Husqvarna GT48XLS Owner's manual

English
581 98 18-49
Repair Parts Manual
GT48XLS / 96043016600
Please read the operator's manual carefully and make sure
you understand the instructions before using the machine.

2
HOW TO USE THIS MANUAL
This manual is designed to provide the customer with a means to identify the parts on his/her tractor when ordering repair parts. The
illustrations may or may not represent the actual assemblies; therefore, it is not recommended to use this manual as a guide to assemble
or disassemble the tractor. Some hardware and parts are drawn larger in order to more readily identify them.
Each tractor has its own model number.
The model number for your tractor can be found on the fender under the seat.
When ordering parts, always give the following information:
• Product - “TRACTOR”
• MODEL NUMBER - “GT48XLS" (96043016600)”
• Part Number
• Part Description
TABLE OF CONTENTS
SCHEMATIC .......................................................................................................................................................................3
ELECTRICAL.................................................................................................................................................................. 4-5
CHASSIS ........................................................................................................................................................................ 6-7
DRIVE.............................................................................................................................................................................. 8-9
ENGINE....................................................................................................................................................................... 10-11
STEERING .................................................................................................................................................................. 12-13
MOWER DECK ........................................................................................................................................................... 14-15
MOWER LIFT....................................................................................................................................................................16
SEAT .................................................................................................................................................................................17
DECALS............................................................................................................................................................................18

3
TRACTOR - MODEL NO. GT48XLS (96043016600), PRODUCT NO. 960 43 01-66
SCHEMATIC
SCH29
CHARGE PLUG/
INDICATOR
NON-REMOVABLE
CONNECTIONS
REMOVABLE
CONNECTIONS
WIRING INSULATED CLIPSNOTE:
IF WIRING INSULATED
CLIPS WERE REMOVED FOR
SERVICING OF UNIT, THEY
SHOULD BE RE-INSTALLED TO
PROPERLY SECURE YOUR
WIRING.
SOLENOID
IGNITION
UNIT
FUEL
LINE
FUEL SHUT-OFF
SOLENOID
(IF EQUIPPED)
REGULATOR
M
STARTER
STATOR
ENGINE
CLUTCH/BRAKE
(PEDAL UP)
PTO SWITCH
(DISENGAGED)
7
8
6
2
9
5
NO
NC
SEAT SWITCH
NO
NO
REVERSE SWITCH
(NOT IN REVERSE)
NO
M
ELECTRIC DIFFERENTIAL
ACTUATOR
M
4
1
BATTERY
FUSE
HOUR
METER
POWER OUTLET
12V
AMMETER
A
CHASSIS HARNESS
CONNECTOR
(MATING SIDE)
DASH HARNESS
CONNECTOR
6
3
52
41
6
5
4
3
2
1
(MATING SIDE)
(MATING SIDE)
8
9
2
1
6
47
54
5
6
1
2
3
ELECTRIC DIFFERENTIAL
SWITCH CONNECTOR
7
(MATING SIDE)
PTO SWITCH
BLACK
BLUE
2
5
3
1
6
4
ELECTRIC DIFFERENTIAL
SWITCH
7 LED
ELECTRIC CLUTCH
BLACK
HEADLIGHTS
CHASSIS HARNESS
JUNCTION
CONNECTOR
1
2
3
4
GRN/WHT
YEL/WHT
BLACK
6 5
BLACK RED
(OFF POSITION)
FUSE 10A
ENGINE CONNECTOR
1
2
3
4
6 5
SMART IGNTION SWITCH (S.I.S.)
-DO NOT OPEN!
-PERMANENT DAMAGE CAN RESULT
IF PROPER DIAGNOSTIC PROCEDURES
ARE NOT FOLLOWED.
-CONTACT YOUR DEALER OR AUTHORIZED
SERVICE CENTER FOR REPAIR.
SENSITIVE ELECTRONIC
COMPONENTS INSIDE!
20A
DIAGNOSTIC
3 2 1
(NOT OCCUPIED)
BLACK
RED
RED/BLKRED/BLK
BLACK
RED-11
(COLOR - PIN NUMBER)
RED-2
RED
RED
RED
GRAY-12BLACK-13
RED
BLACK
BLK/WHT-14
ORANGE-8
WHITE-10
BLACK-1
RED
1
2
1
BLACK
PURPLE
BLUE
GRN/WHT
YEL/WHT
RED
BLACK
BLACK
BLACK
BLACK
BLK/WHT
BLK/RED
ORANGE
RED
RED BLK/WHT ORANGE WHITE
BLACK
BLACK
BLUE/WHT
GRAY/WHT
GRAY/WHT-3
BLUE/WHT-6
BLACK-15
GRN/WHT-4
YEL/WHT-5
PURPLE-9
BLUE-7
BLACK
BLUE
BLACK
RED
BLACK

4
TRACTOR - MODEL NO. GT48XLS (96043016600), PRODUCT NO. 960 43 01-66
ELECTRICAL
TS02S
8
1
99
100
91
227
90
22
79 21
40
71
75
26
26
43
27
41
24
28
55
46
45
0
60
AMPS
60
25
16
42
102
105
With 12V Outlet Option
59
103
With Charge Indicator Option
142
(+) (-)
143
29
30

5
TRACTOR - MODEL NO. GT48XLS (96043016600), PRODUCT NO. 960 43 01-66
ELECTRICAL
KEY PART
NO. NO. DESCRIPTION
1 532 16 34-65 Battery
2 874 76 04-12 Bolt Hex Hd 1/4-20 unc x 3/4
8 532 18 64-91 Battery Box
16 532 17 61-38 Switch Interlock
21 532 40 02-52 Harness Socket Light
22 532 00 41-52 Bulb, Light #1156
24 581 60 63-01 Cable Battery
25 532 41 28-95 Cable Starter
26 532 17 51-58 Fuse
27 873 51 04-00 Nut Keps Hex 1/4-20 unc
28 532 14 54-91 Cable Ground 21” Blk 6 Ga.
29 581 42 93-01 Switch Seat
30 581 42 04-01 Switch Ign
34 532 19 39-35 Switch Light
40 581 70 93-01 Harness Ign. Dash
41 817 72 04-08 Screw 1/4-20 unc x 1/2
42 532 13 15-63 Cover Terminal Red
43 532 19 25-07 Solenoid
45 532 42 52-70 Ammeter Round
46 532 42 52-71 Gauge Hourmeter
50 532 17 46-51 Switch PTO
55 817 06 05-12 Screw Thdrol 5/16-18 x 3/4
59 532 40 03-03 Outlet 12-Volt
71 581 70 92-01 Harness Ign
75 580 36 64-01 Switch
79 532 17 52-42 Socket Asm. Bulb Twistlock
90 532 43 53-95 Cover Terminal Battery
91 532 19 02-70 Strap Battery
99 817 67 04-12 Screw Hexwsh Thdrol 1/4-20 x 3/4
100 819 09 14-16 Washer 9/32 x 7/8 x 16 Ga.
102 532 40 44-54 Harness Pigtail
103 532 42 17-47 Harness Pigtail 12V Outlet
105 532 40 75-68 Switch Reverse
142 583 85 78-01 Pigtail Charge Port
143 532 44 80-59 Charge Port
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm

6
TRACTOR - MODEL NO. GT48XLS (96043016600), PRODUCT NO. 960 43 01-66
CHASSIS
chassis-tex_GT HUSQ_II_140
150
130
37 194
194
161 36
36
199
162
196
221
162
58
189
189
5
176
182
176
176
175
177
178
14
202
203
205 151
206
137
137
214
204
208
15
25
207
3
297
191
18
130
130
130
176 176
350
335
234
235
236
236
183
165
2
159
159
180
217
68
228
194
228
350
336
353
361
359 365 179
353
358
357
19
356
355
353
352
351
361
354
353
361
360
362
159
159
152

7
TRACTOR - MODEL NO. GT48XLS (96043016600), PRODUCT NO. 960 43 01-66
CHASSIS
KEY PART
NO. NO. DESCRIPTION
2 580 43 44-01 Drawbar
3 532 44 44-81 Applique Husq.
5 581 67 42-01 Dash
14 532 44 11-77 Hood
15 532 43 97-33 Lens LH
18 532 43 77-62 Grille Asm
19 819 13 13-12 Washer 13/32 x 13/16 x 12 Ga.
25 532 44 33-85 Lens RH
36 817 06 05-12 Screw 5/16-18 x 3/4
37 532 44 12-08 Fender
58 532 19 43-14 Bracket Fender
68 817 49 05-08 Screw 5/16-18 x 1/2
130 532 41 63-58 Screw #10 x 0.750 BOS Thread
137 532 40 75-90 Bumper Dash
150 532 43 97-74 Duct Heat Hood
151 532 43 66-70 Bracket Pivot Hood
152 532 43 98-70 Shield Browning
159 817 00 06-12 Screw 3/8-16 x 3/4
161 532 43 99-29 Console Fuel Window
162 532 14 24-32 Screw Hex Wsh Hi-Lo 1/4 x 1/2
165 532 19 43-30 Bracket Support Tank
175 532 19 63-04 Crossmember
176 532 40 07-76 Screw 10-24 x 5/8 Wshd Qdrx
177 532 19 52-27 Bushing Steering
178 532 19 97-82 Cargo Asm. Net
179 532 16 89-37 Nut Push
180 532 44 55-59 Chassis
182 532 40 68-59 Dash Lower
183 874 52 05-20 Bolt 5/16-18 x 1-1/4
189 817 00 05-12 Screw 5/16-18 x 3/4
191 532 43 74-55 Insert Reflect. RH
194 873 90 05-00 Nut Lock Hex Flange 5/16-18
196 532 43 96-74 Console Asm. Deck Lift
199 532 19 82-59 Plate Deck Lift
202 532 43 97-28 Vent Side Hood RH NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
KEY PART
NO. NO. DESCRIPTION
203 532 43 97-27 Vent Side Hood LH
204 532 43 57-14 Vent Asm Hood Top
205 532 43 97-30 Skirt Hood Side RH
206 532 43 97-29 Skirt Hood Side LH
207 532 43 97-34 Bezel RH
208 532 43 97-35 Bezel LH
214 532 19 91-45 Clip Retainer
217 532 40 91-67 Rod Pivot
221 532 19 89-09 Reflector LH
228 532 19 51-61 Stud Fastener
234 532 40 47-42 Bumper Hood
235 532 40 61-29 Spacer Fender
236 873 93 05-00 Nut Center Lock 5/16-18 unc
297 532 43 74-56 Insert Reflect. LH
335 532 44 82-04 Cover RH Lower
336 532 44 53-09 Cover LH Lower
350 532 44 51-43 Clip X-mas Tree
351 532 42 17-34 Pin Clevis .375 x 2.125
352 532 44 86-34 Clevis .375 x 2.125
353 532 17 80-62 Clip Retainer .0375
354 532 44 86-19 Support Bellcrank
355 532 44 86-36 Bellcrank Pivot Lock Diff
356 532 44 86-93 Link Lock Diff
357 532 44 86-84 Spring Compression
358 580 36 66-01 Swivel Guide
359 580 36 62-01 Actuator Electric
360 532 44 86-18 Bracket Actuator
361 817 49 06-10 Screw Hxwsh Thdr 3/8-16 x 5/8
362 532 44 86-33 Clevis .375 x 2.42
365 532 44 73-68 Nylon Spacer .375 x .4375L
- - 532 43 18-82 Kit Guard Brush

8
TRACTOR - MODEL NO. GT48XLS (96043016600), PRODUCT NO. 960 43 01-66
DRIVE
64
188
17
161
35
184
167
160
42
221
29
159
159
15
Drive-tex_K66_pedal_14
69
116
73 69
99
2
3
33
183
116
2
7
9
33
183
169
69 3
208
210
163
125
215
153
153
166
211
211
222
80
226
225
125
196
125
125
125
79
186
189
49
187
50
51
52
51
190
185
51
52
170
56
213
221
171
70
74
220
74
197 196
160
206
26
207
209
92 125
116
43
214
284
196
282
366

9
TRACTOR - MODEL NO. GT48XLS (96043016600), PRODUCT NO. 960 43 01-66
DRIVE
KEY PART
NO. NO. DESCRIPTION
KEY PART
NO. NO. DESCRIPTION
1 – – – – – – Transaxle, Tufftorq K66ELD
(580402201) (Order parts from
transaxle manufacturer.)
2 532 00 70-70 Key 1/4 x 2.5
3 532 00 75-63 Washer Thrust Axle Hardened
7 532 19 98-37 Hub Asm. Wheel
9 532 14 00-80 Bolt Hub Wheel
15 819 13 13-16 Washer 13/32 x 13/16 x 16 Ga.
17 532 40 10-72 Spring, Brake
26 532 19 96-79 Spring Return Cruise
29 532 40 72-45 Rod, Brake
33 812 00 00-53 Ring E
35 532 43 54-86 Rod, Brake, Park
42 532 12 48-72 Cover, Foot Pedal
43 874 18 04-12 Screw Mach. CR. 1/4-20 x 3/4
49 872 11 06-14 Bolt
50 532 19 43-27 Pulley Idler Flat
51 873 90 06-00 Lock Nut 3/8-16
52 532 19 43-26 Idler V-Groove
56 532 12 59-07 V-Belt, Drive
64 532 19 78-65 Shaft Asm. Pedal Brake Control
69 532 12 38-00 Washer 1-1/32 x 1-5/8 x 16 Ga.
70 532 43 96-61 Console Asm
73 874 49 05-44 Bolt Hex Flghd 5/16-18 Gr. 5
74 532 14 24-32 Screw 1/4 x 1/2
80 532 40 71-82 Strap Torque
92 874 76 05-20 Bolt 5/16-18 x 1/2
99 532 41 57-44 Spring Bypass
116 873 90 05-00 Nut Lock Hex Flange 5/16-18
125 817 00 05-12 Screw 5/16-18 x 3/4
153 532 12 47-88 Retainer Spring
159 876 02 04-12 Pin Cotter 1/8 x 3/4
160 532 16 94-84 Retainer Clip
161 532 10 57-09 Spring, Return, Clutch
163 532 40 72-46 Rod Pedal Control
166 532 42 91-64 Nut Push .625
167 532 40 52-57 Latch Brake Parking
170 532 19 43-22 Keeper V-Idler Centerspan
171 872 11 06-16 Bolt Rd Hd Sq NK 3/8-16 unc x 2
183 532 19 73-57 Spacer Axle
184 532 44 14-55 Handle Parking Brake
185 872 11 06-22 Bolt Rdhd 3/8-16 unc x 2-3/4 G5
186 532 19 43-21 Spacer Retainer
187 819 13 32-10 Washer
188 532 19 43-23 Link Clutch Ground Drive
189 532 19 43-17 Bellcrank Ground Drive
190 532 19 43-18 Keeper Bellcrank Ground Drive
196 817 00 06-16 Screw 3/8-16 x 1
197 532 19 97-69 Bracket Clutch Anti-Rotation
206 532 44 85-96 Bracket Mount Latch Cruise
207 532 19 78-68 Latch Control Cruise
208 532 19 78-69 Gear Sector Control Cruise
209 532 19 95-92 Rod Control Cruise
210 532 19 78-60 Rocker Asm. Pedal Control
211 532 12 01-83 Bearing Nylon
213 532 40 31-19 Knob Control Cruise
214 532 41 68-63 Pedal Forward
215 532 40 17-23 Pedal Reverse
220 532 19 89-08 Reflector RH
221 532 40 31-87 Retainer Spring Clip Handle
222 879 21 20-10 Washer 21/32 x 1-1/4 x 10 Ga.
225 532 40 73-11 Keeper Belt
226 532 40 71-09 Bracket Mount Torque
282 874 49 05-48 Bolt 5/16-18 x 3.0 G5
284 532 41 76-93 Nut U-Chnl. 1/4-20
366 580 62 62-01 Bracket Reinforcement
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm

10
TRACTOR - MODEL NO. GT48XLS (96043016600), PRODUCT NO. 960 43 01-66
ENGINE








30!2+ª!22%34%2ª+)4
















ENGINETEX?BSCYL?








11
KEY PART
NO. NO. DESCRIPTION
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
For engine service and replacement parts, call the toll free
number for your engine manufacturer listed below:
Briggs & Stratton 1-800-233-3723
1 – – – – – – Engine B&S Model No.
44Q777-2406-G5(438243)
(Order parts from engine manufacturer.)
2 532 44 59-62 Muffler
9 532 19 43-20 Keeper Belt Engine
11 532 17 93-35 Clutch Electric
12 532 19 43-43 Pulley Engine
15 532 43 80-82 Tank Fuel 4R
18 532 43 92 08 Cap Asm
20 532 42 43-41 Control Throttle
21 532 41 63-58 Screw #10 x 0.750 BOS Thread
28 532 40 11-35 Fuel Line
29 532 13 71-80 Spark Arrester Kit
37 532 12 34-87 Clamp Hose
41 532 12 61-97 Washer 1-1/2 OD x 15/32 ID x .250
42 810 04 07-00 Washer Lock 7/16
45 873 51 04-00 Nut Keps Hex 1/4-20 unc
62 532 43 40-17 Shield Heat Muffler
69 532 16 53-91 Gasket
70 532 15 99-55 Tube Exhaust LH
71 532 16 05-89 Tube Exhaust RH
79 532 18 39-06 Screw Socket HD 5/16-18 x 1
84 817 06 06-20 Screw 3/8-16 x 1-1/4
85 532 17 99-53 Bolt 7/16-20 x 3.75 Gr. 5
87 532 17 18-77 Bolt 5/16-18 unc x 3/4 w/Sems
90 817 00 06-16 Screw 3/8-16 x 1
91 532 18 74-95 Bushing
116 539 13 26-24 Knob Soft Touch
117 532 42 08-28 Valve Fuel Reserve
TRACTOR - MODEL NO. GT48XLS (96043016600), PRODUCT NO. 960 43 01-66
ENGINE
Engine Power Rating Information
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive En-
gineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and
corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values
are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambient operat-
ing conditions and engine-to-engine variability. Given both the wide array of products on which engines are placed and
the variety of environmental issues applicable to operating the equipment, the gas engine will not develop the rated gross
power when used in a given piece of power equipment (actual “on-site” or net power). This difference is due to a variety
of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.),
application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability.
Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this
Series engine.

12
TRACTOR - MODEL NO. GT48XLS (96043016600), PRODUCT NO. 960 43 01-66
STEERING ASSEMBLY
55
35
19
63
60
59
58 67
54
67
78
66
54
65
61
55
2
Steering-tex_LEGND2_41
6
5
13 13
53
8
62
4
50
50
70
65
68
69
15
15
14
14
6
16
28
28
13
22
64
63
9
87
9
87
21
45
51
26
1
122
122

13
TRACTOR - MODEL NO. GT48XLS (96043016600), PRODUCT NO. 960 43 01-66
STEERING ASSEMBLY
KEY PART
NO. NO. DESCRIPTION
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
1 532 43 97-40 Wheel, Steering
2 532 19 59-68 Axle Asm., Front
4 532 40 30-89 Spindle Asm. LH
5 532 40 30-90 Spindle Asm. RH
6 532 12 49-31 Bearing, Race Thrust Harden
7 532 12 17-48 Washer 25/32 x 1-5/8 x 16 Ga.
8 812 00 00-29 Ring, Clip #T5304-75
9 532 12 12-32 Cap, Spindle
13 532 12 17-49 Washer 25/32 x 1-1/4 x 16 Ga.
14 810 04 06-00 Washer, Lock Hvy Hlcl Spr 3/8
15 873 54 06-00 Nut, Crown Lock 3/8-24 unf
16 532 40 82-19 Shaft Steering
19 532 19 47-29 Plate Steering
21 532 18 67-37 Adapter, Wheel Steering
22 532 42 05-37 Steering Support Lower
26 532 43 97-43 Insert, Wheel Steering
28 817 00 06-12 Screw 3/8-16 x 3/4
35 532 19 47-32 Gear, Sector Plate
45 819 18 38-12 Washer 9/16 x 2-3/8 x 12 Ga.
50 873 90 06-00 Nut Lock Flange 3/8-16 unc
51 873 94 08-00 Nut Hex Jam Toplock 1/2-20 unf
53 532 18 89-67 Washer Hardened .793 x 1.637 x .060
54 874 76 06-36 Bolt Hex 3/8-16 unc x 2-1/4
55 532 41 47-36 Spacer
58 532 19 47-47 Bolt Shoulder Sector Pivot CFM
59 532 19 47-48 Washer Thrust Sector Steering
60 873 97 10-00 Nut Flange Lock 5/8-11
61 532 19 47-40 Draglink, LH
62 532 19 47-41 Draglink, RH
63 817 00 05-12 Screw 5/16-18 x 3/4
64 532 19 98-49 Retainer Clip Spring Steering
65 532 19 47-34 Brace Axle Front
66 871 02 07-48 Bolt Hex Fghd 7/16-14 x 3 Serr
67 532 19 47-37 Bushing PM Front Axle
68 873 90 07-00 Nut Lock Flange 7/16-14 Gr. 5
69 532 19 91-62 Washer 1.5 x .505 x .118
70 532 19 61-97 Bracket Deck Susp. Front
78 532 05 70-79 Washer Thrust
122 532 44 49-62 Cap Gear Sector

14
TRACTOR - MODEL NO. GT48XLS (96043016600), PRODUCT NO. 960 43 01-66
MOWER DECK
3
4
5
8
9
10
12
13
14
18
19
22
23
33
27
28
29
30
31
32
33
34
35
37
38
39
41
44
45
46
50
51
52
53
54
55
57
1
2
6
7
11
15
17
20
21
36
58
60
24
25
43
24
59
40
48 _F_elec-Tex_9_r1
61 62
42
42

15
TRACTOR - MODEL NO. GT48XLS (96043016600), PRODUCT NO. 960 43 01-66
MOWER DECK
KEY PART
NO. NO. DESCRIPTION
KEY PART
NO. NO. DESCRIPTION
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
1 574 80 89-02 Deck w/Decals
2 539 11 21-70 Housing Assembly
3 532 18 76-90 Washer-Spacer
4 532 17 43-75 Pulley, Mandrel
5 532 40 02-34 Nut, 9/16 Top Center Lock
6 532 17 39-84 Screw, Washer Head
7 539 11 07-32 Discharge Chute, 48"
8 539 11 07-35 Spring - Torsion
9 539 11 07-36 Pin, Clevis 5/16 x 5.19
10 539 11 34-25 Blade, 16-1/4"
11 532 19 30-03 Bolt/Washer Asm 7/16-20
12 539 11 34-26 Confinement Plate
13 872 11 05-05 Bolt Carr. 5/16-18 x 5/8
14 873 80 05-00 Nut 5/16-18
15 532 19 51-61 Stud, Fasten w/ Anti- Rotate
17 532 19 61-04 Pulley, Idler Spec. Hub
18 574 82 71-02 Arm, Idler, Blk
19 532 17 79-68 Pulley, Idler
20 539 13 27-28 Pulley, Idler
21 575 22 45-01 Idler Bushing
22 532 13 39-57 Wheel, Gauge
23 532 19 34-06 Bolt, Shoulder
24 521 99 65-01 Nut 3/8-16 Hex Flg Nyloc
25 575 22 47-02 Shield, Belt LH
27 539 10 47-63 Retainer 5/16c U Type
28 539 10 82-71 Hcs 3/8-16 x 3-1/2 Gr 5
29 539 10 65-04 Heavy Washer
30 819 14 16-14 Washer, 3/8 Flat Std
31 539 97 69-79 Nut 3/8-16 Hex Nyloc
32 539 99 09-23 Rhsnb 3/8-16 x 1-3/4 Gr 5
33 539 10 48-64 Washer, 7/16 Flat
34 532 17 85-15 Washer, Flat Hardened
35 873 90 07-00 Nut, 7/16-14 Hex Nyloc
36 532 19 51-85 Arm, Susp., Rear
37 539 11 36-21 Sb 3/8-16 x 3/8 Skt Hd
38 819 13 13-16 Washer, 13/32 x 13/16 x 16 Ga.
39 539 20 02-82 Nut, 3/8-16 Hex Jam Nyloc
40 532 17 60-66 Nose Roller
41 532 17 91-27 Rod Roller Nose
42 532 19 42-08 Pin Cotter 5/16 Bow Tie Lock
43 819 12 14-14 Washer, 3/8 x 7/8 x 14 Ga.
44 575 96 72-02 Shield, Belt Rh
45 874 78 05-16 Hcs 5/16-18 x 1
46 810 03 05-00 Wash 5/16 Slw
50 532 41 55-98 Washout Port
51 817 49 04-08 Bolt, 1/4-20 x 1/2
52 874 78 07-40 Bolt, 7/16-14 x 2-1/2
53 574 84 56-02 Belt, Deck
54 532 14 10-43 Guard, Belt
55 539 11 55-74 Eyebolt 5/16 x 3-1/2
57 539 10 68-50 Spring
58 532 11 04-85 Ball Bearing
59 575 35 29-01 Pulley
60 532 16 94-84 Clip Retainer
61 532 40 03-37 Rod Anti-Sway
62 819 13 13-12 Washer 13/32 x 13/16 x 12 Ga.
- - 532 44 53-59 Mower Deck Complete

16
TRACTOR - MODEL NO. GT48XLS (96043016600), PRODUCT NO. 960 43 01-66
MOWER LIFT



 








LIFTTEX?





2 532 42 20-27 Shaft Asm., Lift
3 532 19 52-30 Lever Asm., Lift RH
7 580 96 23-01 Grip, Lever
10 532 19 63-14 Spring Torsion
41 532 17 59-94 Nut Lift Link
87 532 19 42-09 Pin Cotter 7/16 Bow Tie Lock
88 532 19 53-04 Spring Lift Assist
89 819 19 19-12 Washer Clear Zinc
KEY PART
NO. NO. DESCRIPTION
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
KEY PART
NO. NO. DESCRIPTION
91 532 40 34-07 Link Lift Susp Mower Rear
96 532 19 52-63 Bushing Spherical
97 817 00 06-12 Screw 3/8-16 x .75
98 574 82 25-01 Link Lift Susp. Front Mower
114 873 36 07-00 Nut Jam 7/16-20

17
TRACTOR - MODEL NO. GT48XLS (96043016600), PRODUCT NO. 960 43 01-66
SEAT ASSEMBLY
1 532 44 32-63 Seat
2 532 18 01-66 Bracket Pivot Fender
3 532 14 06-75 Strap, Asm Fender
6 873 80 06-00 Nut, Lock w/Ins. 3/8-16 unc
7 532 12 41-81 Spring, Seat Cprsn
8 532 17 18-77 Bolt 5/16-18 unc x 3/4 w/Sems
10 532 19 69-77 Pan, Seat
21 532 17 18-52 Bolt, Shoulder 5/16-18
37 873 80 05-00 Nut, Lock 5/16-18 unc
40 532 43 98-71 Handle Slide Seat
41 532 19 82-00 Spring Latch Seat
43 874 76 06-12 Bolt Fin Hex 3/8-16 unc x 3/4
44 819 13 38-12 Washer 13/32 x 2-3/8 x 12 Ga.
KEY PART
NO. NO. DESCRIPTION
KEY PART
NO. NO. DESCRIPTION
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
2
6
1
40
10
37
37
21
21
3
41
7
8
7
8
seat-tex_6.5SL_3
44
43
8
8
6

18
TRACTOR - MODEL NO. GT48XLS (96043016600), PRODUCT NO. 960 43 01-66
DECALS
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
KEY PART
NO. NO. DESCRIPTION
6
2
1
3
11
4
10
5
9
8
7
wheel_art_1-vgt
WHEELS AND TIRES
KEY PART
NO. NO. DESCRIPTION
KEY PART
NO. NO. DESCRIPTION
1 532 05 91-92 Cap, Valve, Tire
2 532 06 51-39 Stem, Valve
3 532 18 18-39 Rim Assembly, Front
4 532 00 81-34 Tube, Front (Service Item Only)
5 532 16 10-24 Tire, Front
6 532 12 49-57 Fitting, Grease (Front Wheel Only)
7 532 12 49-59 Bearing, Flange (Front Wheel Only)
8 532 17 50-39 Cap, Axle
9 532 17 04-53 Tire, Rear
10 532 00 71-54 Tube, Rear (Service Item Only)
11 532 14 45-10 Rim Assembly, Rear
- - 532 14 43-34 Sealant, Tire (10 oz. Tube)
1 583 83 44-01 Decal, Operator’s
2 581 72 43-01 Decal, No Step
3 581 58 00-02 Decal, Mower Schematic
4 581 72 44-01 Decal, Warning
5 581 72 42-01 Decal, Warning Reserve
6 532 43 29-18 Decal, Eng. H.P.
7 532 41 86-00 Decal, Pedal
8 532 44 81-21 Decal, HV
9 532 14 50-05 Decal, Battery Dnge/Poi
14 581 54 37-01 Decal, Panel Side
15 532 42 38-29 Decal, Cust. Resp.
16 581 62 73-01 Decal, Hood Logo
17 581 98 10-01 Decal, Replacement
- - 581 72 48-01 Decal, Bypass
- - 532 43 98-82 Pad, Footrest, LH
- - 532 43 98-81 Pad, Footrest, RH
- - 581 98 17-49 Manual, Operator’s (English)
- - 581 98 18-49 Manual, Parts (English)
17
16 16
14
7
1
14
9
6
15
5
2
3
8
4

19
NOTES/AVISO

01/04/2013 AP