I-Tech IT9000 User manual

IT9000 Control Software
PV6000 Installation Instruction

Notices
© Itech Electronic, Co., Ltd. 2019
No part of this manual may be
reproduced in any form or by any means
(including electronic storage and
retrieval or translation into a foreign
language) without prior permission and
written consent from Itech Electronic,
Co., Ltd. as governed by international
copyright laws
Manual Part Number
IT9000-PV6000
Revision
1st Edition: Jul. 15th, 2019
Itech Electronic, Co., Ltd.
Trademarks
Pentium is U.S. registered trademarks
of Intel Corporation.
Microsoft, Visual Studio, Windows and
MS Windows are registered trademarks
of Microsoft Corporation in the United
States and/or other countries and
regions.
Warranty
The materials contained in this
document are provided “as is”, and
is subject to change, without prior
notice, in future editions. Further, to
the maximum extent permitted by
applicable laws, ITECH disclaims
all warrants, either express or
implied, with regard to this manual
and any information contained
herein, including but not limited to
the implied warranties of
merchantability and fitness for a
particular purpose. ITECH shall
not be held liable for errors or for
incidental or indirect damages in
connection with the furnishing, use
or application of this document or of
any information contained herein.
Should ITECH and the user enter
into a separate written agreement
with warranty terms covering the
materials in this document that
conflict with these terms, the
warranty terms in the separate
agreement shall prevail.
Technology Licenses
The hardware and/or software
described herein are furnished under a
license and may be used or copied only
in accordance with the terms of such
license.
Restricted Rights Legend
Restricted permissions of the U.S.
government. Permissions for software
and technical data which are authorized
to the U.S. Government only include
those for custom provision to end users.
ITECH provides this customary
commercial license in software and
technical data pursuant to FAR 12.211
( Technical Data) and 12.212
( Computer Software) and, for the
Department of Defense, DFARS
252.227-7015 ( Technical Data –
Commercial Items) and DFARS
227.7202-3 ( Rights in Commercial
Computer Software or Computer
Software Documentation).
Safety Notices
A CAUTION sign denotes a
hazard. It calls attention to an
operating procedure or practice
that, if not correctly performed
or adhered to, could result in
damage to the product or loss of
important data. Do not proceed
beyond a CAUTION sign until
the indicated conditions are fully
understood and met.
AWARNING sign denotes a
hazard. It calls attention to an
operating procedure or practice
that, if not correctly performed
or adhered to, could result in
personal injury or death. Do not
proceed beyond a WARNING
sign until the indicated
conditions are fully understood
and met.
NOTE
A NOTE sign denotes important
hint. It calls attention to tips or
supplementary information that
is essential for users to refer to.

IT9000 Installation Instruction
Content
Chapter1 Introduction...........................................................................................................1
1.1 About this manual..............................................................................................................1
1.2 Document Information .......................................................................................................1
1.3 Brief Introduction ...............................................................................................................1
1.4 Software Matching Relationship and Mode of Access........................................................2
Chapter2 Installing Software................................................................................................4
2.1 Installing Operating System...............................................................................................4
2.2 Installing NI 488.2 Driver ...................................................................................................4
2.3 Installing NI VISA...............................................................................................................7
2.4 Installing ICP Driver.........................................................................................................12
2.5 Installing IT9000 Software ...............................................................................................16
2.6 Verifying the Installation...................................................................................................17
Chapter3 Removing Software............................................................................................18

Introduction
Copyright © Itech Electronic Co., Ltd. 1
Chapter1Introduction
1.1 About this manual
This manual, as an installation and operation guide for the user, includes the
following contents:
⚫Introduction
⚫Installing Software
⚫Removing Software
1.2 Document Information
The supporting documentations of IT9000-PV6000 are as follows which can be
accessed via the CD supplied with the instrument or ITECH official website.
Manual Title
Description
IT9000-PV6000 Installation Instruction
Explain how to install, inspect the
software, and how to connect
accessories.
IT9000-PV6000 User Manual
Introduce the functions and operating
methods of IT9000-PV6000.
1.3 Brief Introduction
IT9000-PV6000 is a kind of easy-to-use and practicable control software
designed by Itech Electronic Co., Ltd. It is applicable to Itech IT6000C, IT6000B,
IT6000D and IT8000 Series power supply. With this software, you can take all
operations for power front panel via computer control and enjoy great
convenience in remote control. This software supports RS232, USB, GPIB and
Ethernet port communication.

Introduction
Copyright © Itech Electronic Co., Ltd. 2
1.4 Software Matching Relationship and Mode of
Access
Software matching relationship required by IT9000 is as follows:
Item
Version
Obtained Method
Operating System
WIN7 32/64,
WIN8 32/64,
WIN10 32/64
Download from the official website
OFFICE
2003/2007
Download from the official website
Net Frame Work
Net Frame
Work 4.0 or
above
Download from the official website
VISA
V5.2 or above
Recommend to download from
the original company. The
download site:
http://www.ni.com/download/ni-vis
a-5.2/3337/en/
NI
(Used to develop GPIB
applications, no
installation is required if
this feature is not
involved.)
NI488.2 3.0.2
or above
Recommend to download from
the original company. The
download site:
http://www.ni.com/en-us/support/d
ownloads/drivers/download.ni-48
8-2.html
ICP
ICP460 or
above
Recommend to download from
the original company. The
download site:
http://www.ni.com/download/ivi-co
mpliance-package-4.6/4027/en/
IT9000 Software
IT9000_V1.0.0
.7_PV6000_V1
.0.0.0
Obtained from delivery CD

Introduction
Copyright © Itech Electronic Co., Ltd. 3
Note
When downloading related software on the official website of NI, you can choose to
download according to the operating system adaptation version information provided in
the “Operating System”.

Installing Software
Copyright © Itech Electronic Co., Ltd. 4
Chapter2Installing Software
2.1 Installing Operating System
Install operating systems of corresponding versions based on installation
requirements. For detailed installation steps, refer to corresponding operation
guidance on Windows operating system installation software.
To use Export function of IT9000 software, be sure to install OFFICE software.
2.2 Installing NI 488.2 Driver
It is applicable to industrial standards for developing GPIB applications.
Windows NI-488.2 integrates a complete set of developing tools to enable fast
starting and operation of applications, and its high-performance drivers save
test time and improve efficiency to the maximum extent.
Procedure
1. Run setup.exe in the folder Install Package.
2. Click “Next” to enter the Select Page of Installation Directory.

Installing Software
Copyright © Itech Electronic Co., Ltd. 5
3. Click “Next” to select the components to be installed. If there are no special
requirements, keep the default settings.
4. Click “Next” and select whether to check the check box as shown below in
the “Product Notice” page.

Installing Software
Copyright © Itech Electronic Co., Ltd. 6
5. Click “Next” and select whether to read and accept the terms in the License
Agreement.
6. Click “Next” to install.

Installing Software
Copyright © Itech Electronic Co., Ltd. 7
7. After the installation finished, click “Next”, and the message “Restart
Computer”will pop up. You can select “Restart Later” to restart the
computer after all other drivers are installed.
2.3 Installing NI VISA
NI-VISA is a VISA I/O standard implemented by NI. It provides the
programming interfaces between hardware and application development
environments like NI LabVIEW, LabWindows/CVI and Measurement Studio
(used for Microsoft Visual Studio).
1. Run setup.exe in the folder Install Package.

Installing Software
Copyright © Itech Electronic Co., Ltd. 8
2. Click “Next”.
3. Click “Next” to select the components to be installed. If there are no special

Installing Software
Copyright © Itech Electronic Co., Ltd. 9
requirements, keep as default.
4. Click “Next” and select whether to check the check box as shown below in
the “Product Notice” page.

Installing Software
Copyright © Itech Electronic Co., Ltd. 10
5. Click “Next”.
6. Click “Next” and select whether to read and accept the terms in the License
Agreement.

Installing Software
Copyright © Itech Electronic Co., Ltd. 11
7. Click “Next” to confirm installation information.
8. Click “Next” to install.

Installing Software
Copyright © Itech Electronic Co., Ltd. 12
9. After the installation finished, click “Next”, and the message of “Restart
Computer” will pop up. Restart the computer to make driver installation
effective.
2.4 Installing ICP Driver
The NI IVI Compliance Package comprises class drivers and support libraries
for developing and using IVI device interchangeability applications. ICP is
based on and conforms to the latest versions of the instrument programming
specifications defined by IVI Fund.
Operation steps
1. Run setup.exe in the folder Install Package.
2. Click “Next” to enter the Select Page of Installation Directory.

Installing Software
Copyright © Itech Electronic Co., Ltd. 13
3. Click “Next” to select the components to be installed. If there are no special
requirements, keep as default.

Installing Software
Copyright © Itech Electronic Co., Ltd. 14
4. Click “Next” and select whether to check the check box as shown below in
the “Product Notice” page.
5. Click “Next” and select whether to read and accept the terms in the License
Agreement.
6. Click “Next” to confirm installation information.

Installing Software
Copyright © Itech Electronic Co., Ltd. 15
7. Click “Next” to install.
8. After the installation finished, click “Finish”, and the message of “Restart

Installing Software
Copyright © Itech Electronic Co., Ltd. 16
Computer” will pop up.
2.5 Installing IT9000 Software
Operation steps
1. Double click and run “setup.exe”.
2. Click “Next”. Confirm the installation information.
3. Click “Next” to deploy software package.

Installing Software
Copyright © Itech Electronic Co., Ltd. 17
4. Click “Next” to install.
5. After the installation finished, click “Finish”.
2.6 Verifying the Installation
After the installation finished, click Start\All Programs\Itech\IT9000 and then
click on the IT9000 Run Program to start it.
If you’ve selected the option “Create a Desktop Shortcut” during installation,
you may also run the software by directly clicking on the desktop shortcut
created.
The IT9000 main page is shown as below.