3
ROTARY LAWN MOWER - - MODEL NUMBER J55S (96121000704) PRODUCT NUMBER 961 21 00-07
KEY PART
NO. NO. DESCRIPTION
1 532 41 60-58 Upper Handle
2 532 14 92-93 Engine Zone Control Cable
5 532 06 64-26 Wire Tie
6 532 41 66-68 Handle Knob
8 532 19 05-27 Control Bar
9 532 19 58-00 Support Bracket, Handle, LH
10 532 17 09-75 Handle Bracket Assembly, RH
11 532 19 57-99 Support Bracket, Handle, RH
12 532 17 09-77 Handle Bracket Assembly, LH
14 532 14 97-41 Screw, Thread Cutting 5/16-18 x 3/4
18 532 13 20-04 Locknut, Keps
19 532 19 47-88 Rope Guide
20 532 15 41-47 Foot Guard
24 532 06 91-80 Nut, Hex
25 532 40 91-48 Locknut, Hex 3/18-16
27 532 41 08-31 Wheel & Tire Assembly, Rear
28 532 14 27-48 Shoulder Bolt
29 532 40 16-30 Curved Washer
30 532 40 78-71 Axle Arm Assembly
31 532 13 28-00 Knob, Selector
32 532 41 05-95 Spring, Selector
33 532 19 60-10 Discharge Guard
34 532 40 16-29 Spacer
35 532 41 08-07 Bracket, Wheel Adjuster
36 532 15 41-32 Bracket, Housing
38 532 19 60-11 Deflector, Discharge
41 532 15 04-06 Screw, Hex Head, Threaded, Rolled 3/8-16 x 1-1/8
42 532 15 21-24 Spring, Torsion
43 873 80 04-00 Locknut, Hex
44 532 40 06-60 Kit, Mower Housing (Includes Key Number 52)
45 532 14 72-86 Rod, Hinge
KEY PART
NO. NO. DESCRIPTION
46 532 18 91-79 Blade Adapter / Pulley
47 532 19 93-79 Blade, 22"
48 532 85 10-74 Washer, Hardened
49 532 85 02-63 Washer, Lock, Helical
50 532 85 10-84 Screw, Hex Head 3/8-24 x 1-3/8 (Grade 8)
52 532 18 21-66 Decal, Danger
54 532 08 83-48 Washer, Flat 3/8
55 532 19 09-39 Mounting Bracket, Debris Shield
56 532 08 58-25 Screw, Hex Washer Head #10-24 x 1/2
57 532 05 17-93 Hairpin Cotter
58 532 41 66-67 Lower Handle
59 532 19 17-30 Locknut, Hex 1/4-20
61 532 75 15-92 Locknut, Hex
62 532 40 58-43 Debris Shield
63 532 19 23-25 Screw, Debris Shield
64 - - - Engine, Briggs & Stratton, Model Number
124T02 (Order parts from engine manufacturer)
67 532 19 74-80 O-Ring
68 532 70 04-17 Control Throttle
69 532 18 33-65 Screw Hex 1/4 x 20 x 2.17
70 532 11 11-90 B&S Cable Clamp (#213146)
71 532 08 38-16 Screw #10 x 5/8
72 532 19 79-91 Clip, Cable
74 532 16 42-65 Handle Grip
75 532 19 92-55 Stud
76 532 75 11-53 Nut, Hex
- - 532 18 21-34 Warning Decal (not shown)
- - 532 41 13-39 Operator’s Manual, European
- - 532 41 13-40 Operator’s Manual, Scandinavian
- - 532 41 13-41 Operator’s Manual, East Bloc
- - 532 41 13-42 Operator’s Manual, Baltic
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your lawn mower and void your warranty.
