Product Diagram and Operation
2
Type-C Port
Power Button
Timer
Mode
Indicator
ON/OFF
Tap the Power Button to turn on and off the lamp.
ADJUST BRIGHTNESS AND RGB COLOR
1.On White Light Mode, hold the Power Button to adjust the brightness from 3% to 100%;
2.On RGB Mode, hold the Power Button to select your desired color from 16 million
colors;
3.On Auto-Cycling RGB Mode, hold the Power Button to change the color cycling speed.
There are three different auto-cycling modes.
SET TIMER
Tap the Timer Button to set an auto-off in 30/60 minutes.
One green indicator: auto-off in 30 minutes;
Two green indicators: auto-off in 60 minutes;
Two white indicators: timer is off.
SET MODE
Tap the “M” Button to change the light mode.
Mode switching sequence:
1. White Light Mode: 2000K Warm White
2. White Light Mode: 4000K Neutral White
3. White Light Mode: 5700K Cool White
4. RGB Mode
5. Auto-Cycling RGB Mode
Hold the timer button to reset the lamp. The lamp is ready to connect with WiFi when
the indicator flashes quickly in green.
RESET THE LAMP
