Husqvarna 701 Enduro LR User manual

OWNER'S MANUAL 2020
701 Enduro LR
Art. no. 3402403en

DEAR HUSQVARNA MOTORCYCLES CUSTOMER
*3402403en*
3402403en
01/2020
DEAR HUSQVARNA MOT ORCYCLES CUSTOMER
Congratulations on your decision to purchase a Husqvarna motorcycle. You are now the owner of a state-of-
the-art sports vehicle that will continue giving you pleasure for a long time if you maintain it properly.
We wish you good and safe riding at all times!
Enter the serial numbers of your vehicle below.
Vehicle identification number ( p. 24) Dealer's stamp
Engine number ( p. 26)
Key number ( p. 26)
The Owner's Manual contained the latest information for this model series at the time of going to print. How-
ever, minor differences due to further developments in design cannot be ruled out completely.
All specifications contained herein are non-binding. Husqvarna Motorcycles GmbH specifically reserves the
right to modify or delete technical specifications, prices, colors, forms, materials, services, designs, equipment,
etc., without prior notice and without specifying reasons, to adapt these to local conditions, as well as to stop
production of a particular model without prior notice. Husqvarna Motorcycles accepts no liability for delivery
options, deviations from illustrations and descriptions, as well as misprints and other errors. The models por-
trayed partly contain special equipment that does not belong to the regular scope of supply.
© 2020 Husqvarna Motorcycles GmbH, Mattighofen Austria
All rights reserved

DEAR HUSQVARNA MOTORCYCLES CUSTOMER
2
Reproduction, even in part, as well as copying of all kinds, is permitted only with the express written permission
of the copyright owner.
ISO 9001(12 100 6061)
Husqvarna Motorcycles applies quality assurance processes that lead to the highest possible
product quality as defined in the ISO 9001 international quality management standard.
Issued by: TÜV-Management Service
Husqvarna Motorcycles GmbH
Stallhofnerstraße 3
5230 Mattighofen, Austria
This document is valid for the following models:
701 Enduro LR EU (F2603T2)

TABLE OF CONTENTS
3
TABLE OF CONTENTS
1 MEANS OF REPRESENTATION........................ 9
1.1 Symbols used ....................................... 9
1.2 Formats used...................................... 10
2 SAFETY ADVICE ............................................. 11
2.1 Use definition –intended use ............. 11
2.2 Misuse................................................. 11
2.3 Safety advice ...................................... 11
2.4 Degrees of risk and symbols .............. 12
2.5 Tampering warning ............................. 13
2.6 Safe operation..................................... 14
2.7 Protective clothing.............................. 15
2.8 Work rules........................................... 15
2.9 Environment........................................ 16
2.10 Owner's Manual.................................. 16
3 IMPORTANT NOTES....................................... 17
3.1 Manufacturer and implied warranty.... 17
3.2 Fuel, auxiliary substances................... 17
3.3 Spare parts, accessories .................... 17
3.4 Service ................................................ 18
3.5 Figures ................................................ 18
3.6 Customer service................................ 19
4 VIEW OF VEHICLE .......................................... 20
4.1 View of vehicle, front left (example) .... 20
4.2 View of vehicle, rear right
(example)............................................. 22
5 SERIAL NUMBERS.......................................... 24
5.1 Vehicle identification number.............. 24
5.2 Type label............................................ 25
5.3 Key number......................................... 26
5.4 Engine number.................................... 26
5.5 Fork part number ................................ 27
5.6 Shock absorber article number .......... 27
6 CONTROLS ..................................................... 28
6.1 Clutch lever......................................... 28
6.2 Hand brake lever................................. 28
6.3 Throttle grip......................................... 29
6.4 Horn button......................................... 29
6.5 Light switch......................................... 30
6.6 Turn signal switch............................... 30
6.7 Emergency OFF switch....................... 31
6.8 Start button......................................... 32
6.9 Combination switch ............................ 32
6.10 Ignition and steering lock.................... 34

TABLE OF CONTENTS
4
6.11 Overview of indicator lamps ............... 35
6.12 Fuel pump switch................................ 36
6.13 Fuel tank ............................................. 36
6.14 Opening fuel tank filler caps ............... 38
6.15 Closing fuel tank filler caps................. 40
6.16 Fuel cocks........................................... 41
6.17 Seat unlocking .................................... 41
6.18 Grab handles ...................................... 42
6.19 Passenger foot pegs........................... 42
6.20 Shift lever ............................................ 43
6.21 Foot brake lever.................................. 44
6.22 Side stand........................................... 44
7 COMBINATION INSTRUMENT ....................... 46
7.1 Overview ............................................. 46
7.2 Activation ............................................ 46
7.3 Messages on the combination
instrument........................................... 47
7.4 Setting the combination instrument.... 47
7.5 Setting the kilometers or miles ........... 50
7.6 Setting the clock................................. 51
7.7 Setting the service display.................. 52
7.8 Speed, time, and DST distance 1....... 53
7.9 Speed, time, and DST2 distance 2..... 55
7.10 AVG average speed, ART operating
hours, and ODO total distance
covered ............................................... 56
8 PREPARING FOR USE.................................... 57
8.1 Advice on preparing for first use......... 57
8.2 Running in the engine ......................... 59
8.3 Loading the vehicle............................. 60
9 RIDING INSTRUCTIONS ................................. 63
9.1 Checks and maintenance measures
when preparing for use....................... 63
9.2 Starting the vehicle ............................. 64
9.3 Starting off .......................................... 67
9.4 Shifting, riding..................................... 67
9.5 Applying the brakes............................ 72
9.6 Stopping, parking ............................... 74
9.7 Transport............................................. 76
9.8 Refueling............................................. 77
10 SERVICE SCHEDULE...................................... 80
10.1 Additional information......................... 80
10.2 Required work..................................... 80
10.3 Recommended work........................... 83

TABLE OF CONTENTS
5
11 TUNING THE CHASSIS................................... 84
11.1 Fork/shock absorber........................... 84
11.2 Adjusting the compression damping
of the fork............................................ 84
11.3 Adjusting the rebound damping of
the fork................................................ 86
11.4 Compression damping of the shock
absorber.............................................. 87
11.5 Adjusting the low-speed
compression damping of the shock
absorber.............................................. 88
11.6 Adjusting the high-speed
compression damping of the shock
absorber.............................................. 89
11.7 Adjusting the rebound damping of
the shock absorber............................. 91
11.8 Measuring the rear wheel dimension
unloaded ............................................. 92
11.9 Checking the static sag of the
shock absorber................................... 93
11.10 Checking the riding sag of the
shock absorber................................... 94
11.11 Adjusting the spring preload of the
shock absorber ............................... 95
11.12 Adjusting the riding sag .................. 97
11.13 Handlebar position.............................. 98
11.14 Adjusting the handlebar position .... 99
12 SERVICE WORK ON THE CHASSIS ............. 102
12.1 Raising the motorcycle with a lift
stand ................................................. 102
12.2 Removing the motorcycle from the
lift stand ............................................ 102
12.3 Bleeding the fork legs....................... 103
12.4 Cleaning the dust boots of the fork
legs ................................................... 104
12.5 Removing the fork protector............. 106
12.6 Installing the fork protector............... 106
12.7 Checking steering head bearing
play ................................................... 107
12.8 Adjusting the steering head
bearing play .................................. 108
12.9 Removing the seat............................ 110
12.10 Mounting the seat............................. 110
12.11 Removing front fender ...................... 111
12.12 Installing front fender ........................ 112
12.13 Checking the chain for dirt................ 113
12.14 Cleaning the chain ............................ 113
12.15 Checking the chain tension .............. 115
12.16 Adjusting the chain tension............... 117

TABLE OF CONTENTS
6
12.17 Checking the chain, rear sprocket,
engine sprocket, and chain guide..... 119
12.18 Adjusting the chain guide ............. 124
12.19 Adjusting the basic position of the
clutch lever........................................ 125
12.20 Checking/correcting the fluid level
of the hydraulic clutch ...................... 126
12.21 Removing engine guard.................... 128
12.22 Installing the engine guard................ 129
13 BRAKE SYSTEM ........................................... 130
13.1 Anti-lock braking system (ABS) ........ 130
13.2 Adjusting the basic position of the
hand brake lever ............................... 133
13.3 Checking the brake discs ................. 133
13.4 Checking the front brake fluid
level................................................... 135
13.5 Adding front brake fluid ................ 136
13.6 Checking the front brake linings....... 139
13.7 Changing the front brake
linings ............................................ 140
13.8 Checking the free travel of foot
brake lever ........................................ 144
13.9 Adjusting the basic position of the
foot brake lever ............................. 145
13.10 Checking the rear brake fluid level ... 147
13.11 Adding rear brake fluid .................. 148
13.12 Checking the rear brake linings ........ 150
13.13 Changing the rear brake linings .... 151
14 WHEELS, TIRES............................................ 156
14.1 Removing the front wheel ............. 156
14.2 Installing the front wheel ............... 158
14.3 Removing the rear wheel .............. 160
14.4 Installing the rear wheel ................ 161
14.5 Checking the rear hub damping
rubber pieces ................................ 164
14.6 Checking the tire condition............... 167
14.7 Checking tire pressure...................... 169
14.8 Checking spoke tension ................... 171
14.9 Using tire repair spray....................... 173
15 ELECTRICAL SYSTEM.................................. 174
15.1 Removing the 12-V battery ........... 174
15.2 Installing the 12-V battery ............. 177
15.3 Charging the 12-V battery ............. 179
15.4 Changing the main fuse.................... 181
15.5 Changing the ABS fuses................... 184
15.6 Changing the fuses of individual
power consumers ............................. 188

TABLE OF CONTENTS
7
15.7 Removing the headlight mask with
the headlight ..................................... 192
15.8 Installing the headlight mask with
the headlight ..................................... 193
15.9 Changing the headlight bulb............. 194
15.10 Changing the position light lamp...... 196
15.11 Checking the headlight setting ......... 197
15.12 Adjusting the headlight range........... 198
15.13 ACC1 and ACC2............................... 199
15.14 Diagnostics connector...................... 199
16 COOLING SYSTEM....................................... 200
16.1 Cooling system ................................. 200
16.2 Checking the antifreeze and
coolant level...................................... 201
16.3 Checking the coolant level................ 203
16.4 Draining the coolant ...................... 205
16.5 Filling/bleeding the cooling
system ........................................... 207
16.6 Changing the coolant .................... 209
17 TUNING THE ENGINE................................... 213
17.1 Changing the riding mode ................ 213
17.2 Adjusting traction control.................. 214
17.3 Checking the basic position of the
shift lever........................................... 215
17.4 Adjusting the basic position of the
shift lever ....................................... 216
18 SERVICE WORK ON THE ENGINE ............... 217
18.1 Changing the fuel screen .............. 217
18.2 Checking the engine oil level ............ 219
18.3 Changing the engine oil and oil
filter, cleaning the oil screens ....... 220
18.4 Adding engine oil .............................. 228
19 CLEANING, CARE......................................... 231
19.1 Cleaning the motorcycle................... 231
19.2 Checks and maintenance steps for
winter operation................................ 234
20 STORAGE...................................................... 236
20.1 Storage ............................................. 236
20.2 Preparing for use after storage......... 238
21 TROUBLESHOOTING ................................... 239
22 TECHNICAL DATA ........................................ 243
22.1 Engine ............................................... 243
22.2 Engine tightening torques................. 245

TABLE OF CONTENTS
8
22.3 Capacities ......................................... 251
22.3.1 Engine oil...................................... 251
22.3.2 Coolant......................................... 251
22.3.3 Fuel............................................... 251
22.4 Chassis ............................................. 252
22.5 Electrical system............................... 254
22.6 Tires .................................................. 255
22.7 Fork................................................... 255
22.8 Shock absorber ................................ 256
22.9 Chassis tightening torques ............... 258
23 SUBSTANCES............................................... 266
24 AUXILIARY SUBSTANCES............................ 269
25 STANDARDS ................................................. 271
26 INDEX OF SPECIAL TERMS ......................... 272
27 LIST OF ABBREVIATIONS ............................ 273
28 LIST OF SYMBOLS ....................................... 274
28.1 Red symbols ..................................... 274
28.2 Yellow and orange symbols.............. 274
28.3 Green and blue symbols................... 275
INDEX .................................................................... 276

MEANS OF REPRESENTATION 1
9
1.1 Symbols used
The meaning of specific symbols is described below.
Indicates an expected reaction (e.g. of a work step or a function).
Indicates an unexpected reaction (e.g. of a work step or a function).
All work marked with this symbol requires specialist knowledge and technical understanding.
In the interests of your own safety, have these jobs performed by an authorized Husqvarna
Motorcycles workshop. There, your motorcycle will be optimally cared for by specially trained
experts using the specialist tools required.
Indicates a page reference (more information is provided on the specified page).
Indicates information with more details or tips.
Indicates the result of a testing step.

1 MEANS OF REPRESENTATION
10
Indicates a voltage measurement.
Indicates a current measurement.
Indicates the end of an activity, including potential rework.
1.2 Formats used
The typographical formats used in this document are explained below.
Proprietary name Indicates a proprietary name.
Name®Indicates a protected name.
Brand™ Indicates a brand available on the open market.
Underlined terms Refer to technical details of the vehicle or indicate technical terms, which
are explained in the glossary.

SAFETY ADVICE 2
11
2.1 Use definition –intended use
The vehicle is designed and constructed to withstand the usual demands of regular traffic and use on gentle
terrain (unpaved roads).
This vehicle is not suitable for use on race tracks.
Info
This vehicle is only authorized for operation on public roads in its homologated version.
When used in a dusty environment, it may be necessary to use air filter protection. Your authorized
Husqvarna Motorcycles dealer will be glad to advise you.
2.2 Misuse
The vehicle must only be used as intended.
Dangers can arise for people, property and the environment through use not as intended.
Any use of the vehicle beyond the intended and defined use constitutes misuse.
Misuse also includes the use of operating and auxiliary fluids which do not meet the required specification for
the respective use.
2.3 Safety advice
A number of safety instructions need to be followed to operate the product described safely. Therefore read
this instruction and all further instructions included carefully. The safety instructions are highlighted in the text
and are referred to at the relevant passages.

2 SAFETY ADVICE
12
Info
Various information and warning labels are attached in prominent locations on the product described.
Do not remove any information or warning labels. If they are missing, you or others may not recognize
dangers and may therefore be injured.
2.4 Degrees of risk and symbols
Danger
Identifies a danger that will immediately and invariably lead to fatal or serious permanent injury if the
appropriate measures are not taken.
Warning
Identifies a danger that is likely to lead to fatal or serious injury if the appropriate measures are not
taken.
Caution
Identifies a danger that may lead to minor injuries if the appropriate measures are not taken.
Note
Identifies a danger that will lead to considerable machine and material damage if the appropriate measures are
not taken.
Note
Indicates a danger that will lead to environmental damage if the appropriate measures are not taken.

SAFETY ADVICE 2
13
2.5 Tampering warning
Tampering with the noise control system is prohibited. Federal law prohibits the following acts or the causing
thereof:
1 The removal or rendering inoperative by any person other than for purposes of servicing, repair, or replace-
ment, of any device or element of design incorporated into any new vehicle for the purpose of noise control
prior to its sale or delivery to the ultimate purchaser or while it is in use, or
2 the use of the vehicle after such device or element of design has been removed or rendered inoperative by
any person.
Among those acts presumed to constitute tampering are the acts listed below:
1 Removal or puncturing of the main silencers, baffles, header pipes or any other components which conduct
exhaust gases.
2 Removal or puncturing of parts of the intake system.
3 Lack of proper maintenance.
4 Replacing moving parts of the vehicle, or parts of the exhaust system or intake system, with parts other
than those specified by the manufacturer.

2 SAFETY ADVICE
14
2.6 Safe operation
Danger
Danger of accidents A rider who is not fit to ride poses a danger to him or herself and others.
–Do not operate the vehicle if you are not fit to ride due to alcohol, drugs or medication.
–Do not operate the vehicle if you are physically or mentally impaired.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result in unconsciousness and
death.
–Always make sure there is sufficient ventilation when running the engine.
–Use effective exhaust extraction when starting or running the engine in an enclosed space.
Warning
Danger of burns Some vehicle components become very hot when the vehicle is operated.
–Do not touch any parts such as the exhaust system, radiator, engine, shock absorber, or brake sys-
tem before the vehicle parts have cooled down.
–Let the vehicle parts cool down before you perform any work on the vehicle.
Only operate the vehicle when it is in perfect technical condition, in accordance with its intended use, and in a
safe and environmentally compatible manner.
An appropriate driver's license is needed to ride the vehicle on public roads.
Have malfunctions that impair safety promptly eliminated by an authorized Husqvarna Motorcycles workshop.
Adhere to the information and warning labels on the vehicle.

SAFETY ADVICE 2
15
2.7 Protective clothing
Warning
Risk of injury Missing or poor protective clothing presents an increased safety risk.
–Wear appropriate protective clothing such as helmet, boots, gloves as well as trousers and a jacket
with protectors on all rides.
–Always wear protective clothing that is in good condition and meets the legal regulations.
In the interest of your own safety, Husqvarna Motorcycles recommends that you only operate the vehicle while
wearing protective clothing.
2.8 Work rules
Unless specified otherwise, the ignition must be turned off during all work (models with ignition lock, models
with remote key) or the engine must be at a standstill (models without ignition lock or remote key).
Special tools are necessary for certain tasks. The tools are not a component of the vehicle, but can be ordered
using the number in parentheses. Example: bearing puller (15112017000)
During assembly, use new parts to replace parts which cannot be reused (e.g. self-locking screws and nuts,
seals, sealing rings, O-rings, pins, and lock washers).
In the case of certain screws, a screw adhesive (e.g. Loctite®) is required. Observe the manufacturer's instruc-
tions.
If thread locker (e.g., Precote®) has already been applied to a new part, do not apply any additional thread
locker.
After disassembly, clean the parts that are to be reused and check them for damage and wear. Change dam-
aged or worn parts.
After completing a repair or service work, check the operating safety of the vehicle.

2 SAFETY ADVICE
16
2.9 Environment
If you use your motorcycle responsibly, you can ensure that problems and conflicts do not occur. To protect
the future of the motorcycle sport, make sure that you use your motorcycle legally, display environmental con-
sciousness, and respect the rights of others.
When disposing of used oil, other operating and auxiliary fluids, and used components, comply with the laws
and regulations of the respective country.
Because motorcycles are not subject to the EU regulations governing the disposal of used vehicles, there are
no legal regulations that pertain to the disposal of an end-of-life motorcycle. Your authorized Husqvarna Motor-
cycles dealer will be glad to advise you.
2.10 Owner's Manual
It is important that you read this Owner's Manual carefully and completely before making your first trip. The
Owner's Manual contains useful information and many tips on how to operate, handle, and service your motor-
cycle. Only then will you find out how to customize the vehicle ideally for your own use and how you can pro-
tect yourself from injury.
Keep the Owner's Manual in an accessible place to enable you to refer to it as needed.
If you would like to know more about the vehicle or have questions on the material you read, please contact an
authorized Husqvarna dealer.
The Owner's Manual is an important component of the vehicle and must be handed over to the new owner if
the vehicle is sold.
The Owner's Manual is also available for download from your authorized Husqvarna Motorcycles dealer and on
the Husqvarna Motorcycles website.
International Husqvarna Motorcycles website: www.husqvarna-motorcycles.com

IMPORTANT NOTES 3
17
3.1 Manufacturer and implied warranty
The work prescribed in the service schedule must only be carried out in an authorized Husqvarna Motorcy-
cles workshop and confirmed in the Husqvarna Motorcycles Dealer.net, as otherwise all warranty claims will
be void. Damage or secondary damage caused by tampering with and/or conversions on the vehicle are not
covered by the manufacturer warranty.
3.2 Fuel, auxiliary substances
Note
Environmental hazard Improper handling of fuel is a danger to the environment.
–Do not allow fuel to enter the groundwater, the soil, or the sewage system.
Use fuels and auxiliary substances in accordance with the Owner's Manual and specification.
3.3 Spare parts, accessories
For your own safety, only use spare parts and accessory products that are approved and/or recommended by
Husqvarna Motorcycles and have them installed by an authorized Husqvarna Motorcycles workshop. Husq-
varna Motorcycles accepts no liability for other products and any resulting damage or loss.
Certain spare parts and accessory products are specified in parentheses in the descriptions. Your authorized
Husqvarna Motorcycles dealer will be glad to advise you.

3 IMPORTANT NOTES
18
The current Husqvarna Motorcycles accessories for your vehicle can be found on the Husqvarna Motorcycles
website.
International Husqvarna Motorcycles website: www.husqvarna-motorcycles.com
3.4 Service
A prerequisite for perfect operation and prevention of premature wear is that the service, care, and tuning work
on the engine and chassis is properly carried out as described in the Owner's Manual. An incorrect suspension
setting can lead to damage and breakage of chassis components.
Use of the vehicle under difficult conditions, such as in heavy rain, intense heat or with a heavy payload, may
result in significantly increased wear of components such as the drive train, brake system, or suspension com-
ponents. For this reason, it may be necessary to inspect or replace parts before the next scheduled service.
It is imperative that you adhere to the stipulated run-in times and service intervals. If you observe these exactly,
you will ensure a much longer service life for your motorcycle.
The relevant mileage or time interval is whichever occurs first.
3.5 Figures
The figures contained in the manual may depict special equipment.
In the interest of clarity, some components may be shown disassembled or may not be shown at all. It is not
always necessary to disassemble the component to perform the activity in question. Please follow the instruc-
tions in the text.