Icop VSX-6115 User manual
VSX-6115
DM&P Vortex86SX 300MHz
Tiny CPU Module
with 4S/2USB/LAN/2GPIO 128MB DDR2 Onboard
User’s Manual
(Revision 1.2A)
Copyright
The information in this manual is subject to change without notice for continuous improvement in
the product. All rights are reserved. The manufacturer assumes no responsibility for any
inaccuracies that may be contained in this document. And makes no commitment to update or to
keep current the information contained in this manual.
No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part,
in any form or by any means without the prior written permission of the ICOP Technology Inc..
Copyright 2007 ICOPTechnology Inc.
Manual No. IUM6115000-01 Ver.1.0A September, 2007
Manual No. IUM6115000-01 Ver.1.1A December , 2007
Manual No. IUM6115000-01 Ver.1.2A February, 2008
Trademarks Acknowledgment
Vortex86SXis the registered trademark of ICOP Technology Inc.
Other brand names or product names appearing in this document are the properties
and registered trademarks of their respective owners. All names mentioned herewith
are served for identification purpose only.
T a b l e o f C o n t e n t s
T ab l e o f C o n t e nt s.............................................................iii
C h a p t e r 1 Introduction……………………………………………1
1.1 Packing List............................................................1
1.2 Product Description................................................1
1.3 Specifications.........................................................3
1.4 Board Dimension....................................................4
C h a p t e r 2 Installation……………………………………………..5
2.1 Board Outline.........................................................5
2.2 Connectors & Jumpers Location............................6
2.3 Connectors & Jumpers Summary...........................8
2.4 PinAssignments & Jumper Settings.......................9
2.5 System Mapping...................................................15
2.6 Watchdog Timer.....................................................18
2.7 GPIO......................................................................19
2.8 SPI Flash...............................................................20
C h a p t e r 3 Driver Installation……………………………………21
Warranty............................................................................................22
Vortex86SX-6115 Vortex86SXTiny CPU Module
1
C h a p t e r 1
Introduction
1.1 Packing List
Product Name Package
VSX-6115
Embedded Vortex86SX CPU All-in-One Board
Manual & Drivers CD x 1
RS232 cable x 4
PRINTER cable x1
IDE cable x 1
USB cable x 1 (USB port x 2)
GPIO cable x 2
PS/2 Keyboard cable x 1
Vortex86SX-6115 Vortex86SXTinyCPUModule 2
1.2 Product Description
The VSX-6115 family of low-power x86 embedded controller is designed to meet Tiny
specification, and integrated with the following features.
300 MHz Vortex86SX System-On-Chip
128MB DDR2 system memory
Enhanced IDE (UltraDMA-100/66/33)
10/100Mbps Ethernet
2 USB 2.0 (host)
Up to 4 serial ports
Parallel port
16-bit GPIO x2
x-ISAbus
RS-485 withAuto Direction
2 watchdog timer
3 PWM channels
JTAG interface
AMI BIOS
2MB SPI flash
Single voltage +5V DC
Support extended operating
temperature range of -20°C to +70°C
The VSX-6115Tiny family of embedded controller is designed with backward compatibility in
mind, to provide migration path for projects facing end-of-life challenges with their existing x86
based Tiny controller. The VSX-6115 family of controller is designed as a plug in replacement,
with backward compatibility to support legacy software to help extend existing product life cycle
without heavy re-engineering.
VSX-6115 is suitable for broad range of data-acquisition, Industrial automation, Process control,
Automotive controller,AVL, Intelligent Vehicle management devic,Medical device, Human
machine interface, Robotics, machinery controlAnd more…application that required small
footprint, low-power and low-cost hardware with open industry standard such asTiny.
Vortex86SX-6115 Vortex86SXTiny CPU Module 3
1.3 Specifications
Features VSX-6115
CPU DM&P SoC CPU Vortex86SX- 300MHz
Real Time Clock with Lithium Battery Backup
Cache L1:16K I-Cache, 16K D-Cache
BIOS AMI BIOS
Bus Interface 16-bit x-ISA interface
System Memory 128MB DDR2 onboard
Watchdog Timer Software programmable from 30.5 us to 512 seconds x2
sets(Watchdog 1 fully compatible with M6117D)
LAN Integrated 10/100M Ethernet
I /O Interface Enhanced IDE port (UltraDMA-100/66/33) x1
RS-232 port x3
RS-232/485 port x1 (RS485 with Auto Direction)
Parallel port x1
USB port x2 (USB 2.0 version)
16-bit GPIO port x2
10/100Mbps Ethernet port x1
Connectors 2.00 mm 44-pin box header for IDE x1
2.00 mm 26-pin box header for Printer x1
2.00 mm 20-pin box header for 16-bit GPIO x2
2.00 mm 10-pin box header for RS-232 x4
2.00 mm 10-pin box header for USB x1
2.54 mm 3-pin header for RS-485 x1
2.54 mm 5-pin box header for keyboard x1
2.54 mm 2-pin header for Reset x1
1.25mm 6-pin Wafer for JTAG x1
External RJ-45 connector for Ethernet x1
Flash Disk Support
Onboard 2MB SPI Flash Disk (Driver: A)
44-pin IDE Flash Disk( EmbedDisk 16MB or above)
Power Requirement Single Voltage +5V @360mA
Dimension 100mm X 66mm (3.94 x2.6 inches)
Weight 63g
Operating
Temperature -20oC ~ +70oC
-40°C ~ +85°C (Optional)
Vortex86SX-6115 Vortex86SXTiny CPU Module 4
1.4 Board Dimension
Vortex86SX-6115 Vortex86SXTiny CPU Module 5
C h a p t e r 2
Installation
2.1 Board Outline
Note: VGA function support (ICOP-2720) via x-ISA Interface
ICOP-2720: http://www.icop.com.tw/products_detail.asp?ProductID=9
Vortex86SX-6115 Vortex86SXTiny CPU Module 6
2.2 Connectors & Jumpers Location
Connectors
Vortex86SX-6115 Vortex86SXTiny CPU Module 7
Jumpers & LEDs
Table of contents
Other Icop Processor manuals
