Hy-Ram Fein Air Saw User manual

Page 1 of 12
OPERATING INSTRUCTIONS
FOR
Fein Air Saw
1. Machine to be operated by trained per onnel.
2. In truction to be read before u e.
Hy-Ram Mansfield
Pelham Street
Mansfield
Nottinghamshire
NG18 2EY
Tel: [phone]
Fax: [phone]
Hy-Ram Bury
9 Portland
Industrial Estate
Portland Street
Bury
Lancashire
BL9 6EY
Tel: [phone]
Fax: [phone]
Hy-Ram Enfield
Unit 2, Riverwalk
Business Park
Riverwalk Road
Enfield
EN3 7QN
Tel: 2 8 8 5 8 1
Fax: 2 8 8 5 6 1
Hy-Ram Livingston
18 Napier Square
Houstoun Road
Trading Estate
Livingston
West Lothian
EH54 5DG
TEL: [phone]
Fax: [phone]

Page 2 of 12

Page 3 of 12

Page 4 of 12

Page 5 of 12

Page 6 of 12

Page 7 of 12

Page 8 of 12

Page 9 of 12

Page 10 of 12
Certificate of Calibration.
• This product has been inspected and tested in accordance with the ISO9001 quality
control systems and procedures in place at Hyram Engineering Co td.
• This product has no calibration period, periodic, safety inspections should be carried
out by the operator if in any doubt please contact the manufacturer for further
information
Decommissioning & Disposal Instructions
These give the instructions for decommissioning and disposal of the equipment and
confirm how it is to be taken out of service safely, in respect of the Essential Health
and Safety Requirements.
• If a Hyram tool has reached the end of its useful working life and cannot be
refurbished it must be disposed of through a licensed scrap or waste disposal
facility. Alternatively, a reverse engineering company could be used to strip the
equipment for recycling purposes.
• Disposal is the responsibility of the Customer this can also be achieved by
returning the product back to the manufacturer.
Warranty Information.
1. Extent of Warranty.
(a) Hy-Ram Engineering Co td warrants to the end-user customer that its products will
be free from defects in materials and workmanship, for six months after the date of
purchase by the end-user customer, subject to providing proof of purchase.
(b) If Hy-Ram Engineering Co td receives, during the warranty period, notice of a
defect in product which is covered by this warranty, Hy-Ram Engineering Co td
shall either repair or replace the product, at its option. Any replacement product
may be either new or like-new, provided that it has functionality at least equal to
that of the product being replaced.
(c) All warranty work will be carried out by Hy-Ram Engineering Co td unless
otherwise agreed. On-site warranty and repair or replacement services are available
from authorised Hy-Ram Engineering Co td service facilities world-wide.
(d) Customers shall prepay shipping charges for products returned to Hy-Ram
Engineering Co td for warranty service, and Hy-Ram Engineering Co td will
charge for return of the products back to the customer.
(e) This warranty statement gives the customer specific legal rights. The customer may
also have other rights which vary from country to country in the world.

Page 11 of 12
Pre-conditions for Warranty Application.
Hy-Ram Engineering Co td’ warranty covers only those defects which arise as a result of
normal use of the product, and this warranty shall only apply in the following
circumstances:
(a) All the instructions contained in the operating manual have been complied with
(b) And none of the following apply:
(i) Improper or inadequate maintenance;
(ii) Physical abuse;
(iii) Unauthorised modification, misuse or any use not in accordance with the
operating manual and good industry practice;
(iv) Operation outside the products specifications;
(v) Improper site preparation or maintenance; and
(vi) Faulty pipe or fittings.
Limitations of Warranty.
(a) Hy-Ram Engineering Co td does not warrant the operation of any product to be
uninterrupted or error free.
(b) Hy-Ram Engineering Co td makes no other warranty of any kind, whether express
or implied, with respect to its products. Hy-Ram Engineering Co td specifically
disclaims the implied warranties of satisfactory quality and fitness for a particular
purpose.
(c) To the extent that this warranty statement is inconsistent with the law of the
locality where the customer uses the product, this warranty statement shall be deemed
modified by the minimum necessary to be consistent with such local law.
(d) To the extent allowed by local law, the remedies provided in this warranty
statement are the customer’s sole and exclusive remedies.
(e) This tool has been designed for the range of fittings available at the time of its
design and development. Hy-Ram Engineering Co td can accept NO liability for the
unit’s ability or otherwise to work with new or different fittings that subsequently
appear in the market place.

Page 12 of 12
Please complete this information and keep it safely with your proof of purchase receipt.
You will require it for any warranty claim.
Where purchased ...................................................................................
Date of purchase ...................................................................................
Name & address ...................................................................................
Of purchaser
...................................................................................
...................................................................................
Type of tool ...................................................................................
Serial number ...................................................................................
For Service and repair please contact:
Hy-Ram Mansfield
Pelham Street
Mansfield
Nottinghamshire
NG18 2EY
Tel: [phone]
Fax: [phone]