IBA ibaMS8xIEPE User manual

ibaMS8xIEPE
Input module for IEPE vibration sensors
Manual
Issue 1.3

Manufacturer
iba AG
Koenigswarterstr. 44
90762 Fuerth
Germany
Contacts
Head office [phone]
Fax [phone]
Support [phone]
Technology [phone]
E-Mail: [e-mail]
Web: www.iba-ag.com
This manual must not be circulated or copied, or its contents utilized and disseminated, without
our express written permission. Any breach or infringement of this provision will result in liability
for damages.
© iba AG 2020, All rights reserved.
The content of this publication has been checked for compliance with the described hardware
and software. Nevertheless, deviations cannot be excluded completely so that the full compli-
ance is not guaranteed. However, the information in this publication is updated regularly. Re-
quired corrections are contained in the following regulations or can be downloaded on the Inter-
net.
The current version is available for download on our web site www.iba-ag.com.
Windows®is a label and registered trademark of the Microsoft Corporation. Other product and
company names mentioned in this manual can be labels or registered trademarks of the corre-
sponding owners.
Certification
The product is certified according to the European standards and directives. This product meets
the general safety and health requirements.
Further international customary standards and directives have been observed.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pur-
suant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harm-
ful interference when the equipment is operated in a commercial envi-ronment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in residential
area is likely to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
Issue
Date
Revision
Chapter
Author
Version
HW / FW
1.3
07/24/2020
Technical data

ibaMS8xIEPE
Manual
Issue 1.3 3
Table of contents
1About this manual........................................................................................... 5
1.1 Target group ..................................................................................................6
1.2 Notations .......................................................................................................6
1.3 Used symbols................................................................................................7
2Introduction ..................................................................................................... 8
3Scope of delivery ............................................................................................ 9
4Safety instructions.......................................................................................... 9
4.1 Proper use.....................................................................................................9
4.2 Special safety instructions .............................................................................9
5System Requirements .................................................................................. 10
5.1 Hardware.....................................................................................................10
5.2 Software ......................................................................................................10
6Mounting, Connecting, Dismounting .......................................................... 11
6.1 Mounting......................................................................................................11
6.2 Connecting ..................................................................................................11
6.3 Dismounting................................................................................................. 11
7Device description ........................................................................................ 12
7.1 View.............................................................................................................12
7.2 Indicator elements .......................................................................................12
7.2.1 Operating status ..........................................................................................12
7.2.2 Status of IEPE inputs..................................................................................13
7.3 Analog inputs...............................................................................................13
7.3.1 Filter ............................................................................................................14
7.3.2 Connection diagram / pin assignment..........................................................15
7.3.3 Error and status signals ...............................................................................16
8Start-up / Update ........................................................................................... 17
8.1 Auto-Update ................................................................................................17
8.2 Overall Release Version ..............................................................................17
8.3 Update.........................................................................................................17
8.3.1 Update via Web Interface ............................................................................18
8.3.2 Update via ibaPDA ......................................................................................18
8.4 Module Information / Diagnostics.................................................................19
8.4.1 Diagnostics..................................................................................................19
8.4.2 Web Interface ..............................................................................................19
9iba Applications ............................................................................................ 21
9.1 Configuration in ibaPDA...............................................................................21
9.1.1 General settings ..........................................................................................21
9.1.2 Configure inputs ..........................................................................................23
9.1.3 Error and status signals ...............................................................................24
9.2 Configuration with ibaLogic-V5 ....................................................................26
9.2.1 Configuring signals ......................................................................................26

Manual
ibaMS8xIEPE
4
Issue 1.3
10 Technical Data............................................................................................... 29
10.1 Main data .................................................................................................... 29
10.2 Analog inputs .............................................................................................. 29
10.3 Dimensions ................................................................................................. 31
11 Support and contact..................................................................................... 32

ibaMS8xIEPE
Manual
Issue 1.3 5
1 About this manual
In this manual, you learn a lot about the design of the ibaMS8xIEPE device and how to
use and operate it. You can find a general description of the iba-modular system and
further information about the design of the central units and how to use and operate them
in separate manuals.
Note
The documentation for the iba-modular system is part of the DVD that is included in
delivery.
The documentation of the iba-modular system comprises the following manuals:
Central units
The manuals of the central units, e.g. ibaPADU-S-IT-2x16 and ibaPADU-S-CM, con-
tain the following information:
Scope of delivery
System requirements
Description of the device
Mounting/Demounting
Start-up
Configuration
Technical data
Accessories
Modules
The manuals for the single modules contain specific information about the module.
There are the following information classes:
Short description
Scope of delivery
Product characteristics
Configuration
Description of the functions
Technical data
Connection diagram

Manual
ibaMS8xIEPE
6
Issue 1.3
1.1 Target group
This manual addresses in particular the qualified professionals who are familiar with han-
dling electrical and electronic modules as well as communication and measurement tech-
nology. A person is regarded to as professional if he/she is capable of assessing safety
and recognizing possible consequences and risks on the basis of his/her specialist
training, knowledge and experience and knowledge of the standard regulations.
1.2 Notations
In this manual, the following notations are used:
Action Notations
Menu command Menu Logic diagram
Call of menu command Step 1 – Step 2 – Step 3 – Step x
Example:
Select menu Logic diagram – Add – New logic
diagram
Keys <Key name>
Example: <Alt>; <F1>
Press keys simultaneously <Key name> + <Key name>
Example:
<Alt> + <Ctrl>
Buttons <Button name>
Example:
<OK>; <Cancel>
File names, Paths „File name“, „Path”
Example:
„Test.doc“

ibaMS8xIEPE
Manual
Issue 1.3 7
1.3 Used symbols
If safety instructions or other notes are used in this manual, they mean:
The non-observance of this safety information may result in an imminent risk of death
or severe injury:
•By an electric shock!
•Due to the improper handling of software products which are coupled to input and
output procedures with control function!
If you do not observe the safety instructions regarding the process and the system or
machine to be controlled, there is a risk of death or severe injury!
The non-
observance of this safety information may result in a potential risk of death or
severe injury!
The non-
observance of this safety information may result in a potential risk of injury or
material damage!
Note
A note specifies special requirements or actions to be observed.
Important note
Note if some special features must be observed, for example exceptions from the rule.
Tip
Tip or example as a helpful note or insider tip to make the work a little bit easier.
Other documentation
Reference to additional documentation or further reading.

Manual
ibaMS8xIEPE
8
Issue 1.3
2 Introduction
The ibaMS8xIEPE module is member of the iba-modular system. The modular concept
of the iba-modular system is designed on the basis of a backplane. You can plug on this
backplane not only the CPU, but also up to 4 input/output modules. The power supply of
the I/O modules is provided by the backplane bus.
The ibaMS8xIEPE module offers 8 analog inputs
In brief:
I/O module for the iba-modular system
8 analog inputs
Galvanically isolated groups of 2 inputs each
Constant current source 4 mA
Typically for IEPE vibration sensors
Detection of broken line and short circuit
Analog and digital anti-aliasing filter
Synchronous sampling
4 channels can be configured as ±24 V voltage input
High-pass 1 Hz or 0.1 Hz can be configured
Sampling rate 1 kHz1… 40 kHz, freely adjustable
24 bit resolution
Rugged design, easy mounting
Certification according to CE
Fields of application
Measurement of mechanical vibration by means of IEPE vibration sensors:
Wind turbines
Condition Monitoring
Test benches
Monitoring of bearings
Mill chatter monitoring
1Due to the integrated filters, a minimum sampling rate of 1 kHz is recommended for the correct operation
of this module, even if an even lower sampling rate (time base) can be set in the ibaPDA configuration.

ibaMS8xIEPE
Manual
Issue 1.3 9
3 Scope of delivery
After having unpacked the delivery, please check it for completeness and have a look if
the parts might be damaged.
The scope of delivery comprises:
ibaMS8xIEPE device
2 x 12-pin multi-pin connector
Manual (German and English)
DVD „iba Software & Manuals“ (only for single delivery)
4 Safety instructions
4.1 Proper use
The device is an electrical apparatus. It is only allowed to use the device for the following
applications:
Capturing of measuring data
Automation of industrial plants
Applications with iba products (ibaPDA, ibaLogic etc.)
The device is only to be applied as shown in the Technical Data.
4.2 Special safety instructions
Strictly observe the measuring
range (see Technical Data)!
Never use damaged measuring cables!
Measuring cables must NOT be attached or detached to/from the device unde
r voltage!
Modules must NOT be attached or detached to/from the rack under voltage!
Switch off the central unit or disconnect power supply before attaching/detaching the
modules
.
Important note
Do not open the device!
Opening the device leads to a loss of warranty!
Note
Clean the device only on the outside with a dry or slightly damp
and statically dis-
charged
cloth.

Manual
ibaMS8xIEPE
10
Issue 1.3
5 System Requirements
5.1 Hardware
Central unit: ibaPADU-S-IT-2x16 or ibaPADU-S-CM (version 02.12.004 or later)
Backplane unit, e. g. ibaPADU-B4S
5.2 Software
ibaPDA version 6.35.0 or later
ibaLogic-V5 version 5.0.3 or later