ICT cc6100 User manual

CC6100 Quick Start Guide
Coin Changer
series
International Currency Technologies Corp.

Use of Materials Limitations
International Currency Technologies Corporation (ICT) all rights reserved.
All materials contained are the copyrighted property of ICT.
All trademarks, service marks, and trade names are proprietary to ICT.
ICT reserves the right at all times to disclose or to modify any information as
ICT deems necessary to satisfy any applicable law, regulation, legal process
or governmental request, or to edit, refuse to post or to remove any information
or materials, in whole or in part, in ICT's sole discretion.

Contents
CC6100
...................................................................................... 21. Before use
2. Installation
2-1. Device Mounting Instruction.......................................................3
2-2. Tube Cassette Refill Instruction..................................................4
2-3. Installation Checklist...................................................................4
2-4. Initialization Checklist.................................................................6
3. Wiring
.......................7 3-1. Wiring for CC6100 JPSTD Model or MDB Model
3-2. Wiring for CC6100 Executive & MDB Model..............................7
4. LCM Module Description.................................................................8
4-1. LCM Main Menu Table................................................................8
5. DIP Switch Setting
5-1. DIP Switch Setting for JPSTD, MDB........................................12
5-2. DIP Switch Setting for EXECUTIVE.........................................13
5-3. DIP Switch Setting for CC6100SA............................................14
6. Error Message................................................................................15

1. Before use
Package Contents :
Dear Valuable customer, thank you for purchasing CC6100. CC6100
features six modular coin tubes to provide the highest level of flexibility
in managing payout combinations. Japan Standard Communication
Interface (JPSTD), MDB and Executive interface are available, to
support multiple applications.................................................................
CC6100 with one of the following wire harness
WEL-RCC23 Power and Data Communication cable for MDB.
 WEL-RCC24 Power and Data Communication cable for JPSTD.
WEL-RCC72 & WEL-RCC54 Power and Data Communication
cable for CC6100 Executive & MDB.
Quick Start Guide
CC6100 Installation instructions can be downloaded at:
Select “Support” from menu, then select “Manual Download”.
-2-
CC6100
www.ictgroup.com.tw

-3-
2. Installation
2-1. Device Mounting Instruction
Attention!! Prior installation, please remove the coin changer from
the carton and inspect for damages.
Attention!! Turn off VMC Power during installation-IMPORTANT!!!
Warning!! Do not plug both MDB and Executive connector to VMC
board simultaneously!! It may cause damage of VMC board.
1. Press the green hook at the left side
of the coin changer and tilt the upper
module.
2. Unplug flat cable to separate upper
module from device.
3. Loosen the 3 mounting screws 2 or 3
turns.(do not unscrew these completely)
Lift the coin changer to mount inside
the vending machine.
4. Tighten the screws and place the upper
module back to the device.
5. Plug flat cable back to upper module
then close the upper module till it firmly
fixed by green hook.
Plug device power and communication
cable to vending machine.
Flat cable
CC6100

2-2. Tube Cassette Refill Instruction
1. Press the green cassette fixed
latch to pull out the cassette at
an upwardly slanted angle.
2. Refill coins into tube cassette
and ensure that the coins enter
the corresponding tubes and
flatly placed. Then place the
tube cassette back to Changer.
*You may choose coin refill mode to fill coins without open tube
cassette.
Latch
2-3. Installation Checklist
Check that there is a 3 to 5 mm gap between
the coin changer return lever and the vending
machine return mechanism. 3-5 mm
-4-
CC6100

Check that when vending machine return
lever has been pressed and released, the
reject gate of the coin recognition module
can be opened and closed properly.
Check that the coin insertion, coin return box,
and coin storage box channels of the vending
machine line up with the corresponding slots
of the coin changer. If the
slot has not been lined up,
please adjust accordingly.
return
mechanism
Insert a coin to check whether it can pass
through the coin changer successfully.
Please ensure that there is no interference
around the coin recognition module.
-5-
CC6100

2-4. Initialization Checklist
While vending machine in an energized state,
please DO NOT plug/unplug any wires on
CC6100.
Please ensure that there are no interferences
between the connected wires, the coin insert
and return device, and the door of the automatic
vending machine. After the inspections are
complete, then turn on the vending machine
power.
Check the amount of coins in each coin tube is
above the minimum requirement level. Please
refer to sticker on the tube cassette for minimum
level information. (The coin changer would not
work correctly without enough coins in the coin
tubes.)
After refill of tube cassette, the coin changer will
detect the adequate coin quantity within a few
seconds.
Dispense at least 1 coin from each coin tube to
ensure that the dispensed coins fall into the coin
return box of the vending machine.
X
-6-
CC6100

3. Wiring
3-1. Wiring for CC6100 JPSTD Model or MDB Model
3-2. Wiring for CC6100 Executive & MDB Model
ICT Coin Changer provides the MDB or JPSTD cable only. Please let your
sales representative know to your vending machine needs.
VMC JPSTD
VMC Executive
ICT-BA JPSTD
ICT-BA MDB
VMC MDB
VMC MDB
ICT-BA MDB
WEL-RCC24
WEL-RCC54
WEL-RCC48
WEL-RCC72
(MDB Peripheral)
CC61000
JPSTD or MDB
CC6100 Executive
&
MDB
WEL-RCC23
WEL-RCC72
(MDB)
WEL-RCC67
Warning!! Do not plug both MDB and Executive connecter to VMC board
simultaneously!! It may cause damage of VMC board.
-7-
CC6100

4. LCM Module Description
4-1. LCM Main Menu Table
KEY KEY
Operation functions
A
Code
100
101
115
129
LCM Menu Display
Refill Coin
Total In/Out
Clear Tube Count
Language
Function Description
Accessible without password.
Cash Flow Mode only.
Accessible without password
Accessible without password
Accessible without password
Coin Refill Function by Coin
Insertion under Cash Flow Mode.
Check the Total Coin PayIn and
PayOut Value Counter.
Clear Counting Memory of All
Coin Tube Inventory.
Set language.
B
C
D
E
F
Manual
Function Function
Tube A, move left
Tube B, move upward
Tube C, move right
Tube D, back
Tube E, move downward
Tube F, enter
Enter main menu
Keys
Download Port
LED Indicator
LCM
IrDA
(CC6100S/CC6100E)
To access all menu functions requires password verification. Press “D” 3 times under main menu
to open password input page. Default Password is ABCD. See next page for complete menu
functions.
-8-
CC6100

Setting Functions
Code
102
103
104
107
108
109
110
111
112
113
116
117
118
119
120
121
122
123
124
126
125
LCM Display
Reset Records
Accept/ Reject Coin
Switch
Tube Open/
Close Switch
Configure Cash Float
Activate Cash Float
Check Current Cash
Float
Change Mgmt.
Idle Display
BA Type Setting
Default Setting
Cassette Type
Error Info
Bill(s) per Transaction
CashFloat Mode
Set ID
Coin->CashBox Setting
Expansion Escrow
Setting
Sensor Inventory
Adjustment
Reserved Coin
Accessibility options
Refill Coin Inventory
Function Description
Special Function,
only for NTD
Cash Flow Mode only
Cash Flow Mode only
Cash Flow Mode only
Cash Flow Mode only
Special Function
ICT BA only
Clear the Total Coin PayIn and PayOut Value
Record.
Set Accept or Reject to Coin Denominations.
Set Open or Close to Coin Tubes.
Set Cash Float Configuration for Various
Coin Denominations.
Set Cash Float Type for Various Coin
Denominations.
Check Current Cash Float of Various Coin
Denominations.
Set the Change Return Mode.
Set the Standby LCM Display Mode.
Set the BA Interface.
Restore to Default Factory Settings.
Coin Tube Configuration Mode.
Display Error Message Records.
Set the Bill Acceptance Limitation for the BA.
Set Coin Tube Inventory Counting Mode.
Set Customer & Machine Number.
Set Coin Acceptance to Cash Box Condition.
Set Escrow for NTD 50.
Detect Tube Inventory.
Set Reserved Coin Function.
Set LCM accessibility under door-switch
status and password security.
Refill Coin Inventory function by inserting
coins into tube cassette directly.
-9-
CC6100

Setting Functions
Code
131
LCM Display
Acceptance limit For
Changer
Function Description
Only MDB for KRW
Set Credit Acceptance Limit.
132 Maximum for Insert Q'TY Only MDB for KRW
Set limitation of coins in single
transaction.
137
133
138
Refill Option
Decimal and Scaling
Channel sequence
Only for Indonesia
Only for Russia
For MDB & Executive
Setting Refill Option.
Set Decimal point and Scaling Factor.
Setting Channel sequence.
135
140
136
141
142
Error Report
EVA-DTS ID data
Payout Method
Bill Escrow Return
Sorting Module Testing
Setting Error Report Function.
Setting EVA-DTS ID.
Setting Payout Method(Level 2).
Setting Bill Escrow Return.
Setting Tube Test Mode.
134
139
143
Currency Code
IDR credit
Tube Detection(after sale)
Setting Currency Code.
Setting Indonesia Credit.
Setting Tube Detection Function.
Only for UAH, USD, EUR
Only for SGD, MYR, THB
Only for THB
Only for THB
JPSTD-TWD and THB
144
146
147
148
149
150
151
152
153
154
Overpay
Resend Credit
RC Settings
VMC Reset TO VMC
Refill Control(Full Tube)
Low inventory report(real)
Secure mode for THB coin
Fuji dispensing coin mode
RFID deduction amount
RS232 mode
Set Overpay.
Setting Resend Credit Function.
Setting Recycle Function.
Setting VMC reset Function.
Setting Refill Control.
Setting Low inventory report.
Setting Secure mode.
Setting Fuji dispensing coin mode.
RFID deduction amount setting mode.
RS232 mode setting.
-10-
CC6100
127 Residual Credit Credit should remain on VMC.
128
130
Token Learning Mode
Reject Lever Setting
For MDB & Executive
For MDB & Executive
Token learning mode.
Set no refund after inserting payment.

Only for TWD
Only for THB
156
157
158
Set give changes order
VMC support value
Set up and write each
tube stock of coins
TWD set give changes order.
Set up VMC support value.
THB set up and write each tube stock
of coins.
Function Description
Executive only
Executive only
Executive only
Executive only
Executive only
Executive only
Executive only
Executive only
Executive only
Executive only
Set Single Vend or Multi Vend.
Set Price Display on VMC.
Set Product Price Holding by Changer.
Set Price Holding by Changer or VMC.
Set 2nd price for cashless function on or off.
Set BA enable with or without e-key.
Setup residual credit.
Set Credit Acceptance Limit.
Set Credit limit for cashless.
Set BA limitation per transactio.
Executive only
Executive only
Executive only
Set exact change notice on display.
Set Exchange Rate.
Set Overpay.
Code
200
201
202
203
204
205
207
LCM Display
Sell Mode
Price Display
Product Price
Price Holding
2nd Price for Cashless
Enable Bill Acceptance
Residual Credit
208 Acceptance limit For
Changer
209 Credit limit For Cashless
210 Bill(s) per Transaction
211
212
213
Exact Change Notice
Exact Rate
Overpay
Executive Setting Functions
Only for JPY
Only for TWD
160
161
JPY Amount display
NTD 50 special entry
condition
JPY Amount display options
NTD 50 special entry condition setting
Setting Functions
Code LCM Display Function Description
-11-
CC6100

5. DIP Switch Setting
FUNCTION SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
5-1. DIP Switch Setting for JPSTD, MDB
Note:
• SW3-ON, High anti-counterfeiting: CNY $1, RUB $5, TWD $50
• SW4-ON, High anti-counterfeiting: RUB $10
• Acceptance rate setting, SW1 to SW4, is limited to some regions or denominations.
Please contact your local dealer for further information.
High anti-counterfeiting (1st coin value)
High acceptance (1st coin value)
High anti-counterfeiting (2nd coin value)
High acceptance (2nd coin value)
High anti-counterfeiting (3rd coin value)
High acceptance (3rd coin value)
High anti-counterfeiting (4th coin value)
High acceptance (4th coin value)
Reserved
Reserved
Reserved
Reserved
Calibration Mode
Reserved
Reserved
Reserved
ON
ON
ON
ON
ON
ON
ON
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
DIP Switches
-12-
CC6100

FUNCTION SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
High anti-counterfeiting (1st coin value)
High acceptance (1st coin value)
High anti-counterfeiting (2nd coin value)
High acceptance (2nd coin value)
High anti-counterfeiting (3rd coin value)
High acceptance (3rd coin value)
High anti-counterfeiting (4th coin value)
High acceptance (4th coin value)
Reserved (MDB)
Reserved (Executive)
Reserved
Reserved
Calibration Mode
Reserved
Reserved
Reserved
ON
ON
ON
ON
ON
ON
ON
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
5-2. DIP Switch Setting for EXECUTIVE
Note:
• SW3-ON, High anti-counterfeiting: CNY $1, RUB $5, TWD $50
• SW4-ON, High anti-counterfeiting: RUB $10
• Acceptance rate setting, SW1 to SW4, is limited to some regions or denominations.
Please contact your local dealer for further information.
-13-
CC6100

FUNCTION SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
5-3. DIP Switch Setting for CC6100SA
High anti-counterfeiting (1st coin value)
High acceptance (1st coin value)
High anti-counterfeiting (2nd coin value)
High acceptance (2nd coin value)
High anti-counterfeiting (3rd coin value)
High acceptance (3rd coin value)
High anti-counterfeiting (4th coin value)
High acceptance (4th coin value)
Calibration Mode
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved (Turn off the sleep mode)
Reserved (Turn on the sleep mode)
ON
ON
ON
ON
ON
ON
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Note:
• SW3-ON, High anti-counterfeiting: CNY $1, RUB $5, TWD $50
• SW4-ON, High anti-counterfeiting: RUB $10
• Acceptance rate setting, SW1 to SW4, is limited to some regions or denominations.
Please contact your local dealer for further information.
ON
OFF
-14-
CC6100

6. Error Message
Code Cause LED
E10
E11
E12
E13
E14
E15
E16
E17
E18
E19
E20
E21
E22
E23
E24
E25
E26
E27
LCM Panel Open
Checksum Error
Signal from the coin base was not received when the power was turned on.
Two seconds after activation, the SYSTEM did not wait for the READY signal
from the DEVICE and jumped to the exception.
Two seconds after a transaction, the SYSTEM did not wait for the READY
signal triggered by the DEVICE.
Coil 1 is damaged.
Coil 2 is damaged.
Coil 3 is damaged.
Low level LED is damaged.
Coin separator sensor problem.
The deck is open for over 30 seconds.
Both the first and second group motors cannot be positioned.
The first motor group cannot be positioned. The first motor group might be
damaged, coin or foreign objects might have caused the motor to stuck,
coins are stuck in the coin tube, or the semicircle disk has derailed.
The second motor group cannot be positioned. The second motor group
might be damaged, coin or foreign objects might have caused the motor to
stuck, coins are stuck in the coin tube, or the semicircle disk has derailed.
Broke away or incorrectly positioned coin tubes.
Coins got stuck at the coin separation area or the coin tube opening twice in
a row, causing the HI Level Sensor to fail to detect the coin twice in a row.
“A” Tube Low Level = empty, HI Level = full at setup.
“B” Tube Low Level = empty, HI Level = full at setup.
“C” Tube Low Level = empty, HI Level = full at setup.
5 Red + 2 Red
Red Light
Red Light
1 Red
3 Red + 1 Red
3 Red + 2 Red
3 Red + 3 Red
3 Red + 5 Red
3 Red + 4 Red
5 Red + 1 Red
7 Red
None
None
5 Red
6 Red + 4 Red
None
None
None
E28
E29
“D” Tube Low Level = empty, HI Level = full at setup.
“E” Tube Low Level = empty, HI Level = full at setup.
None
None
E30
E31
“F” Tube Low Level = empty, HI Level = full at setup.
Barcode Reader error.
None
None
Recognition Ver Error
The three sets of LEDs used to distinguish Coin size have been damaged.
E33
E32
None
None
-15-
CC6100

Code Cause LED
Security Mode Locked. Only for THB
Security Mode Losted. Only for THB
Coin Calibration fail. Only for THB
E36
E37
E38
None
None
None
None The “Inhibit” signal transmitted by the interface. 2 Red
Normal Mode Fished. Only for THB
E35 None
-16-
CC6100

No.28, Ln. 15, Sec. 6, Minquan E. Rd., Neihu Dist., Taipei City 114, Taiwan
[e-mail] (For Sales)
[e-mail] (For Customer Service)
Website: www.ictgroup.com.tw
Taiwan
International Currency Technologies Corporation
CC6100

© 2013 International Currency Technologies Corporation
V. 5.0 Part Number: H6491D-R