HTC BS C100 User manual

HTC BS C100 Bluetooth® Car Speaker
User Guide
hp://www.htc.com/www/support/warranty.html

1
English
Overview
Thank you for purchasing the HTC BS C100 Bluetooth® Car Speaker. We hope you enjoy it! This
User Guide will get you started and ready to make the most of your car speaker.
About your HTC BS C100
What your car speaker can do
Your HTC BS C100 lets you do all this:
Answer calls•
End calls•
Reject calls•
Last number redialling•
Mute•
Voice search•
Volume buon
Mute buon ( )
Mul-funcon
buon ( )USB
connector
Visor clip Power buon
()
LED
indicator

2
English
Specifications
Talk me up to• x hours/standby me up to xxx hours
Rechargeable baery with charging opon from car charger or PC via USB cable•
LED light for status and baery indicator•
Qualied for Bluetooth Specicaon version 2.0 + EDR (enhanced data rate), supporng •
Headset and Hands-free Proles.
e-SCO for enhanced audio quality•
Size: • xxmm (L) x xxmm (W) x xxmm (T)
Weight: • xx grams
Getting Started
The HTC BS C100 is easy to operate. On the inial setup, do the following:
1. Charge your car speaker
Before using HTC BS C100 for the rst me, you need
to charge it by the supplied micro USB cable with
your car charger for about 8 hours. Normal charge is
approximately 3.5 hours.
While charging the LED indicator lights orange. It •
turns green when the baery is fully charged.
Note:
HTC BS C100 is funconal while charging.
The and buons on the car speaker performs dierent funcons depending on
how long you press it.
- Press: Less than 1.5 seconds
- Long press: more than 1.5 seconds

3
English
2. Power ON/OFF
To turn on the speaker, • press the buon. The LED indicator lights green (for 3 seconds)
indicates the speaker is turned on.
To turn o the speaker, • press again the buon. The LED indicator lights orange (for 3
seconds) indicates the speaker is turned o.
3. Pairing and connect
Bluetooth car speaker needs to be paired to your mobile phone before it can be used.
1. Make sure the car speaker is turned o and turn o any
Bluetooth devices previously paired with your car speaker.
2. Turn on the Bluetooth feature on your phone and long press the
buon to turn on the car speaker. The LED indicator displays
an alternang green and orange light, this indicates the car
speaker is in pairing mode.
3. Set your mobile phone to search for Bluetooth devices, and select HTC BS C100 from
the search results on your mobile phone.
4. The car speaker will play an audible tone along a steady green light to indicate the pairing is
successful and devices are connected.
Reconnecng the car speaker to mobile phone
a. When the car speaker is turned o then on again. It will aempt to re-establish the
connecon to your mobile phone automacally.
b. Alternavely, you can long press the buon to re-establish the connecon manually.
4. Test your connecon
To test connecon to your phone, do the following:
1. Place the car speaker onto your visor.
2. Make a call from your mobile phone. If your mobile
phone and car speaker are successfully connected,
you can hear the ringing tone on the car speaker.
3. Adjust the volume level (if necessary).

4
English
Reseng the pairing devices
Long press the XX buon to clear all pairing informaon stored in HTC BS C100. The car speaker
will automacally turn o aer approx. 20 seconds.
How to…
Making a call
Use your mobile phone in the normal way to make a call.
Answering a call
Press the buon to answer the call.
Last number redial
Press the buon twice to acve last number redial.
Ending a call
During a call, press the buon to hang up. If the other person hangs up rst, then the call will
be ended automacally.
Rejecng a call
Long press or press the buon to reject the incoming call.
Mung a call
During a call, press the buon and the car speaker will mute. To cancel mute, press the
buon again.
Note:
If the microphone is muted, the prompt tone will be played back for every 5 seconds.
Making a voice dial call
Long press the buon and wait for the voice prompt.
Adjusng sound and volume
To increase the volume, press the Volume up (+) buon.•
To decrease the volume, press the Volume up (-) buon.•

5
English
Baery
When the baery needs charging, the LED indicator lights orange. If you do not charge the car
speaker, it automacally turns o.
What the LED indicator mean
Event LED color Status
General
Green (Solid for 3 seconds) Car speaker is turned on
Orange (Solid for 3 seconds) Car speaker is turned o
Orange (Solid, connuous) Baery is low
Green (Blink) Incoming call
Green (Solid, connuous) Call in progress
Pairing
Alternang Green and
Orange (Blink)
Pairing mode
Green (Solid, connuous) Devices are successfully paired
Orange (Blink)Devices are unsuccessfully paired
Charging
Orange (Solid, connuous) Baery charging
Orange (Blink) Charging error
Green (Solid, connuous) Charging complete
Troubleshooting & FAQ
I hear crackling noises
Bluetooth is a radio technology, which means it is sensive to objects between the car •
speaker and the connected device. It is designed for the car speaker and the connected
device to be used within 33 feet (10 meters) of each other, with no major objects in the way
(walls, etc.).

6
English
I cannot hear anything from my car speaker
Increase the volume in the car speaker.•
Ensure that the car speaker is paired to your mobile phone.•
Make sure your phone is connected to the car speaker.•
I am having pairing problems
You may have deleted your car speaker pairing connecon in your mobile phone.•
Follow the pairing instrucons.•
I want to reset the car speaker
It is possible to reset and test the car speaker by ’long press’ the XX buon unl the alternang
green and orange lights are o. The car speaker will automacally turn o aer approx. 20
seconds. The next me you power on, the car speaker will go into pairing mode as the rst me
you powered your new HTC BS C100 on.
Will the HTC BS C100 work with other Bluetooth equipment?
The HTC BS C100 is designed to work with Bluetooth mobile phones. It can also work with other
Bluetooth devices that are compliant with Bluetooth version 1.1 or higher and support hands-
free and/or advance audio distribuon prole.
I cannot use Reject call, Redial, or Voice Dialling feature
These features are dependent on the ability of your mobile phone to support a hands-free
prole. Even if the handsfree prole is implemented reject call, call hold and voice dialling are
oponal features which are not supported by all devices. Please consult your device manual
for details.
The mobile phone is not connected to my car speaker in me to answer an incoming call
If the car speaker is o and is turned on when a call is incoming, the mobile phone and
car speaker might not connect in me for the call to be answered. In order to avoid such
inconveniences please keep the car speaker on, in range and connected.

7
English
Taking care of your car speaker
Always store the • HTC BS C100 with the power o and safely protected.
Avoid storage at extreme temperatures (above 45°C/113°F – including direct sunlight – or •
below -10°C/14°F). This can shorten baery life and may aect operaon.
High temperatures may also degrade performance. Do not expose the • HTC BS C100 to rain
or other liquids.
WARNING!
Car speakers are capable of delivering sounds at loud volumes and high pitched tones. Exposure
to such sounds can result in permanent hearing loss damage. The volume level may vary based
on condions such as the phone you are using, its recepon and volume sengs, and the
environment. Please read the safety guidelines below prior to using this car speaker.
Safety guidelines
1. Prior to using this product follow these steps:
Before using the car speaker, turn the volume control to its lowest level, •
Make a test call, and then •
Slowly adjust the volume control to a comfortable level.•
2. During the use of this product
Keep the volume at the lowest level possible and avoid using the car speaker in noisy •
environments where you may be inclined to turn up the volume;
If increased volume is necessary, adjust the volume control slowly;•
3. Keep out of reach of children
The plasc bags the product and its parts are wrapped in are not toys for children. The bags
themselves or the many small parts they contain may cause choking if ingested.
4. Never try to dismantle the product yourself
None of the internal components can be replaced or repaired by users. Only authorised dealers
or service centres may open the product. If any parts of your product require replacement for
any reason, including normal wear and tear or breakage, contact your dealer.

8
English
5. ACA TS028 – Ignion of ammable atmospheres
Do not use the car speaker in environments where there is a danger of ignion of ammable
gases.
Certification
CE
This product is CE marked according to the provisions of the R & TTE Direcve (99/5/EC). Hereby,
HTC, declares that this product is in compliance with the essenal requirements and other
relevant provisions of Direcve 1999/5/EC.
For further informaon please consult hp://www.HTC.com
Within the EU this device is intended to be used in Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
The Netherlands, United Kingdom, and within EFTA in Iceland, Norway and Switzerland.
Bluetooth
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such
marks by HTC is under license. Other trademarks and trade names are those of their respecve
owners.
Compability for a Beer Environment
The Direcve on Waste Electrical and Electronic Equipment (WEEE), which entered into force
as European law on the 13th February 2003, resulted in a major change in the treatment of
electrical equipment at end-of-life.
The purpose of this direcve is, as a priority, the prevenon of WEEE, and in addion, to
promote the reuse, recycling and other forms of recovery of such waste so as to reduce disposal.
The WEEE logo on the product or on its box indicates that this product must not be
disposed of or dumped with your other household waste. You are liable to dispose of all your
electronic or electrical waste equipment by relocang over to the specied collecon point for
recycling of such hazardous waste. Isolated collecon and proper recovery of your electronic
and electrical waste equipment at the me of disposal will allow us to help conserving natural
resources. Moreover, proper recycling of the electronic and electrical waste equipment will

9
English
ensure safety of human health and environment. For more informaon about electronic and
electrical waste equipment disposal, recovery, and collecon points, please contact your local
city centre, household waste disposal service, shop from where you purchased the equipment,
or manufacturer of the equipment.
FCC Regulaons:
This device complies with part 15 of the FCC Rules. Operaon is subject to the following two
condions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operaon.
This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon
against harmful interference in a residenal installaon. This equipment generates, uses and
can radiated radio frequency energy and, if not installed and used in accordance with the
instrucons, may cause harmful interference to radio communicaons. However, there is no
guarantee that interference will not occur in a parcular installaon If this equipment does
cause harmful interference to radio or television recepon, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separaon between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modicaons not expressly approved by the party responsible for compliance could
void the user‘s authority to operate the equipment.
The antenna(s) used for this transmier must not be co-located or operang in conjuncon with
any other antenna or transmier.