Icemoon Camera alarm clock User manual

UserManual
Hidden CameraAlarmClock

Contents
1. OVERVIEW:BUTTONSAND LIGHTS............1
2. CONDITIONSAND PREPARATIONS..............2
2.1INSERT MICRO SDCARD.................................... 2
2.2TURNON/OFF THE CAMERA................................ 2
2.3BATTERY CHARGING.......................................... 3
2.4RESET............................................................. 4
3. PRIMARYFUNCTIONS................................4
3.1RECORD VIDEO................................................. 4
3.2TAKE APHOTO.................................................. 5
3.3MOTIONDETECTIONVIDEO RECORDING................ 5
3.4RECORD SOUND ............................................... 6
3.5VIEWWHAT YOURECORDED ............................... 6
4. USE MORE.................................................7
4.1SYNC RECORDINGTIME WITH PC......................... 7
4.2WEBCAM........................................................ 7
4.3SET CLOCKTIME ............................................... 8
5. SPECIFICATIONS.......................................13

1
1. Overview: Buttons and Lights

2
2. Conditions and Preparations
Open the backcover,and removethe plastic
slipbetween the battery and its electrode.
2.1 Insert MicroSD card
Holdgolden fingersofthe MicroSD Card
downwards,and theninsert it into theslot.
2.2 Turnon/off the camera
2.2.1Turningon:Slide theswitchto ON”. If
thereareno operations,thecamerawill turn

3
off after 2min.
2.2.2 Standbymode:Press the Power”button
ontheremoteonce,the bluelight keepson,
then the camerawill gointostandbymode. If
thereareno operations,thecamerawill also
turn off after 2min.
2.2.3 Turningoff:Pressthe Power”buttonon
the remoteagainto turnit off.
Takenote thattheclockisalwaysworkinguntil
the batteryrunsout,nomatterthe camerais
onoroff.
2.3 Battery Charging
When thepowerisweak,the bluelightkeeps
blinkingfor10sandthen the cameraturnsoff.
If the cameraisrecording,the filewill be saved
automatically when thebattery runs out.
Tocharge,usetheUSBcableto connectitto
yourPCoradapter(DC 5V).When charged by
an adapter,bothred and blue lights keep on.
Afterfully charged,the red lightwill turnoff.
It takesabout5-6 hours to get afull charge.

4
Takenote thatitcan’tworkwhen youconnect
ittoyourPC,whichmeansitwill not response
towhatyoudowiththe remotecontroller.You
can chargeitby youradapterwhen the camera
is running.
2.4 Reset
If the cameraperforms abnormally,slide the
switchto OFF”and then backto ON”toreset
it.
3. PrimaryFunctions
Functionsstatedbelowareprimaryfeaturesof
this item.Functions areeasyto set up and use.
3.1 Record video
3.1.1Turnonthecamera.Andpress the
Power”buttonontheremoteoncetoget it
into standby mode.
3.1.2 Tostartrecording:Press Video”button
onthe remote.The blue lightblinksfor3times
and thenturnsoff,whichindicatesitstarts
recording video.

5
3.1.3 Stoprecording:Press Video”button
again,theblue lightturnson,itwill
automaticallysavethe fileandgo backto
standby mode.
3.2 Takeaphoto
3.2.1Turnonthe camera.And press the
Power”buttonontheremoteonceto getit
into standby mode.
3.2.2Press Photo”button.The blue light
flashesonce;itwill takeand saveaphoto.And
then theblue lightson,itwill gobackto
standby mode.
3.3 Motiondetectionvideorecording
3.3.1Turnonthecamera.Andpress the
Power”buttonontheremoteoncetoget it
into standby mode.
3.3.2 Motiondetectionstandbymode:Press
MotionDetectionVideoRecording”button,
the blue light turnsoff.Thecameraison
motiondetectionstandby mode.
When amovement isdetected by thecamera,

6
the camerawill startcapturevideo.Itwill save
avideoevery3min.Ifnomovement detected,
the camerawill go backtomotiondetection
standby mode.
3.3.3 Stoprecording:Press MotionDetection
VideoRecording”buttonagain,the bluelight
turns on,it will go back to standby mode.
3.4 Record sound
3.4.1 Turnonthe camera. And press the
Power”buttonontheremoteonceto getit
into standby mode.
3.4.2 Startrecording:Press Sound”button,
the bluelightwill blinkfortwiceand then
disappear,it will start recording sound.
3.4.3 Stoprecording:Press Sound”button
again,thebluelight appears,itwill gobackto
standby mode.
3.5 Viewwhatyourecorded
3.5.1 Poweroff the camera.
3.5.2 Connectthe cameratoyourcomputervia
USBcable,aremovabledisk will appear,which

7
meansitgoesintoU-discmode,just likewhen
youinsertacardreaderintoyourPCUSBport.
Justopenit,youwill find what youhave
recorded.
Also,youcan removeMicroSD cardfrom the
camera,and useyourcardreadertoconnectto
yourcomputer.
4. UseMore
The followingareadditionalfunctionsofthe
camera.Thefunctionsstatedbelowarenot
easytoset up and use.Justfollowup thesteps
accordingly.
4.1 Sync recording timewithPC
Takenote thatyoushouldsyncrecordingtime
withPCbeforerecordingvideo.Youjustneed
to do it once.
4.1.1 Turnoffand connectthecameratoyour
PCviathe USB cable,it will go into U-discmode.
Open the MicroSDcard,create aTXTfileinit,
and renameitto Time”.

8
4.1.2 Open the TXTfile,type inthetimeas
followingformatand then savethe file:
[Year/Month/Date]<A spaceis
required>[Hour:Minute:Second]
Forexample,
2016/06/01 12:00:00
Then,disconnectthecamerafrom yourPC,
turniton,thecamerawill automaticallysync
the time.
4.2 Webcam
4.2.1 Connectthe cameratoyourcomputervia
USBcable,it will go into U-discmode.
4.2.2Press Power”buttonontheremote
controllerto get it intoPCcamera.
4.2.3 Open the captureapplication Camera”in
YourComputer”,youwill seethereal-time
videoitiscapturing.Thenyoucanuseitfor
video chats.
4.2.4 Press Power”buttonagain,itwill return
to U-discmode.
4.3 Setclocktime