IASUS XSOUND 2.1 User manual

IASUS_XSOUND 2.1_INSTRUCTION MANUAL_Revised 2020
h e l m e t s p e a k e r s
Congratulations on the purchase of your IASUS Concepts XSound
2.1 Helmet Speakers! You have now joined an increasing group of
individuals enjoying the world’s best in helmet audio.
The XSound 2.1 Helmet Speakers are a premium sound system
designed specically for helmets. Each of the ultra-thin speakers
bring precise, full-range audio to full-face and most open-face
helmets.
Please review this owner’s manual before use and follow our
recommended installation procedures to get your XSound 2.1
performing at their absolute best. That’s 15 years of IASUS audio
design and evolution, inside your helmet.

IASUS_XSOUND 2.1_INSTRUCTION MANUAL_Revised 2020
A............................... XSound 2.1 Helmet Speakers
B............................... Foam Covers *pre-installed on the XSound 2.1 Helmet speakers (A)
C1 / C2................ 3M Velcro Adhesives (Loop and Hook)
D............................... 3.5mm Extension Cable
E............................... Optional Foam Pad Spacers (Sold separately)
A
D
C1 C2
E
B1
Package Content

IASUS_XSOUND 2.1_INSTRUCTION MANUAL_Revised 2020
!
Please follow all operating guidelines and parameters of the audio source device with
which you are using the speakers.
Keep the speakers clean and dry.
Do not attempt to disassemble the speakers, or alter and modify the wires.
Do not drop, knock, or shake the speakers.
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the speakers.
It is dangerous to ride a motorcycle or engage in sports activities while being unaware of your surroundings.
Only use your XSound 2.1 Helmet Speakers at volume levels at which you can still remain alert of what’s
around you. Please check your state and federal laws for using helmet audio while operating a motorized
vehicle.
Do not operate your audio source device at high audio volumes when using XSound 2.1 Helmet Speakers.
Hearing experts advise against continuous exposure to high volume levels. If you experience ringing in your
ears, discontinue using the speakers.
The XSound 2.1 is a precision crafted audio product. Therefore,
they need to be installed precisely in contact and centered on
your ears for accurate sound projection. Any gaps and poor
centering will result in poor audio quality and volume fron
wind and other ambient noises.
The XSound 2.1 was designed and tested for use with IASUS
Stealth, Rekon and Mobile Amplifiers, as well as smartphones,
and digital media players eqquiped with a 3.5mm jack. As such,
the left speaker cable is longer than the right. Each XSound 2.1
speaker is designated left “L” and right “R” on the speaker housing.
IASUS does not directly support using the XSound 2.1 with
non-IASUS Bluetooth motorcycle headset.
Please use at your own risk.
•
•
•
•
•
Use & Care
Using the XSOUND 2.1
Caution

IASUS_XSOUND 2.1_INSTRUCTION MANUAL_Revised 2020
Before Installing XSOUND 2.1
Installing XSOUND 2.1
We strongly recommend testing your speakers outside of your helmet first before installing them by
doing the following:
Connect the XSound 2.1 directly into your smartphone’s 3.5mm jack.
Hold the speakers in contact and centered on your ears while testing audio. Any gaps will compromise the sound.
Adjust the position of the speakers on your ears until the audio sounds the best. Remember their positions.
Wipe away any dust or debris on the surface where the XSound 2.1 will be installed onto.
Peel apart the Velcro adhesives (C1/C2) to reveal the loop and hook halves. They arrive in the box stuck together.
Place the XSound 2.1 (A) onto the Velcro inside the helmet.
Repeat steps 1-5 for the other side.
Tuck the wires behind the helmet padding for a tidy installation.
Connect the XSound 2.1 to your
audio source device. Use the 3.5mm
Extension Cable (F) if necessary.
Peel away the backing paper on the loop piece
(C1). Attach the loop piece into your helmet.
Peel away the backing paper on the hook piece (C2).
Attach the hook piece onto the back of the XSound
2.1.
•
1•
5•
6•
7•
8•
3• 4•
•
2•
•

IASUS_XSOUND 2.1_INSTRUCTION MANUAL_Revised 2020
Testing the installation
• Ensure the XSound 2.1 helmet speakers are once again fully contacting your ears and centered on them
after putting your helmet on. If they are not centered, reposition the XSound 2.1 inside your helmet.
•If they do not make good contact, consider using IASUS foam pad spacers* between the helmet and the XSound
2.1.
Troubleshooting
For more help and troubleshooting, please visit our website
iasus-concepts.com or contact us at [email protected]
No Sound • Check your audio source device is turned on.
• Check that the volume is turned up.
• Check the 3.5mm connector(s) is fully inserted.
Crackling noise
and/or distortions
•Check that the volume is not set too high on audio source device.
•Ensure speakers are contacting and centered on your ears.
•Use optional foam pad spacers* if necessary.
Low volume, and/or lots
of treble
•Ensure speakers are contacting and centered on your ears and use optional foam pad spacers* if
necessary.
•Ensure volume on your device and/or the Bluetooth device is/are turned up.
* Foam pad spacers sold separately

IASUS_XSOUND 2.1_INSTRUCTION MANUAL_Revised 2020
Warranty Information
IASUS Concepts, Ltd. warrants that the XSound 2.1 Helmet Speakers sold by IASUS Concepts or its authorized
agents is free from defects in materials and workmanship under normal use for one year. This warranty is only
applicable to the original purchaser in possession of a dated sales receipt that includes the name for the company
from which it was purchased. This warranty is in lieu of and excludes all other warranties, expressed or implied,
including any implied warranty of merchantability or tness, and of any other obligation on the part of IASUS
Concepts, Ltd.
-Damage from improper operation, misuse, neglect such as dropping the product onto hard surfaces, contact with
extreme humidity or heat, or acts of nature (lightning, oods, power surges, etc).
-Product that may have been tested, adjusted, installed, maintained, repaired or altered in any way by persons not
expressly approved by IASUS Concepts, Ltd.
-Cables that are stretched, burned, torn, or cut.
-Products purchased more than 12 months previous to the current date.
-Products that are not accompanied by a valid proof of purchase.
You must register your product to receive warranty service. To do so and to view detailed information about our
warranty service, please visit iasus-concepts.com
Visit iasus-concepts.com/warranty to contact us with any warranty inquiries. To be eligible for warranty service,
please be able to provide a copy of your dated purchase receipt for IASUS to conrm warranty status. IASUS highly
suggests retaining the original copy of your proof of purchase for your records.
1-Year Limited Warranty
What This Warranty Does Not Cover
Registering For Warranty
Receiving Warranty Service
Visit our Youtube channel for video tutorials
Follow us on social media