iClever IC-DK03 User manual
@iclever
Multi-Device Dual-Mode
Ultra Slim Wireless Keyboard
IC-DK03
User Manual
Thank you for choosing iClever! Please read this user manual carefully and
save it for future reference.
1x Wireless Keyboard
1x 2.4G USB Receiver (for 2.4G connection only)
1x Keyboard Cover
1x Micro USB Charging Cable
1x User Manual
[Specifications
:'.>t
Connection
Operating distance
Dimensions
Net weight
Lithium battery capacity
Charge time
Uninterrupted working time
Stand-by time -
Compatibility
•Frequency band: 2402 MHz-2480 MHz
*Maximum
transmission
power
:0
dBm
2.4G Wireless and Bluetooth
< 8m / 26ft
428*125*16mm / 16.85 *4.92 *0.63in
428g
280mAh
< 2 hours
90 hours
90 days
Windows, Mac, iOS, Android
-1-
Indicator Lights
Descriptio11
® Charging Indicator
~
@Caps lock Indicator
~~~~
2
4G
w,rel
: s8
~;:;;;,;~;;;;,,arnm,
0
6q_(1c
//#-+------------
(?1)
(J)
Micro Charging Port
(!) Power Switch: slide right to turn on and left to turn off.
@®
Bluetooth Channel Indicator: to indicate the Bluetooth channel 1/
2.
@ 2.4G Wireless Channel Indicator: turn green for 3s after switching to the 2.4G
wireless mode.
® Caps lock Indicator: press "caps lock" key
to
switch between uppercase and
lowercase. Press "F6" key to check the power reminding, and the indicator light flashes
once, twice, three times, and four times to indicate that the power
is
less than 25
%,
60
%,
75
%,
and 100
%.
® Charging Indicator:
it
stays
in
red
while charging.
(J)
Micro Charging Port:for charging.
-2-
Pairing
Instruction
A.
2.4G Wireless Connection
Step
1.
Plug the 2.4G USB receiver into the port
of
the computer.
Step
2.
Slide power switch right to power on the keyboard.
Step 3. Press the key
of
D to switch to 2.4G wireless mode, and the
indicator will turn green for 3 seconds.
Step 4. Press
fn
+ Q/W
to
choose system (fn+Q
is
for iOS and Mac OS,
and fn+W
is
for Windows and Android)
-·
-----
-
-----
..,,.,
,.,...-----
-
-------
.......
lffail
to connect, please try as below:
Step
1.
Slide left to turn off and then slide right to turn on the keyboard.
Step
2.
Press the key
of
D to switch to 2.4G mode.
Step 3.Hold and press keys
of
~
+
LJ
for 5 seconds until the 2.4G
indicator quickly flashing green.
Step 4.Immediately plug the 2.4G USB receiver into the computer within 1
Os
and keep the keyboard close to the receiver within 30cm
(0
.98 ft).
Step 5.The 2.4G indicator will turn to be green for 2 seconds and then turn
off after connection successfully.
NOTE: Keep the keyboard off the ground.
B.
Bluetooth Wireless Connection
Pair with 1
st
device
Step 1. Slide power switch right to power on the keyboard.
Step
2.
Hold and press the key
of
G for 5 seconds to pairing mode
in
channel 1, and the Bluetooth channel 1 indicator will quickly flash blue and
start to search for the available Bluetooth device.
Step 3. On your Bluetooth device, find the Bluetooth name " iClever IC-DK03
KB
" and click to connect
it.
For example, for iPad, click "Settings" > "Bluetooth" >
Under "MY DEVICES" find pairing name and click to connect
it.
-3-
Step
4.
The Bluetooth Channel indicator will be off after successfully paired.
Step
5.
Press "fn" + "Q"/"W" keys to choose the system.
(fn+Q
is
for iOS and Mac OS, and fn+W
is
for Windows and Android}
Pair with 2
nd
device
Step 1.Slide right to power on the keyboard.
Step
2.
Hold and press the key
of
G for 5 seconds to pairing mode
in
channel
2,
and the Bluetooth channel 2 indicator will quickly flash
blue and start to search for the available Bluetooth device.
Step
3.
On your Bluetooth device, find the Bluetooth name " iClever
IC-DK03 KB" and click
to
connect
it.
Step
4.
The Bluetooth Channel indicator will be off after successfully paired.
Step
5.
Press "fn" + "Q"/"W" keys to choose the system
(fn+Q
is
for iOS and Mac OS, and fn+W
is
for Windows and Android}
Step
1.
Delete the connection records with iClever keyboard.
For example for iPad. click "Settings" > "Bluetooth" > under "MY DEVICE"
to delete the iClever keyboard connection record.
Step
2.
Turn off the Bluetooth and turn it on again to Refresh.
For example, for iPad. click "Settings" > "Bluetooth" > if the on-screen
switch beside Bluetooth currently show as ON. tap it twice to refresh
it.
Step
3.
Connect it again.
C.
Switch among connected devices.
Press the key
of
EJ
/
~
/G to switch among connected devices.
D.
Re-pair the Bluetooth that has already connected.
Hold and press the key of G I G for 5 seconds again to re-pair.
-4-
Before to use, please ensure that you already choose the right system:
fn
+ Q is for iOS and Mac
OS
and
fn
+Wis
for Windows and Android.
Your keyboard has by default access to the Media and Hotkeys such
as
Volume
Up,
Play/Pause, Volume down, and
so
on. If
you
prefer to have direct
access to F-keys simply press
CD
on
your keyboard to swap them.
Key Icon iOS Android Windows Mac
OS
Windows
& Mac
OS
Way
to
use Press F-keys Press F-keys Press F-keys Press F-keys Press fn +
Directly Directly Directly Directly
F1-F12
u Brightness -Brightness -Brightness -Brightness -
F1
'
(Windows
10)
~
Brightness + Brightness + Brightness + Brightness + F2
' (
Windows
10)
~
N/A Home
or
N/A Web browser Mission control F3
~
Switch apps (not Switch apps Switch apps Switch apps F4
work
for
iPhone)
orN
/A
E]
Search
Search
or N/A Search Search F5
~
Battery Battery Battery Battery F6
6 checking checking checking checking
u7 Previous·track Previous track Previous track Previous track F?
~
' Play/pause Play/pause Play/pause Play/pause F8
b]
Next track Next track Next track Next track F9
Q 0 Mute Mute Mute Mute F10
~
'
Volume-
Volume -
Volume- Volume-
F11
~
'
Volume+
Volume+ Volume+ Volume+
F12
-5-
Special Key iOS Android Windows Mac OS
Way to use Press directly Press directly Press directly Press directly
[!]
Screen lock Screen lock Screen lock Screen lock
or N/A
B Switch function: press this key
to
2.4G mode.
Switch function: press this key to Bluetooth channel
1.
G Pairing function: hold and press this key for 5 seconds and the
Bluetooth channel 1 indicator will quickly flash blue and start to
search for the available Bluetooth device.
Switch function: press this key to Bluetooth channel
2.
~
Pairing function: hold and press this key for 5 seconds and the
Bluetooth channel 2 indicator will quickly flash blue and start
to
search for the available Bluetooth device.
[:!]
Fn
lock function: press this key to swap function between the
F-keys (F1-F12) and Media keys.
~
If your system
is
Mac or iOS, press fn + this key to Mac layout.
[SJ
If you system
is
Windows or Android, press
fn
+ this key to
Windows Layout.
§]
It works as "win" when your system switch
to
Windows layout.
It
works as "option" when the system switch to Mac layout.
~
It
works as "alt" when your system switch to Windows layout.
. It works as "cmd" when your system switch to Mac layout.
0
It
works as input method change.
(note: work for Win10 iOS and Mac onl~)
It works
as
"number lock" when your system switch to Windows
~
Layout.
It
works
as
"clear" when your system switch
to
Mac Layout.
. (note: not work for iOS and Android)
-6-
I
S!eep
1Mode
!':s
The keyboard will enter sleep mode if idle for 30 minutes.
Press any key to exit sleep mode and wait for 3 seconds.
Char9e1:he
Keyboard
Charge the device with the included USB cable.
---- Output: DC 5V/200mA; USB charger
is
not included.
----
In
the charging, the indicator will slay
in
red. Generally, it takes about 2
hours to get fully charged.
1. For Bluetooth Compatibility: Windows 8/8.1 /1OPC and laptop with
Bluetooth host, Mac, Android, iOS.
Note: it
is
not fully compatible with Mac mini. smart TV and Xbox.
2.
For 2.4G Wireless Compatibility: Windows 7/8/8.1/10 PC and laptop.
Q:
Is
this keyboard fully compatible with Macbook/iMac?
A:
No, it is not fully compatible. The keys
of
B
BB
are not
working for Macbook and iMac.
Q:
Is
this keyboard fully compatible with iPhone/iPad?
~ ~
r,::~i
O 0
A:
No, it is not fully compatible. The keys of
~
L.'.:'.:_J
L:J
D D
0
r;;:;;;i
.
L.:J
~
are not working for iPhone and iPad.
-7-
Q:
How
to enable direct access to F-keys or how to make
F1-F12
keys
work
correctly.
A:
Your
keyboard has by default access to the Media and Hotkeys such as
Volume
Up, Play/Pause, Volume down, and so on.
If
you prefer
to
have direct access to your F-keys simply press key
of
~
on your keyboard to swap them.
Q:
My keyboard fails to connect by 2.4G mode.
• Ensure you already press the key
of
B .
• Verify the product
or
receiver is connected directly to the
computer
and
not to a hub, extender, switch,
or
something similar.
• Charge keyboard for 30 minutes.
• Move the receiver
to
a different
USB
port on
your
computer.
• Try on a different
computer
.
• Read above "Pairing Instruction" to re-pair
your
keyboard.
Q:
My
keyboard fails to connect by Bluetooth mode.
• Ensure the device you are trying to pairwith is Bluetooth wireless-capable.
• Delete/remove previous Bluetooth connection record and turn
off
the
Bluetooth function on
your
devices and turn it on again.
• Ensure you already hold and press the button
of
~
/ G for 5
seconds until the indicator flashing blue.
• Charge the keyboard for 30 minutes.
• Try a different device.
Q:
Delay typing
in
Win 10.
1. Use Windows shortcut keys Win + R to open Run.
,2.
Type
into control and hit the Enter key. This will launch Control Panel.
(Note: If you cannot type into the proper letters, it is recommended
to
use the on-screen keyboard.)
3.
View
by Small icons. Click the Keyboard.
-8-
4.
In
Keyboard Properties,
adjust the slider
of
Repeat
delay to an appropriate
situation that is close to Long.
Adjust the slider
of
Repeat rate
to
an appropriate situation that
is close to
Slow
.
5.
Click the Apply and the
OK
button to save the changes.
Restart the computer and try
typing a word to see
if
the
double
or
multiple letters issue
still persists.
Q:
Keyboard frequently get disconnected, keyboard get laggy when
typing, key gets stuck
or
responds intermittently, device connection
drops, device cannot be connected at
.:111.
Troubleshooting Checklist
1. Restart your Bluetooth device.
2. Make sure that
your
iClever device and
computer
are within close
proximity
of
each other.
3. Try moving
away
at least 8 inches (20
cm)
from metal and other sources
of
wireless signal. Try moving
away
from:
----
Any
device that could emit wireless waves: Microwave, cordless phone,
baby monitor, wireless speaker, garage
door
opener, WiFi router
----
Computer
power
supplies
---- Metal
or
metal wiring in the wall
-9-
4.
Do not use your wireless keyboard on metal surfaces.
5.
Charge your iClever keyboard for 30 minutes. Low battery power can
adversely affect connectivity and overall functionality.
6.
Check ifthere are any updates running
in
the background that may cause
the delay.
7.
Make sure your operating system (OS) is
up
to date.
8.
Try on a different computer/smartphone/tablet.
If the problem still persists, you will need to contact us follow specific
steps based on your device operating system.
Q:
How
to Fix Keyboard Typing Multiple Letters on Windows 10.
Turn on the Filter Keys:
Click win key>Settings>Ease
of
Access>Keyboard>find "Use Filter Keys
",
turn it on.
Q:
How to Fix Keyboard Typing Multiple Letters on Mac.
1.
On a Mac, choose the Apple menu > "System Preferences", click
"Keyboard", and choose the Keyboard tab.
2.
Locate the "Key Repeat" slider setting and adjust it to the "Off' position.
Q:
Is this keyboard waterproof and dustproof?
No, it is not.
If liquid or snacks enters the keyboard, it may cause malfunctions
Keep away from oil, chemical, luquid, and snacks.
Keep away from sharp objects.
Keep away from metal and other sources
of
wireless signal.
-10-
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used
in
accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in
a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can
be
determined by turning the
equipment off and on, the user
is
encouraged to try to correct the interfer-
ence by one or more of the following measures:
---- Reorient or relocate the receiving antenna.
---- Increase the separation between the equipment and receiver.
---- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
---- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Email: [email protected]
-11-
Other iClever Keyboard manuals
