Huisen Furniture S46-020-096-10 User manual

2 TIER DESK
S46-020-096-10
O DO NOT OVERTIGHTEN SCREWS.
HAND TIGHTEN ONLY. DO NOT USE
POWER TOOLS IN ASSEMBLY.
WARNING
DO NOT RETURN THE PRODUCT TO THE
STORE.
INDIVIDUAL STORES DO NOT STOCK
PARTS.
FOR MISSING OR DAMAGED PARTS CALL
1-800-729-1569.
PARTS WILL BE SHIPPED FREE OF CHARGE.
FOR PROMPT, RELIABLE SERVICE, PLEASE
HAVE YOUR ASSEMBLY MANUAL READY.
LOT NUMBER______________
DATE OF PURCHASE___/___/___
• CALL OUR TOLL FREE NUMBER 1-800-729-1569 FOR FURTHER ASSISTANCE.
• ADDITIONAL PARTS ARE AVAILABLE FOR A FEE.
• THIS INSTRUCTION BOOK CONTAINS IMPORTANT SAFETY INFORMATION.
• PLEASE READ IT AND KEEP FOR FUTURE REFERENCE.
• DO NOT ALLOW CHILDREN TO CLIMB OR PLAY ON THE UNIT.
• CLEAN THE PRODUCT WITH YOUR FAVORITE FURNITURE POLISH AND A SOFT CLOTH.
• DO NOT USE HARSH CHEMICALS OR ABRASIVE CLEANERS.
• MOVE YOUR NEW FURNITURE CAREFULLY WITH TWO PEOPLE. NEVER PUSH OR DRAG THE UNIT.
We are available to assist you Monday - Friday
from 9:00 am - 5:00 pm Eastern Standard Time.
800-729-1569
USA only.
Huisen Furniture (Longnan) Co., Ltd.
Designed in the USA
Made in China
RECOMMENDED NUMBER OF PEOPLE FOR ASSEMBLY : 1
ESTIMATED ASSEMBLY TIME: 1 HOUR
TOP SHELVES MAXUMUM LOAD
13 LBS (5.91 KG)
SHELVE MAXIMUM LOAD
40 LBS (18.18 KG)

BEFORE STARTING
DO NOT USE POWER TOOLS TO ASSEMBLE YOUR
FURNITURE. POWER TOOLS MAY DAMAGE THE
PARTS AND RESULT IN DAMAGE.
We are available to assist you Monday - Friday
from 9:00 am - 5:00 pm Eastern Standard Time.
800-729-1569
USA only.
Huisen Furniture (Longnan) Co., Ltd.
Designed in the USA
Made in China
TOOLS NEEDED TO ASSEMBLE
• Read and understand all the steps carefully before
starting. If each step is not followed in the correct
order the assembly will be difcult and may result
in damages.
• Work in a spacious area, preferably on a carpet-
ed surface, near where the unit will be used.
• Make sure all the parts are included. Most boards
are labeled with a removable sticker.
• Call our toll free number if you need assistance. We
are available to assist you Monday - Friday from 9:00
am - 5:00 pm Eastern Standard Time.
• 800-729-1569 USA only.
Helpful hints
hammer philips head
screw driver
at head
screw driver
2 TIER DESK
S46-020-096-10

We are available to assist you Monday - Friday
from 9:00 am - 5:00 pm Eastern Standard Time.
800-729-1569
USA only.
VERIFY THAT ALL PARTS ARE LISTED BEFORE BEGINNING
2 TIER DESK
S46-020-096-10
CAM FASTENING SYSTEM EXAMPLE

We are available to assist you Monday - Friday
from 9:00 am - 5:00 pm Eastern Standard Time.
800-729-1569
USA only.
VERIFY THAT ALL PARTS ARE LISTED BEFORE BEGINNING
2 TIER DESK
S46-020-096-10

PARTS
Insert the 2 cam bolts into panel (A) by tightening with your screwdriver.
Insert nuts into panel (A) with the holes facing the holes on the edge of the
panel.
1ADDITIONAL NOTES
Make sure that the nut’s
hole is facing the pre-
drilled hole in panel A
side.

PARTS
Insert 2 of the cam locks, 4 of the wood dowels and 4 of
the nuts into panel (B)
2ADDITIONAL NOTES
Make sure that the nut’s
hole is facing the pre-
drilled hole in panel A
side.

PARTS
Connect back panel (B) to panel (C) with number (7)
screws.
Connect metal bar (D) to panel (C) using number (4) pan
head screws as shown.
3ADDITIONAL NOTES
Please note the back panel (B)
with holes facing down.

Connect Top Panel (A) to Panel (B).
SPECIAL NOTE:
2 cam locks should be tightened on panel B.
4

PARTS
Using the long & short at head screws, connect the left &
right legs (E & F) to your pre-assembled panels.
NOTE: The short at head screws should be screwed into
the (G & D) metal bars.
5ADDITIONAL NOTES
USE INCLUDED ALLEN WRENCH
TO TIGHTEN BOLTS 5 & 8.

USING YOUR USB PORT:
• Plug USB cord into computer’s USB port.
• Connect up to 2 USB device.
• Use for quick and easy transfer of your photos, music and les.
• Charge devices such as cell phone and tablets. (Rate of charge will vary and may be
slower than charging with OEM provided equipment. You may use with OEM wall
charge adapter (not included).
6ADDITIONAL NOTES
COMPLETLY TIGHTEN ALL SCREWS
AND CAM LOCKS PRIOR TO USE.