ICAMI CA-R11A-R User manual
IP/Network Camera
Instruction Manual
ICAMI®
Model:CA-R11A-R
Thank you for choosing our equipment. Please read the user manual
carefully before using the equipment.
Email: tidebuy2010@hotmail.com
1).Connect the camera and router with network cable.
2).Click “Search camera UID from LAN” or add the camera by manually.
Noted: Please put in the right UID, User Name and Password.
For example: UID:AAAA-255206-VMWTG
Default User Name: admin
Default password: admin
3) .When the APP show camera online, click “Wi-Fi setting” to search
your router wifi and put in the wifi password.
3. AP Wifi hotspot connection
1).Connect the camera to the power supply and antenna. NOT the
network cable.
By default, the camera will remain in AP mode.
2).Setting wifi on your phone. Search for wifi signals.
3).Choose the wifi “IPCAM-xxxxxx”.
Now, your phone is connected to the camera and has formed a local
network.
4).AP Password: 01234567
5).Open the APP-Camhi.
6).Click “Add Camera” - “Search camera from LAN ”
7).Choose a camera on the search list to add it. Enter its name and
password (default name and password are admin ).
8).After camera is online,
click button, and select “Wi-Fi
setting”.
9).Choose the SSID of wifi router. And enter password for the wifi signal.
Now the camera is connected to the wifi router.
You can revise camera parameters and playback from the phone.
Noted: In different network environment, the “Quick Setup”maybe failed,
please try to set the camera as another way.
Chapter 2 Camera Setting
Before you setup the camera, please make sure the camera is online.
1.Real-time Monitoring
Click the camera icon to open the real-time monitoring screen
2.Alarm Setting
1).Click “Setting” >> “Alarm Setting”
2) .Click "Setting">>"Action with Alarm" to open the alarm record or
another functions.
3. Record Setting
1).Turn off the camera power, install the memory card, and restart the
camera.
2).Click "Setting">> "SD Card Setting">> "Format SD Card"
3).Click "Setting">> "Recording Schedule">>open the record function
4. Edit Password
In order to protect your interests, please change the password when you
install the camera.
1) .Click "Setting">>"Change Password" >>put in your new password
and save it.
2) .After you changed the password, you need to put in the new password
to access the camera. Click "Edit" >>choose your camera>>put in the
new password and click "Done"
3) .Reset the camera. If you forget the password, keep the camera power
on and press the reset key for 15 seconds, the camera will restore to
factory setting
5. Email Setting
1) Before you set the email, you need to open the alarm function (please
refer to the "Alarm Setting")
2) Click "setting">> "Email Setting"
6. Video Interface Description
Mirror & Flip
Preset Setting & Calling
Zoom In & Out
Before using this function, please check if the device supports zoom or not.
Snapshot & Recording
Take picture or video on your phone
Video Format
The video format is HD and standard SD. The default is standard SD.
Two-way Audio
Click this button and do not release when you’re talking.
Chapter 3 PC Software
1.Download Software
Download the PC software from http://www.camhi.top
Noted: Some PC security systems do not allow downloading or installing
third-party software. Please lower the security system level before
downloading the pc software.
2.Install Software
When you install the software, please choose the English language as the
picture show.
3.PC Software Interface Description
①PTZ camera rotation(requires camera support rotation)
②Speaking to the camera side
③Listen the sound from the camera side.
④Record videos to PC
⑤Snapshot to PC
⑥Change singal-screen monitor or multi-screen monitor
⑦Local playback, playback the video which stored on the local
computer
⑧Remote playback, playback the video which stored on the camera's TF
card
⑨Close the current user
⑩Exit the software.
4. Add Device And Setting
1).Click to enter the setting interface.
2).Add the camera in local LAN, click"Search" to search all cameras in
local LAN, choose the camera and click "Add"
4) . Add camera remotely, click "Input UID">> add the cameras
manually.
Please Note:
1. The surveillance camera only supports the iOS system and the Android
system on the mobile terminal device;
2. The surveillance camera has no speakers and microphones;
3.If you want to watch the pictures or videos on phone, you need to
connect the camera and router with network cables firstly, and then make
WiFi settings (Wi-Fi Setting) in the app so that you can watch it remotely
on your mobile phone. Finally, mount camera on walls or other places;
4. If you select the AP hotspot connection, the AP hotspot name is:
“IPCAM-xxxxxx”; the password is 01234567;
5. The default account of the camera is: admin; the default password:
admin; if you forget the password, please reset the camera and press and
hold the reset button for 15 seconds.
6. If the TF card is not found, plug in the camera after turning off the
power, then press the reset button for 15 seconds to restart and reconnect
the camera.
7. When watching a video, you can choose HD mode or standard mode. It
is recommended to select HD mode to make the image clearer.
8. If you want to receive alarm information, please set "Alarm Setting"
and "Action with Alarm" in the APP.
1) Schließen Sie die Kamera über das Netzwerkkabel an Ihren Router an.
2) Klicken Sie auf "Suche Kamera-UID von LAN" oder fügen Sie die
Kamera manuell hinzu.
Hinweis: Bitte geben Sie die UID, den Benutzernamen und das korrekte
Passwort ein.
Zum Beispiel: UID: AAAA-255206-VMWTG
Standardbenutzername: admin
Standardpasswort: admin
3) Wenn die Anwendung anzeigt, dass die Kamera online ist, klicken Sie
auf " >> WLAN-Einstellung" , um Ihren WLAN-Router zu finden
und das WLAN-Passwort einzugeben.
Table of contents
Languages:
