Huawei MateBook 14 User manual

User Guide

Contents
About this user guide
New devices
Step 1: Connecting to a network 2
Step 2: Activating Windows 2
Step 3: Enrolling a ngerprint 3
Step 4: Updating the drivers 3
Highlighted features
Huawei Share OneHop 5
Eye Comfort mode 5
F10 system reset/factory reset 6
Getting to know your computer
Powering your computer on/o 7
Appearance 7
Keyboard 10
Touchpad 11
Charging your computer 14
Learn about Windows 10
Using the Start menu 15
Action center 15
Placing shortcuts onto your desktop 16
Accessories and extensions
HUAWEI MateDock 2 18
Bluetooth mouse 20
Appendix
Safety information 22
Personal Information and Data Security 28
Legal Notice 29
i

About this user guide
This guide is intended for computers running on Windows 10 systems. This guide describes
the basic features of your computer. For more information about Windows 10 features,
please visit https://www.microsoft.com or click > on your desktop.
1
2
Tips
The optional accessories and software described in this guide may not be available or up-to-
date; the system environment described in this guide may vary from your actual system
environment; the pictures in this manual may dier from the actual product. All illustrations
are for reference only. Please refer to the actual product.
Indicators
Description Highlights important information and tips and provides additional
information.
Note Indicates potential issues that may lead to damage, data loss, etc., if
left unattended.
Warning Warns you of potential hazards that could result in serious personal
injury if not avoided.
1

New devices
Step 1: Connecting to a network
1Click (or ) in the lower right corner of your desktop to open the Wi-Fi network
connection screen.
2Select the name of the Wi-Fi network you want to connect to and follow the onscreen
instructions to establish a connection. Some Wi-Fi networks may require a network
security key or password to establish a connection.
There are dierences between operating system versions of the computers before
delivery. Therefore, some computers display a dialog box for setting the boot parameters
after connecting to the network for the rst time. Click OK and set the boot parameters
as required.
Step 2: Activating Windows
Windows automatically activates upon the initial network connection. You can also check
whether Windows is activated from the Control Panel.
If Windows activation fails, restart your computer and reconnect to the network; if the issue
persists, connect to a dierent network or wait a moment and try again.
•If Windows is not activated, some features on your computer may be restricted.
•Activating Windows may aect the return of the product. For more information, please
refer to the product's warranty policy.
2

Step 3: Enrolling a ngerprint
Your computer utilizes a ngerprint-sensing power button. After enrolling a ngerprint, you
can press the Power button to quickly and securely power on and unlock your computer,
without the need to enter a password.
If you have skipped the ngerprint enrollment process during the initial setup phase, go to
> > > . In Windows Hello, set your login password and PIN code, and then
follow the onscreen instructions to enroll your ngerprints.
•Ensure that your ngers are clean and free of substances. Otherwise, it will aect the
quality of the ngerprint enrollment.
•Each user can enroll up to 10 ngerprints per account.
Step 4: Updating the drivers
Open PC Manager and click Manager drivers. If a new driver update is available, follow the
onscreen instructions to complete the update.
New devices
3