I-GO Windsor Dining Chair User manual

Supports
up to 250 lbs
Date Manufactured : May, 2022
SKU # : H001A02EM1-WF1(Black), H001A02EM2-WF1(White), H001A02EM3-WF1(Brown)
H001A02EM4-WF1(Blue), H001A02EM5-WF1(Green)
Assembly Instruction
Page 1
////////////////////////////////////////////////////////////////////////////////////////////////////////////////
igo Windsor Dining Chair
igoseating
Congratulation on your buying of this premium windsor dining chair, which is designed to add
on your beloved home a traditional, slatted back silhouette and to bring a hint of classic styling
to any gathering space. Enjoy & Thank You!

PARTS LIST
Name
Part
Qty.
A
Back
x1PC
B
Seat
x1PC
C
Front Legs
98°degrees
x1PAIR
D
Back Legs
105°degrees
x1PAIR
E
Bolts
M8x40mm
x12PCS
F
Allen Wrench
x1PC
Page 2

Please follow the following procedures step by step in building your
Windsor Dining Chair, take special note to the sequence of steps:
Step 1: Attach the Seat (Part B) to the Back (Part A) by using bolts (Part E x4pcs). Tighten by Allen
Wrench (Part F)
Step 2: Attach the Front Legs (Part C) and Back Legs (Part D) to the seat (Part B) by using bolts
(Part E x8pcs). Tighten by Allen Wrench (Part F)
Step 3: Position the assembled chair upright. Then completed!
Page 3
ATTENTION ： Make sure all bolts and screws are fully tightened before using chair.
* This Chair is for sitting only. Do not stand on this chair. Do not use this chair as a step ladder.
* Use this chair only for seating one person at a time.
* Do not use this chair unless all bolts, screws and other parts are firmly tightened.
* Every month, check all bolts, screws and other parts and tighten any that may have loosened.
* If parts are missing, broken, damaged, or worn, stop use of the product until repairs are made,
using factory supplied parts.