Hubbardton Forge Vermont Modern Copernicus Task Lamp 277830D Programming manual

Assembly & Installation Instructions
C84
1

Castleton, Vermont USA | VERMONTMODERN.COM 37245
Assembly & Installation Instructions
C84
Copernicus Task Lamp 277830D
Contents
2

Castleton, Vermont USA | VERMONTMODERN.COM 37245
Assembly & Installation Instructions
C84
Copernicus Task Lamp 277830D
Component Parts
3
A. Fixture Base
B. LED Assembly
C. Stainless Steel Rod (2)
D. Gripper (2)
E. Power Supply

Castleton, Vermont USA | VERMONTMODERN.COM 37245
Assembly & Installation Instructions
C84
Copernicus Task Lamp 277830D
Complete Lamp Assembly (Figure 1 )
CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND
PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with
applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*
Caution: Do not exceed maximum wattage noted on fi xture. Use only recommended bulbs with fi xture.
Please Note: After installation extra hardware and accessories are possible due to our kits are used on multiple products and options.
4
1. Carefully unpack the lamp from the carton.
2. Locate (+) and (-) labels on LED assembly (B) with stainless steel rods (C) attached.
3. Follow (+) label along stainless steel rod (C) and align with (+) label on fi xture base (A).
4. Insert stainless steel rods (C) into grippers (D).
5. Locate power supply (B). Plug power supply (B) into fi xture connector.
If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product. We
hope you enjoy your xture. Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this
xture.
Note: LED assembly (B) should be located on same side of fi xture base (A) as switch.
(Figure 1)
A
C
D
E
B
SWITCH
Note: Switch is touch sensitive.