ifi AC iPurifier User manual

•
I
Ar
--
.... .,.
...... ,,,, ......... ,,,,
•• ... ·••Cr• u;
1 2 3
1. Operation
Insert into the wall outlet that supplies the audio system with
mains electricity OR insert into the mains extension block
powering the audio system.
Try both locations to determine which has the greatest sonic
impact.
Tips:
• Multiple AC iPurifierscan be used simultaneously in asystem.
• The more ACiPurifiers used, the cleaner the overallpower.
• On a power strip, if the AC iPurifier is placed in themiddle, the
AC iPurifier will also act as a noiseshield, noise is reduced,
isolated and confined to therespective left/right sections to
the AC iPurifier.
2. 'Smart Diagnostics' Polarity and Earth
The next table depicts the different readings and the respective
LED colour combinations. Where needed,make the necessary
system adjustments.

Polari ty Earth Status
( LED) (LED)
1 Green Green Normal
2
Red Green PolarityError. Live and Neutral
connections are reversed.
3
Red Red
Ground Error. Earth is missing
or faulty (e.g. resistance too high).
In rare cases, AC iPurifierin auto
4
Off Off cut-out mode from over-voltage
or an electrical short.
3. ' Intelligent Earth' connection
The 4mm socket fitted to the AC iPurifier can be used to create a
supplementary Ground/Earth connection for audio systems
where there is no Ground/Earth present.
The supplementary Ground/Earth connection is 'smart' as it will
NOT introduce a ground loop EVEN if the system is already
Earthed (as more than one Earth also creates a ground loop).
4. Over-voltage Surge Protection
In the rare instance of excessive over-voltage OR a short in the
mains electricity, the over-voltage Surge Protection (OSP) is an
auto detection and cut-off circuit.
It will takeseveral minutes for the AC iPurifier to reboot BUT if
the over-voltage or short persists, then the AC iPurifier will NOT
power on, thereby protecting the downstream audio system
from harm.
Disclaimer: Although theACiPurifierdoes its utmost to protect the
audio system from electricharm,AMR/iFidoes not guaranteethis
as unpredictablecircumstances can occur.
Specifications
Noise reduction:
Surge Protection:
Operating Voltage:
Size/Weig ht: (USA):
( EUR ):
(AUS):
Warranty period:
> 40dB (> 100x)
max. 30,000A@ 1,000V/1 0uS
90V-26SV
0 40mm x 105mm (L)/108 (g) -0.24 (l bs)
0 40mm x 115mm (L)/126 (g) -0.28 (lbs)
0 40mm x 104mm (L)/103 (g) -0.23 (lbs)
12 months
ifi-audio.com Ver1 .4

•
I
3 Easy Steps...
Step 1
Access the
web site I
I
I
support ifi-audio.com
-.l
Step 2
Complete
name/system
details
DeariFi customer:
Step 3
Provide as much
system information
as possible
Thank you for purchasing this iFi product.
Please do not hesitate to contact us if you
have any questions surrounding our
products/support.
http://support.ifi-audio.com/

-
warranty
In order to activate the warranty for this iFi
product , you must register with the iFi
website.
Component:
Serial no:

Terms and Conditions
iFi guarantees that this iFi product shall be free from defects in materialsand
workmanship for a period of 1year for partsand labour.
The warranty period begins at the date of retail sale by an authorized iFi
distributor /dealer and is subject to the following requirements and
understandings:
• It is the responsibility of the buyer within 30 days from the original sale, to
registerand activate the product warranty with the iFi website.
• The original invoice must be produced for authentication prior to any
warrantyclaim.
• The iFi product must not have been modified in any manner whatsoever,
or the warranty will immediately becomevoid.
• The iFi warranty is only valid in the country of original sale and is not
transferable.
• The product must not have been stored in a humid environment; nor
subjected to weather, wate r, or saltwaterspray.
• iFi shall not, under any circumstances, be liable for any incidental or
consequential damagesarising from the loss of prope r ty or other damage
or losses due to the failure of an iFi product .iFi is not liable for loss of use or
inconvenience caused by the failure of an iFi product. iFi is not liable for
damagecaused to other audio components because of the failure of an iFi
product.
• During the warranty period, iFi will repair the product to working order, or ,
at iFi's discretion, replace the defective module with a similar available
product.
• All repairs performed after expiry of the warranty period will be charged to
the owner and will ca rry a 180- day warranty on parts and labour. The
customer is responsible for shipping the unit to the iFi distributor in the
original packaging.This includes the payment of any shipping charges and
related taxes.
• Should any warranty issues arise, iFi's decision is full and final.
ifi-audio.com