I-gotU Q-72 User manual

Device Overview
How to wear your Q-Watch?
User ManualQ-72 Q-Watch
EN
3 4
Charge your Q-Watch Change the watch band
Put on the watch with the watch face facing up and wrap the band
around your wrist. Snap the metal fastening buttons into two of the
holes on the other strap to adjust the fit on your wrist.
Slide the end of the strap through the loop, and slide the loop anywhere you
like alongside the strap. The two metal fastening buttons are removable and
can be relocated to any other holes on the strap as you prefer.
To charge your Q-Watch, place it in the charging box at the
other end of the USB cable. Close the box afterwards, and
make sure the Q-Watch is securely covered. Plug the USB
connector to either a PC or power adapter to start charging.
To change the watch band, please consult a watch dealer for assistance
on choosing the right size of watch band for a change. Make sure the
replacement band comes with the following measurements:
Width: ≤ 20 mm
Thickness: ≤ 4 mm
Video Demo: http://ww2.voiis.com/igotu-life/wear/Q-Watch-SHR
Video Demo
Wear Q-Watch on your wrist
1
Wristband Metal buttonCore
Button
20 mm
4 mm
1
2
3
Metallic contact for charging
2Fasten Q-Watch with metal buttons

Get started with Q-Watch
Download and Install i-gotU Life app
1 2
3 4
Start Using Q-Watch
Set up Q-Watch
Features of Q-Watch & i-gotU Life App
User ManualQ-72 Q-Watch
Please download i-gotU Life app from Google Play or the App Store
and have it installed on your smartphone:
https://play.google.com/store/apps/details?id=com.mobileaction.ilife
http://appstore.com/igotulife
Apk download: http://global.mobileaction.com/download/apk
Supported device
Any Android smartphone (v4.3 and up) with built-in 4.0
Bluetooth connectivity; or
iPhone 4s and later models, iPad 2 and later models,
and iPod Touch (all with iOS version 7.0 and up).
A complete list of supported smartphone or mobile
devices can be found at:
http://ww2.voiis.com/qband/devices.html
Important Notice
Please make sure your Q-Watch is fully charged when used for the first
time. It takes about 2 hours before it is fully charged.
Although the device is usable in the rain, its use under water is
prohibited. Please avoid showering or sauna/steam bathing because
high temperature, steam and water jet may cause damage to the
device.
Please do not use any corrosive chemical to clean the device.
The built-in Li-Polymer Battery might be damaged if it remains low
voltage for a long time. It is suggested that you charge the battery
once every three months to prolong the battery's lifetime, even though
you don't use the device very often or do not plan to use it for a while.
1.
2.
3.
4.
Your Q-Watch can be configured directly on the i-gotU Life app.
First time setup:
Open the i-gotU Life app.
A Setup Wizard will be launched automatically.
Follow the on-screen instructions to proceed with more settings.
Set up a new device from Settings:
Open the i-gotU Life app.
Tap the app icon at the upper left corner to open function menu.
Choose Settings.
Tap Setup New Device under MORE DEVICE SETTINGS.
Follow the on-screen instructions to continue.
Note
Your personal information is used to calculate your Base Metabolic
Rate (BMR), which determines your calories burned.
1.
2.
3.
1.
2.
3.
4.
5.
1. Switch between different function modes
2. Change display information
3. Q-Watch modes
1. Long-press the button on the Q-Watch until you see 4 icons
on the screen for mode selection.
2. Press the button to switch mode.
3. You’ll be entering the selected mode in 3 seconds.
Information shown on the screen will vary as you press the button on
the Q-Watch to toggle between screens.
Daily mode: Analyzes your daily data, including steps taken
and calories burned, and displays current UV index.
Sleep mode: Tracks your sleep pattern and quality.
Sports mode: Starts a workout and displays information
including duration, steps taken, calories burned, UV-index and
distance traveled during the workout.
Nap mode: Awakes you via vibration after a short nap.
Connection Status
Progress
Battery Status
UV – Index
Silent Alarm
Notification
Online Help
Manual download
Silent Alarm awakes you using gentle vibrations of the Q-Watch.
You can dismiss the alarm by long-pressing the button on the
Q-Watch. In case you miss the alarm, Q-Watch will alert you again
in 5 minutes. Alarms can be set up from: i-gotU Life App Menu ->
Silent Alarm.
You will be notified with incoming calls, SMS, E-Mail, or alerts from
the social apps via vibration. When notified about an incoming call
on an Android smartphone, you may reject the call by long-pressing
the button on Q-Watch. Notification can be set up from: i-gotU Life
App Menu -> Notification.
Android: http://ww2.voiis.com/igotu-life/help.html?language=en
iOS: http://ww2.voiis.com/igotu-life/help.html?language=en&platform=ios
http://www.mobileaction.com/download/Q-Band_download.jsp
Note on environmental protection:
After the implementation of the European Directive 2002/96/EU in the
national legal system, the following applies:
Electrical and electronic devices may not be disposed of with domestic
Waste. Consumers are obliged by law to return electrical and electronic
devices at the end of their service lives to the public collecting points set up
for this purpose or point of sale. Details to this are defined by the national
law of the respective country. This symbol on the product, the instruction
manual or the package indicates that a product is subject to these
regulations. By recycling, reusing the materials or other forms of utilizing old
devices, you are making an important contribution to protecting our
environment.
WEEE
•
•
•
4. Icon description