Husqvarna H2201-18 User manual

1
11
User Guide
Save for future reference
18" EVOLUTION
Easy-Push Reel Mower
with Adjustable Grass Management System
Model Number: H2201-18
Para ver la versión en español, dé vuelta al guía de usuario

2
2
Fill in the following information and save:
Date of Purchase: _______________________
Retailer: _______________________________
FOUR YEAR LIMITED WARRANTY
For four (4) years starting after the date of purchase, Husqvarna warrants to the original purchaser that its Lawn Mower products are free from serious defects
in materials and workmanship appearing under normal use. This warranty does not cover damage to the Lawn Mower caused by abuse, acts of God, failure to
follow product instructions, mishandling or unauthorized repair by either the purchaser or an unauthorized third party. THIS WARRANTY IS IN LIEU OF ALL
OTHER EXPRESS WARRANTIES; AND ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS WARRANTY. IN NO EVENT WILL
Husqvarna BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow limitations on how long an implied warranty
lasts and/or the exclusion or limitation of incidental or consequential damages, so the above limitation and/or the above exclusion may not apply to you. This
warranty gives you specific legal rights, and you may also have other rights which vary from state to state. As its sole responsibility and your sole remedy for
any warranted defect, Husqvarna will replace any defective part of the Lawn Mower, containing a warranted defect, free of charge, with proof of purchase and
notification within a reasonable period of time (but no longer than 6 months) following the discovery of such defect. Any
non-residential use of this product
voids all warranty. For warranty service, email [e-mail] or call 1-800-918-8290.
If you need assistance or have questions,
don’t return to the store.
Call our customer service at 1-800-918-8290
Visit us at www.Husqvarnareelmower.com
18 in. EVOLUTION
Easy-Push Reel Mower
with Adjustable Grass Management System
Model Number: H2201-18

3
33
Warranty …………………………………………………............................
Getting Started…………………………………………………….…….……
Safety Information..…………………………….…………………….………
Product Features…….……………………...…………………….….………
Main Operating Parts….……………………………………………..………
Handle Assembly………….….…...………………………..….……..……..
Attaching the Handle……………….…….……………………….…………
Attaching the Grass Bag………………....……………………….…………
Grass Management System.…….………………………..……..…………
One-Touch Height Adjust…...…………………………….….….…………
Checking Cutting Blades………………….…………………….…............
Adjusting the Blade…………………………………………......................
Checking Cutting Performance………………..……………………………
Tips for Mowing Correctly…..……….….…...…………….………..….…..
Care and Maintenance…………………..….………………..…................
Troubleshooting……………...………………………………...….…….......
Parts List……………...………………………………...….…….................
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18
20
Contents
Getting Started:
1. Read User Guide
Please carefully read the entire user guide and fully understand the safety
information before assembling or using the mower. Use this guide to
familiarize yourself with the mower, how to adjust it, and correct usage for
best results.
2. Tool-less assembly
Turn to page 7 and follow instructions for assembly of the Handle and
attachment of the Grass Bag.
3. Check cutting blade performance
Check cutting performance by mowing your lawn. If you have any issues,
turn to page 12 and follow instructions to confirm proper setting of the
cutting blades
Getting Started

4
44
Do not use mower if you are in poor health.
Use the mower only for its intended purpose.
Do not use mower in areas other than grass.
Check mower before each use. Do not operate with missing, worn, or damaged
parts.
Inspect your lawn for any debris or foreign objects (such as stones, twigs, pieces
of wood, and wires) and remove them before mowing. Solid objects that contact
the cutting blades could be thrown out uncontrollably.
Always wear safety glasses, gloves, and closed-toe shoes when operating and
maintaining your mower.
Do not operate the mower while barefoot or wearing sandals or flip flops.
Never place hands, fingers, or feet in the rotating blades. When the blades are
spinning, they will cut.
Never mow when the grass is wet enough to be slippery and unsafe.
Use safe lifting practices when moving your mower.
Do not allow children under 12 years to use mower.
Do not operate around children, other people, or pets.
Walk slowly, never run while using your mower. Always be sure of your footing
when using the reel mower, especially on damp grass or on uneven surfaces.
Keep packaging material such as plastic bags out of the reach of children!
Protect the mower against weather conditions (humidity, frost).
Make sure your mower is in safe operating condition by following the tips outlined
in this user guide. Do not use this mower if it becomes damaged. Have it
repaired first.
Call 1-800-918-8290 or visit www.Husqvarnareelmower.com for troubleshooting,
frequently asked questions, and for finding a qualified repair service.
WARNING Safety Information
Safety Information
Please carefully read the entire user guide
and fully understand the safety information
before assembling or using the mower.
Use this guide to familiarize yourself with
the mower, how to adjust it, and correct
usage for best results.
If you need assistance or have questions,
Call our customer service at 1-800-918-8290
Visit us at www.Husqvarnareelmower.com
!

5
5
Easy Push Cutting System
1) Much easier to use
2) Maintains higher blade speeds with less effort
3) Blades stay sharp - no seasonal sharpening required
One Touch Height Adjustment
Adjusts cutting height with one quick and easy motion
and keeps hands away from the blades
Greater Height Range
Best-in-class cutting height adjustment from 1-in to 4-in
for a better cut during the wet season when grass gets
long quickly
Faster Blade Speed
Through re-designed gearing for better cutting in all
conditions
Pivot-Turn Design
Lets users control the mower like a
power mower with a push-down-and-
pivot movement for easier turns
Grass Management System
The oversized Grass Bag plus the Grass Deflector
(Patents Pending) allow for the greatest control over
grass clippings of any reel mower during both collecting
and mulching modes.
Tool-less Assembly
Product Features
Product Features
Fixed Handle Height
Keeps the handle at a comfortable ergonomic
height, independent of cutting height adjustment

6
6
Front wheels (2)
Rear wheels (2)
Grass Bag
Grass
Deflector
Top Cover
Middle Brace
Grass Bag Handle
Handle Cover
Handle Knobs (2)
Handle Grip
Handle Frame
Height Adjustment Knob
(1-in to 4-in cut height adjustment)
Stationary Blade
Cutting Reel
(with 5 helical cutting blades)
Left Side Cover
Right Side Cover
Grass Bag Mount
Right
Grass Bag Mount Left
Actual product may vary
Main Components
Main Components

7
7
① There are no tools required for assembly of the handle.
② Note that the Upper Handle (A) is already factory pre-assembled with the
Center Handle (B), the Handle Cover (C), and the Handle Bolts (D).
③ Lay out the parts as shown below. Note the Lower Handle parts (E) are
symmetric, and there is no right or left version.
④ In order to install the Lower Handle parts (E) into the Center Handle (B),
you must first remove the Handle Cover (C) by flexing the plastic Snap
Arms (F) outward and pulling the Handle Cover (C) upward. (See inset
image)
⑤ Next, remove the Lower Handle Bolt (D) by loosening the Handle Knob
(G). Be sure to keep the Handle Washer (H).
⑥ Insert the free ends of the Lower Handles (E) into the Center Handle (B),
making sure that they are resting flat on the ground. Align the holes in the
position that is most comfortable for usage.
⑦ Insert the Lower Handle Bolt (D) through the Center Handle (B) and
through the Lower Handles (E).
⑧ Once the threaded portion of the Lower Handle Bolt (D) is sticking
through the tubing fully, assemble the Handle Washer (G) and then
screw on the Handle Knob (F).
⑨ Using the knob, tighten the bolt until it is snug. Do not over tighten or
permanent damage to the handle may result.
⑩ Snap the Handle Cover (C) over the Center Handle (B).
Upper Handle (A)
Handle Knob (G)
Center Handle (B)
Handle Washer (H)
Handle Cover (C)
Lower Handle Bolt (D)
Lower Handles (E)
Snap Arms (F)
Handle Assembly
Handle Assembly (first time use)
Note: There are multiple positions for handle height. If uncertain, start in
the lowest handle height position and adjust to a height that is the most
comfortable for you. Both bolts locations can adjust height of handle.

8
8
① Once the handle components are fully assembled, the next step is to attach the handle to the mower. Do not install the Grass Bag yet.
Raise mower to highest setting.
② Note the attachment pegs on the inside facing surfaces of the main mower body. Shown in the inset as (I). These are easiest to see and
connect to when the mower’s cutting height is set to the 4 in. position.
③ While gripping the handle by the Lower Handle tubes shown as position (J) and (K), squeeze these two areas inward and hook the holes
in the ends of the tubes onto the attachment pegs from the main mower body (I).
④ Stop squeezing inward, and allow the handle assembly to relax.
⑤ If the handle is rotated upward fully, it is in its storage position. When rotated downward, it will stop at its usage position.
⑥ Test the height of the usage position. There are multiple height positions for the Handle. See page 7 for adjustment instructions.
⑦ To remove the handle, squeeze areas (J) and (K) inward and unhook from the attachment pegs (I).
⑧ Insert the handle retention pins on each side (L).
Attachment
Peg (I)
(J)
(K)
Attaching the Handle
Attaching the Handle
Handle
Retention
Pin (L)

9
9
① Once the handle is attached to the mower, rotate it fully upward to its storage position.
② Position the Grass Bag as shown in the figure below.
③ Note the attachment slots on the mower inside of the rear wheels on both ends (L).
④ The attachment rods on the Grass Bag are also on both ends. The right side is shown
as (M).
⑤ Insert the Grass Bag attachment rods into the attachment slots on the mower.
⑥ Rotate the Handle downward to its usage position and it is ready to use.
(L)
Handle in Storage Position
Attaching the Grass Bag
Attaching the Grass Bag
(L)
(L)
(M)

10
10
① The Grass Management System consists of the Grass Deflector (Patents
Pending), an oversized Grass Bag, and our One-Touch Height Adjustment
from 1 to 4 inches. These provide the greatest control over grass clippings of
any reel mower.
② There are 2 modes of usage: Grass Collecting and Mulching. During the dry
parts of the season, mulching is recommended to help maintain moisture in
your lawn. During the peak parts of your season when grass is growing the
fastest, multiple grass collecting passes are recommended.
③ When collecting the grass clippings, attach the Grass Bag and position the
Grass Deflector upward so the grass clippings are directed toward the back of
the Grass Bag.
④ Depending on the height setting for the mower (from 1 to 4 inches), the Grass
Deflector’s position will need to change slightly to always be directing the
grass clippings toward the back of the Grass Bag.
⑤ The Grass Deflector also prevents the grass clippings from “spraying” upward
to the sides of the mower and back at the user.
⑥ To redirect the Grass Deflector (only when the cutting reel is not rotating), pull
downward or upward holding onto the middle grip area to change its position.
⑦ When mulching, remove the Grass Bag, and set the Grass Deflector to its
lowest position.
⑧ With the Grass Deflector set at its lowest position, the grass clippings will be
directed back down to the lawn rather than “spraying” upward like most reel
mowers.
⑨ When mulching, it is recommended to only cut about 1 inch or less of the
grass height in order to receive the maximum mulching benefit from the
smaller grass clippings which will help your lawn maintain moisture and help
support a healthy root system acting as fertilizer for the lawn.
Grass Mulching Mode
Position the Grass Deflector
fully down to direct grass back
down to the lawn
Grass Management System
Using the Grass Management System
Note: Leaving behind excess grass clippings that are too long can stress the lawn
leaving it susceptible to weeds, disease, and poor appearance.
See additional tips for mowing on page 15.
Grass Collecting Mode
Position the Grass Deflector as
needed to direct grass toward the
back of the Grass Bag