Casio 3435 User manual

Operation Guide 3435
E-9
2. Press Cto change the selection in the following sequence.
MinutesHour
Normal Alarm Mode (No digit flashes)
C
C C
3. Press Ato increase the selected digits. Holding down Achanges the number at
high speed.
xThe format (12-hour and 24-hour) of the alarm time matches the format you select
for normal timekeeping.
xWhen setting the alarm time using the 12-hour format, take care to set the time
correctly as morning or afternoon (PM).
4. After you set the alarm time, use Cto return to the Alarm Mode.
xIf you do not operate any button for one or two minutes while a selection is flashing,
the flashing stops and the watch goes back to the Timekeeping Mode automatically.
E-8
Alarm
When the Daily Alarm is turned on, the alarm sounds for
20 seconds at the preset time each day. When the Hourly
Time Signal is turned on, the watch beeps every hour on
the hour.
xAll of the operations in this section are performed in the
Alarm Mode, which you enter by pressing B(page E-4).
To set the alarm time
1. In the Alarm Mode, press C. The hour digits flash
because they are selected.
xThis operation automatically turns on the alarm.
Alarm on indicator
Hourly time signal
on indicator
Alarm time
(Hour : Minutes)
Mode indicator
E-7
xWith the 24-hour format, times are displayed in the range of 0:00 to
23:59, with 24H indicator.
24H indicator
E-6
Timekeeping
Use the Timekeeping Mode to view the current time and
date.
xDay of the week is displayed as follows.
SU : Sunday MO : Monday
TU : Tuesday WE : Wednesday
TH : Thursday FR : Friday
SA : Saturday
To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press Ato switch between the
12-hour and 24-hour formats.
xWith the 12-hour format, the PM indicator appears for
times in the range of noon to 11:59 p.m. and no indicator
appears for times in the range of midnight to 11:59 a.m.
PM indicator
Day of week
Day
Hour : Minutes Seconds
E-5
xThe watch returns to the Timekeeping Mode automatically if you do not perform any
button operation for one or two minutes in the Alarm Mode and Time Setting Mode.
xIn any mode, press Cto illuminate the display.
Stopwatch Mode Time Setting Mode
B
B
E-4
General Guide
xPress Bto change from mode to mode.
xAfter you perform an operation in any mode, pressing Breturns to the Timekeeping
Mode.
Timekeeping Mode Alarm Mode
BB
E-3
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To toggle between 12-hour and 24-hour timekeeping ......................................... E-6
To set the alarm time............................................................................................... E-8
To stop the alarm .................................................................................................. E-10
To switch the Daily Alarm and Hourly Time Signal on and off ......................... E-10
To test the alarm.................................................................................................... E-10
To measure times with the stopwatch................................................................. E-12
To set the time and date ....................................................................................... E-13
E-2
Contents
General Guide.......................................................................................................... E-4
Timekeeping............................................................................................................. E-6
Alarm ........................................................................................................................ E-8
Stopwatch .............................................................................................................. E-11
Time Setting........................................................................................................... E-13
Specifications ........................................................................................................ E-15
E-1
xNote that the product illustrations in this manual are intended for reference only,
and so the actual product may appear somewhat different than depicted by an
illustration.
E
About This Manual
xDepending on the model of your watch, display text
appears either as dark figures on a light background, or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
xButton operations are indicated using the letters shown
in the illustration.
xEach section of this manual provides you with the
information you need to perform operations in each
mode.
MA1402-EA © 2014 CASIO COMPUTER CO., LTD.

Operation Guide 3435
E-15
Specifications
Accuracy at normal temperature: ±30 seconds a month
Timekeeping: Hour, minutes, seconds, p.m., day, and day of the week
Time system: Switchable between 12-hour and 24-hour formats
Calendar system: Auto-calendar set at 28 days for February
Alarm: Daily alarm, Hourly time signal
Stopwatch
Measuring units: 1/100 seconds
Measuring capacity: 59 minutes, 59.99 seconds
Measuring modes: Elapsed time, split time, and two finishes
Illumination: LED (light-emitting diode)
Battery: One lithium battery
Type: CR2016
Battery life: Approx. 7 years
x1 second of illumination operation per day
x20 seconds of alarm operation per day
E-14
3. While the second’s digits are selected (flashing), press Ato reset the seconds to
. If you press Awhile the second’s count is in the range of 30 to 59, the seconds
are reset to and 1 is added to the minutes. If the second’s count is in the range of
00 to 29, the minute’s count is unchanged.
4. While any other digits (besides seconds) are selected (flashing), press Ato
increase the number. While the day of the week is selected, pressing Aadvances
to the next day. Holding down Achanges the current selection at high speed.
5. After you set the time and date, press Bto return to the Timekeeping Mode.
xIf you do not operate any button for one or two minutes while a selection is flashing,
the flashing stops and the watch goes back to the Timekeeping Mode automatically.
E-13
Time Setting
Use the Time Setting Mode to set the current time and
date.
To set the time and date
1. Use Bto enter the Time Setting Mode (page E-5).
xThe second’s digits flash because they are selected.
2. Press Cto change the selection in the following
sequence.
C
Minutes
Seconds
Month
Hour
Day
Day of
the Week
C
CC
C
C
PM indicator
Day of week
Day
Hour : Minutes Seconds
E-12
To measure times with the stopwatch
(a) Elapsed time measurement
A A A A C
Start Stop Resume Stop Clear
(b) Split time measurement
A C C A C
Start Split
(SPL displayed)
Split release Stop Clear
(c) Split time and 1st-2nd place times
A C A C C
Start Split
First runner
finishes.
Display time of
first runner.
Stop
Second runner
finishes.
Split release
Display time of
second runner.
Clear
E-11
Stopwatch
The Stopwatch Mode lets you measure elapsed time, split
times, and two finishes. The range of the stopwatch is
59 minutes, 59.99 seconds.
xThe stopwatch continues to run, restarting from zero after
it reaches its limit, until you stop it.
xThe stopwatch measurement operation continues even if
you exit the Stopwatch Mode.
xExiting the Stopwatch Mode while a split time is frozen
on the display clears the split time and returns to elapsed
time measurement.
xAll of the operations in this section are performed in the
Stopwatch Mode, which you enter by pressing B(page
E-5).
Mode indicator
Minutes
1/100 second
Seconds
E-10
To stop the alarm
Press any button to stop the alarm after it starts to sound.
To switch the Daily Alarm and Hourly Time Signal on and off
Press Awhile in the Alarm Mode to change the status of the Daily Alarm and Hourly
Time Signal in the following sequence.
A A A
Both on Both off Daily Alarm only Hourly Time
Signal only
A
To test the alarm
Hold down Awhile in the Alarm Mode to sound the alarm.