Huawei MateBook 13 User manual

WRTB-WFE9L/WRTB-WAH9L

Contents
English..............................................................................................................................................1
Français.......................................................................................................................................... 16
简体中文...........................................................................................................................................26
Español(Latinoamérica)................................................................................................................ 35
香港繁體...........................................................................................................................................45
...........................................................................................................................................54
................................................................................................................................................65
Indonesia ....................................................................................................................................... 77
Tiếng Việt .......................................................................................................................................87
i

Getting to know your computer
3
4
5
6
8
7
9
10
12
English
1

1
Camera
2
Camera indicator
3
One touch power button
4
Huawei Share icon *
5
Touchpad
6
Power port
7
Headset jack
8
Charging indicator
9
USB-C port
10
Microphone
* Huawei Share icon
Do not tear or damage the Huawei Share icon on the computer, otherwise, Huawei Share
OneHop will not work properly.
•Only certain HUAWEI/HONOR phone models support Huawei Share OneHop. For details
on such models, visit our official website for more information.
•The NFC detection area varies with different HUAWEI/HONOR phone models, but it is
commonly located near the rear camera.
2

Initial setup
•When using your computer for the first time, connect it to the power adapter, and wait for
the screen to turn on to access the setup screen.
•When you turn on your computer again, press and hold the power button until the keyboard
lights up.
Force shutdown: Press and hold the power button for more than 10 seconds. Do note that this
will result in loss of any unsaved data.
When you use your computer for the first time, follow the onscreen instructions to complete the
setup.
•Connect to a wireless network
•Log in to your computer using a Microsoft account
Log in with your Microsoft account (such as Outlook.com) to access a range of Microsoft
services on your computer.
•Set up Windows Hello and add a fingerprint
The fingerprint sensor power button allows you to turn on your computer without the need to
enter a password. It is quick and secure.
•Set a PIN
Use your PIN to log in to your computer and access other apps and services.
After desktop is displayed, complete the following promptly.
•Activate Windows: When your computer is connected to the Internet for the first time, Windows
is activated automatically.
After your computer is connected to the Internet for the first time, you may hear noises
generated by the fan or feel that the computer is getting hot. This is normal during an
automatic Windows system update.
3

Getting started
Start menu
On the home screen, click to open the start menu. You can:
•Click to access the computer settings.
•Click to turn off or restart your computer, or enable sleep mode.
Action center
To launch the action center, click . You can then:
•Quickly access the settings, VPN and projector screens.
•Quickly change frequently-used settings (such as Airplane mode and screen brightness).
4

Charging your computer
Your computer has a built-in rechargeable battery, and you can charge it using the adapter and
USB-C charging cable that came with it. The indicator blinks white during charging.
You can use the power port on the left for charging and transferring data. The USB-C port on
the right is a DisplayPort and can also be used for transferring data.
5

Features
One-touch log in. Password free
The computer features a fingerprint sensor power button. Set your password and PIN in Windows
Hello and add your fingerprint. You can then power on and unlock your computer by simply
pressing the power button with no need to enter your password. It is quick and secure.
•Press the power button to log in to your computer when it is powered off or in sleep mode.
•Touch the power button to unlock your computer when the screen is on.
You can add a maximum of 10 sets of fingerprints.
Restore to factory settings
Before restoring to factory settings, connect your computer to the power supply and back up
the data in Disk C. You can also first access the backup and restore screen and follow the
onscreen instructions to back up the data in Disk C.
Press and hold F10 during power-on to access the restore factory settings screen. Follow the
onscreen instructions to restore your computer to factory settings.
6