote control have
enough power left, then follow the steps below.
A: Turn off the cleaner;
B: Press and hold “OK” button on remote control;
C: Turn on the cleaner;
D: After the cleaner beeps 2 or 3 times, release the “OK” button. The code check
is successfullycompleted now.
★Note: If you do not hear beeping sounds 2 ~ 3 times during the code check process, just
repeat above steps.
TIMER

Functions Introduction of Remote Control:
SPEED selection: press “SPEED” button on the remote control, you can
choose fast or slow speed.
fast speed slow speed
TIMER (Setting up clock)
Press “
TIMER
” button first and then press button to move the blinking digit on the remote
control screen to switch between hour, minute & "day of week" sections (as shown on Pic 1)
Press buttons to change the value and set up
hour, minute & day of week respectively.
★Tip: During the setting, press button to quit; press
“
TIMER
” button to save the current setting.
 SET (pre-set cleaning):
A: Pre-set time
Press “SET” button first and then press the blinking digit on remote control screen
the remote control will switch among hour, minute & weekday (as shown on Pic 2)
Press to change the value and schedule
a idea time that you want the machine work.
B: Pre-set weekday:
In “day of week” section, press "OK” to select the day.
" ",
under it.
Press " ALL" button to select all days of the week , press it again to clear
all .
★Tip: During the setting, press the to exit (not save setting); press “SET” to save current
setting.
FULL GO FUNCTION
1.Press the “SET” button, the screen shows a shinning spot ,then press the “STOP”
button, you can see “ ”displaying with the first F flashing, press again the “SET” to
stop flashing which indicates FULL GO function is activated, so the machine can automatically
clean when has been fully charged.
2. To cancel the FULL GO function, first press the SET button to see “ ”
displaying
on the screen with the first “F” flashing,then press STOP and after you
again, the FULL GO function is canceled.
press the SET button
★Tip:
: hen the FULL GO function is set, the pre-setting function is unavailable.
Pic1
Pic2
W
SET (Set up cleaning schedule):
A: Set cleaning time (hours & minutes):

will switch between hour, minute &“day of week” sections (as shown on Pic 2).
a time that you want the unit to start cleaning.
B: Set cleaning day(s) of week:
The selected day will have a “bar”
“FULL CHARGE& GO” FUNCTION
1. Press “SET” button, remote control screen will show a blinking digit . Press “STOP” and
you will see “ ”displayed with the first letter “F” blinking. Press “SET” again it will
stop blinking. This indicates that “FULL CHARGE& GO” function has been activated. The cleaner
will automatically start
cleaning once its battery has been fully charged on the charging station.
2. To cancel the “FULL CHARGE& GO” setting, first press SET button to have “ ” displayed
on remote control screen with first letter “F” blinking, then press STOP. Now, press SET button
again and
the “FULL CHARGE& GO” setting is cancelled.
★Tip:: When “FULL CHARGE& GO” function is set, the scheduled cleaning function will NOT
WORK.