Frontgate Kensington FG045-10-P User manual

Kensington Pushback Recliner
FG045-10-P

Important Safety Instructions:
•Please read all instructions carefully before assembling.
•For your safety, assembly by two or more adults is strongly recommended.
Pre-assembly:
•Remove all parts and hardware from the box and lay out on a clear carpeted or scratch-free work surface, as
this will avoid damaging parts during assembly. The shipping box provides an ideal work surface.
•Do not dispose of any packaging or contents of the shipping carton until assembly is completed to avoid
accidentally discarding small parts or hardware.
Care Instructions:
•Dust often using a clean, soft, dry and lint-free cloth.
•When blot spills, wipe with a clean, damp cloth immediately.
•We do not recommend the use of chemical cleansers, abrasives or furniture polish on our lacquered finish.
•Hardware may loosen over time. Periodically check to make sure all connections are tight. Re-tighten if necessary.
PIECE
DESCRIPTION
PICTURE
QUANTITY
A
Seat
1x
B
Back
1x
C
Washer
4x
D
Front Leg
2x
E
Rear Leg
2x
Step:
I: Insert washer [C] on the Front leg [D] and Rear leg [E].
II: Screw the Front leg [D] and Rear leg [E] into the seat [A] as shown in Diagram 1
III: Insert Back [B] into seat [A] as shown in Diagram 2 and 3.
A
B

1
C
AD
E
E
C
C
D
D
E
C
PB ??? f (1)-4-2.jpg
PB ??? f (1)-4-3.jpg
PB ??? f (1)-4-4.jpg
A
B
C
C
E
D
CCD
E

A
B
`Click!'
`Click!'
2
3

4
5