HURST 600 HP Euro Owner's manual

(material spec., grade, size, material thickness, MAWP)
(name of part, item number, manufacturer's name, and identifying stamp)
1. Manufactured and certified by
2. Manufactured for
3. Location of installation
(name and address of manufacturer)
(name and address)
FORM H-2 MANUFACTURER'S DATA REPORT FOR ALL TYPES OF BOILERS
As Required by the Provisions of the ASME Code Rules, Section IV
4. Unit identification
(manufacturer's serial no.)
(National Bd. no.)(complete boiler, superheater, (drawing no.)(CRN) 21033ES1611-125W-5 1500479N/AEURO SCOTCH (year built)
2015
EXCEPT WATERTUBE AND THOSE MADE OF CAST IRON
waterwall, economizer, etc.)
5. The chemical and physical properties of all parts meet the requirements of material specifications of the ASME BOILER AND PRESSURE VESSEL CODE. The design, construction
and workmanship conform to ASME Code, Section IV, (year)
2013 [addenda (as applicable) (date)] NONE (Code Case no.) NONE
(material spec., grade)
8. Tubesheet
(thickness)(no.) (material spec., gr.)
6. Shells or drums
7. Joints
10. Heads
[long. (seamless, welded)]
WELDED [eff. (compared to seamless)] 85% [girth (seamless, welded)] N/A (no. of shell courses) 2
(inside diameter) [length (overall)]
1/2"1 SA-516-70 N/A N/A
No.9. Tubes:
(flat, dished, ellipsoidal)
FLAT (radius of dish) N/A
(thickness)
3/4"
(straight or bent)
Straight
(name and address of purchaser)
MOREX, INC., 1609 CROSS BEAM DRIVE, CHARLOTTE, North Carolina, 28217
KING KHALID HOSPITAL, SAUDI ARABIA
(inside diameter) [length (overall)]
6' 6" 15' 2"
SA-516-70
(material spec. no.)
SA-516-70
(thickness)
3/4"
(material spec., grade)
108 SA-178-A
Tube holes
(number and diameter)
108 @ 3-1/32"
Diameter 3" Length Gauge (or thickness)
0.105
(if various, give max. and min.)
11. Furnace [size (O.D. or W x H)]
44" [length (each section)] 163-1/8"
(thickness)
3/4"
(material spec., gr.)
SA-516-70 (no.) 1(total) 163-1/8" [type (plain, corrugated, etc.)]
Seams
[type (seamless, welded)]
WELDEDPLAIN
12.Staybolts [size (diameter)]
1-1/2" (telltale) N/A
(size)
N/A
(material spec., gr.)
SA-675-70
(no.)
16 (net area) 28.3 SQ. IN. [pitch (horizontal and (MAWP) 125W12.94"
Manufacturer's Partial Data Reports properly identified and signed by Commissioned Inspectors have been furnished for the following items of this report
13. Stays or braces:
15. Nozzles, inspection and safety valve openings:
14. Other parts: 1. 2. 3.
TURNAROUND WRAPPER TURNAROUND TOP PLATE TURNAROUND BACK PLATE
(brief description, i.e. dome, boiler piping)
(1) 3/4" THICKNESS, SA-516-70 PLATE, WELDED TO SHELL
2.
3.
1.
(1) 1-3/8" THICKNESS, SA-516-70 PLATE, WELDED TO TURNAROUND WRAPPER
(1) 3/4" THICKNESS, SA-516-70 PLATE, WELDED TO TURNAROUND WRAPPER
Hurst Boiler & Welding Co., Inc., 21971 U.S. Hwy 319 North, Coolidge, Georgia, 31738
Boiler Horsepower
600
52 @ 183-1/2" & 56 @
153-1/2"
Location Material Spec. Type Number and Size Pitch Total Net
Area
Fig. HG-343
L/l Dist. Tubes to Shell MAWP
(a) F.H. above tubes N/A
(b) R.H. above tubes N/A
(c) F.H. below tubes N/A
(d) R.H. below tubes N/A
(e) Through stays SA-675-70 THRU. 16 @ 1-1/2" 12.94" 28.3 SQ IN N/A N/A 125W
Purpose (inlet, outlet, drain, etc.) No.
Diameter or
Size
Type How Attached Material
Nominal
Thickness
Reinforcement Material Location
Handhole 5 3" x 4" NA WELDED NA N/A N/A BOTTOM SHELL
Manhole 1 12" x 16" RING WELDED SA-106-C N/A N/A TOP SHELL
HOT WATER OUTLET 1 10" STUDDING FLG WELDED SA-105 150# N/A TOP SHELL
HOT WATER RETURN 1 8" STUDDING FLG WELDED SA-105 150# N/A TOP SHELL
DRAIN 2 2" THREADED CPLG WELDED SA-105 3000# N/A BOTTOM SHELL
AQUASTAT/SPARE 6 3/4" THREADED CPLG WELDED SA-105 3000# N/A SIDE SHELL
WATER CONTROLS/SPARE 3 1" THREADED CPLG WELDED SA-105 3000# N/A TOP SHELL
WATER CONTROLS 3 1-1/4" THREADED CPLG WELDED SA-105 3000# N/A TOP/SIDE SHELL
SAFETY VALVE/SPARE 4 2" THREADED CPLG WELDED SA-105 3000# N/A TOP SHELL
REAR ACCESS 1 24" x 9-1/2" PIPE WELDED SA-53-B ERW N/A N/A
REAR TUBESHEET
REPAD 1 5/16" PLATE WELDED SA-516-70 N/A N/A MANWAY
exe: v6.2.662423191
PKEY

(National Board commission number and endorsements)
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the boiler described in this
Manufacturer's Data Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property
damage or a loss of any kind arising from or connected with this inspection.
have compared the statements in this Manufacturer's Data Report with the described boiler and state that the parts referred to as data items
______________________________, not included in the certificate of shop inspection, have been inspected by me and that to the best of my
knowledge and belief, the manufacturer and/or the assembler has constructed and assembled this boiler in accordance with the applicable sections of
the ASME BOILER AND PRESSURE VESSEL CODE. The described boiler was inspected and subjected to a hydrostatic test of .
Form and version: H2-11
(no.) [type (saddles, legs, lugs)] [attachment (bolted or welded)]
N/A
19. Remarks
and state that, to the best of my knowledge and belief, the manufacturer has constructed this boiler in accordance with the applicable sections of the
ASME BOILER AND PRESSURE VESSEL CODE.
We certify that the statements made in this data report are correct and that all details of design, material, construction, and workmanship of this boiler conform to Section IV of the
ASME BOILER AND PRESSURE VESSEL CODE.
CERTIFICATE OF SHOP COMPLIANCE
Signed
(by representative)
Name
expires
Date 12/04/2015
(manufacturer that constructed and certified boiler)
CERTIFICATE OF SHOP INSPECTION
Signed
Date
have inspected parts of this boiler referred to as data items
12/04/2015 Commission:
(National Board commission number and endorsements)
13637A
January 6, 2018
Hurst Boiler & Welding Co., Inc.
(Authorized Inspector)
17221
We certify that the field assembly construction of all parts of this boiler conforms with the requirements of SECTION IV of the ASME BOILER AND PRESSURE VESSEL CODE.
CERTIFICATE OF FIELD ASSEMBLY COMPLIANCE
I, the undersigned, holding a valid commission issued by The National Board of Boiler and Pressure Vessel Inspectors and employed by
CERTIFICATE OF FIELD ASSEMBLY INSPECTION
SignedDate Commission
(Authorized Inspector)
FORM H-2 (BACK) NB Number 21033
16. Boiler supports 3 SADDLES WELDED
"H" Certificate of Authorization no.
Hurst Boiler & Welding Co., Inc.
Boiler constructed by at 21971 U.S. Hwy 319 North, Coolidge, Georgia, 31738
4 THRU 19
and have examined Manufacturers' Partial Data Reports for items
Signed
(by representative)
Name
expires
Date
(assembler that certified and constructed field assembly)
"H" Certificate of Authorization no.
(Code par. and/or formula) (complete boiler)
17. MAWP 125W HG-301 188 psi Based on Heating surface
(total)
1611 sq. ft. Shop hydro. test
18. Maximum water temperature 250° F
.
.
.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the boiler described in
this Manufacturer's Data Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or
property damage or a loss of any kind arising from or connected with this inspection.
OneCIS Insurance Company
I, the undersigned, holding a valid commission issued by The National Board of Boiler and Pressure Vessel Inspectors and employed by
NONE
exe: v6.2.662423191
PKEY