
MAIN MUSIC SERVER REAR
MUSIC SERVER TROUBLESHOOTING
In the BLAZE AV Rack, there are two Music
Server PCs. a main and a backup (these
should be labelled accordingly).
To change over to the backup PC:
1. Ensure that the Power is switched off
on both machines (no lights visible).
2. Move the Audio Jack from the main
music server to the audio socket on
the backup server .
3. Move the Ethernet Cable from the main
music server to the ethernet port on
the backup server .
4. Move the USB Cable from the main
music server to the USB Port on the
backup server (ensure the USB port
used is the same as the main server).
5. Finally, Move the Power Cable from the
the main music server to the power
socket on the backup server .
The backup server should come on
automatically as soon as the power cable
is plugged in.
After this is done, please wait 3 minutes
then try and use the system again.
NOTE: The Backup PC won’t be set to the
correct ‘Daily Class’. In order to change it
to the correct class, please contact the
Hutchison Technologies Helpdesk and
someone will be able to assist.
2
6
2
2
MAIN MUSIC SERVER FRONT
BACKUP MUSIC SERVER REAR
2
BACKUP MUSIC SERVER FRONT
3
6
4
5
3
64
5
3
3
4
4
5
5
6
+44 (0)1382 835 000