iGenix IG255W User manual

USER MANUAL
55cm Under Counter Larder Fridge
Please read these instructions carefully before use and retain for future reference
Before switching on your appliance,
always check for any damage which may have been caused in transit
IG255W / IG255B
Batch code:

2
SAFETY INSTRUCTIONS
Important: This appliance is not intended for use by persons
including children with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the
appliances by a person responsible for their safety.
• This product is intended to be used in a household and similar
applications such as: staff kitchen areas in shops, ofces and other
working environments;
- farm houses and by clients in hotels, motels and other
residential type environments;
- bed and breakfast type environments;
- catering and similar non retail applications.
• Do not use mechanical devices or other means to accelerate
the defrosting process, other than those recommended by the
manufacturer.
• Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are recommended
by the manufacturer.
• Do not store explosive substances such as aerosol cans with
a ammable propellant in this appliance.
CONTENTS
Important Safety Instructions...............................................2-3
Specication .................................................................................4
Appliance Overview...................................................................5
Installation.................................................................................5-7
Operating Instructions...........................................................7-8
Cleaning and Maintenance ....................................................8-9
Trouble Shooting Guide.......................................................... 10
Fuse Replacement.................................................................... 11
Disposal Information............................................................... 11
Igenix Warranty Terms & Conditions ............................ 12-13

3
• Ensure that the electricity supply in your home is rated at 220 -
240 volts before operating the appliance.
• Do not use the appliance if there is any damage to the power
cord.
• Use of an extension cord is not recommended with this product.
• This product is for indoor use only.
• Keep packaging material out of the reach of children! It can
become a choking or suffocation hazard.
• Always unplug the appliance before attempting to move it.
• Children should be supervised to ensure that they do not play
with the appliance.
• Ensure that the refrigerant circuit is not damaged.
• The refrigerant of this product is R600a which is ammable.
• Ensure when moving the appliance or during installation that the
cooling system does not get damaged.
• DANGER: Risk of child entrapment
- Before you dispose of your old refrigerator or freezer, remove
the doors and leave the shelves in place so that children cannot
easily climb inside.
• When disposing of the appliance, remove the plug so the
appliance is unusable.
IMPORTANT: Always allow 12 hours before turning on the
refrigerator to allow the coolant gases time to settle after the
refrigerator is in place.
Packaging: The cardboard packaging is recyclable and
should be disposed of according to local
regulations. Keep the packaging materials out of the reach of
children.
Before installation take care to remove all cardboard or other
packaging, including material from the condenser tubes and any
material surrounding the motor / compressor unit.

4
SPECIFICATION
Supplier Name / Trade Mark Igenix
Model Number IG255B / IG255W
Category Type Upright fridge
Energy Eciency Class A+
EU Eco-Label Award N/A
Annual Energy Consumption 117kWh/annum
Freezing Capacity N/A
Fridge Storage Volume (Litre) and Applicable
Star Rating Compartment 130
Freezer Storage Volume (Litre) N/A
Applicable Star Rating Compartment N/A
Refrigeration System (Frost Free, Static, Totally No Frost) Static
Temperature Rise Time N/A
Climate Class ST/N
This appliance is intended to be used at an ambient temperature
between “16” (lowest temperature) °C and “38”(highest temperature) °C
Noise Emission (dB) 39(db)
Built-in Appliance N/A
Wine Storage Appliance N/A
Voltage (V) 220-240V~
Wattage Power (W) 70W
Frequency (Hz) 50Hz
Power Source AC
Ambient Room Temperature Limits
Class Symbol Ambient average temperature °C
Extended temperature SN +10 to +32
Temperature N +16 to +32
Subtropical ST +16 to +38
Tropical T +16 to +43

5
APPLIANCE OVERVIEW
Internal Light and
Thermostat Control
Door Shelves
Bottle Shelf
Salad Drawer Cover
Adjustable Glass Shelves
Levelling feet
Salad Drawer
INSTALLATION
Location and air circulation
• The appliance must stand vertically on a at, even surface, to level the appliance use the levelling
feet by turning them until the appliance is as level as possible.
• This appliance has been designed to operate in ambient temperatures between 16°C and 38°C.
• It is not recommended to place this appliance in a room where the temperature is likely to drop
below 5°C for prolonged periods, as the internal appliance temperature will not be maintained.
• The appliance should not be placed near sources of heat e.g. cookers, radiators, direct sunlight
or in any unheated rooms e.g. garages, or outhouses, as extreme temperatures will affect the
performance of your appliance.
• Do not expose the appliance to damp conditions, open air or rain.
• Do not lift the appliance by the pipes or the door when moving.
• It is not recommended to place the appliance in a wall recess, tted cabinet or furniture as this
will not allow adequate ventilation and cause a potential re hazard.
• Allow 25mm of clearance space at the sides of the appliance and 20mm above the appliance.
• It is not recommended to place the appliance directly against the wall, allow at least a 15mm
clearance space at the rear.
• Do not place the appliance in a wall recess, tted cabinet or furniture as this will not allow
adequate ventilation and cause a potential re hazard.
Providing you follow the recommended ventilation requirements you will:
• Increase the life of the appliance.
• Minimise the risk of condensation on the outside of the appliance.
• Minimise operating noises caused by vibration.

6
1.
Reverse the door
The appliance door can be tted to open to either the left or the right depending on its location.
The appliance will have to be tilted and supported in order to carry this out. It is advisable to get some
help during this procedure.
Important: Do not lay the appliance at as this may damage the coolant system. Take care when
tting and tightening screws.
To change the direction of the door, please follow these instructions:
1. Ensure the appliance is unplugged and empty.
2. Remove the 2 Screws on the back of the top cover (Fig 1).
3. Lift the rear of the lid and push forward to remove from the front
locators.The top hinge now is accessible (Fig 2).
4. Unscrew the top door hinge located on the top of the door and then
remove the top hinge that is holding the door in place. (Fig 3)
5. With help, carefully tilt the unit backwards
and rest the unit on something solid
to stop slipping.
6. Lift the door off the hinge pin and place in
a safe place where it will not get damaged
7. Remove the bottom bushing and bottom
bushing cap and t them on the opposite
side (Fig 4).
8. Unscrew the bottom hinge (Fig 5).
9. Remove the levelling foot and t on the
opposite side (Fig 6).
10. Screw the bottom hinge on the opposite side
loosely (Fig 7).
2.
4.3.
5.
6. 7.

7
11. Carefully slide the door on to the bottom hinge pin.
12. Screw the top hinge loosely (Fig 8).
13. Check the fridge door is aligned horizontally and
vertically so that the seals are closed on all sides.
14. Tighten the top hinge. Use a spanner to tighten it if necessary (Fig 9).
15. Put the top cover back and screw it into place
securely (Fig 10).
16. With the door closed, check that the door is aligned
horizontally and vertically and that the seals are
closed on all sides before nally
tightening the bottom hinge.
17. Re-adjust the levelling feet as needed.
18. Allow 5 hours for the appliance to stand upright
before turning on the appliance to allow coolant gases
time to settle after the appliance is in place.
8.
9.
10.
OPERATING INSTRUCTIONS
• Allow 5 hours for the appliance to stand upright before turning on the appliance to allow
coolant gases time to settle after the appliance is in place.
• Before placing food in the appliance turn on and wait 24 hours, this is to make sure it is working
correctly and also to allow for the optimal internal temperature to be reached.
• The interior of the appliance needs to be cleaned prior to use by wiping with a soft cloth and
using warm water.Wipe appliance completely dry before replacing any shelves or salad drawers.
Using your Appliance
• Once dry, plug the appliance into the electricity supply.
• Adjust the temperature control which is located inside the appliance to Setting 4, this is the
recommended setting to use in a room with an average ambient temperature of 20°C.
• Keep the food packed, wrapped or covered.
• For hygiene reasons, always wrap food using a suitable packaging material, before storing in
your appliance to avoid contact with the surface of the appliance.
• Do not place food directly against the rear wall.
Adjusting the Temperature
• The internal temperature of the unit is controlled by a thermostat.The recommended position is
between 1 to 4 for colder working environments (i.e. during winter) and between 5 to 6 for hotter
environments. Please adjust according to the environment.
• Avoid setting the thermostat too high, as this may reduce the temperature to a point where some
food begins to freeze. If this happens turn down the thermostat slightly.
• The temperature in the appliances compartment can be monitored by using a fridge thermometer.
DO NOT USE a Mercury lled thermometer, as a breakage would cause a health hazard.

8
CLEANING AND MAINTENANCE
Disconnect from the electricity supply before cleaning.
Interior
• Remove all food from the appliance and cover to help keep cool.
• Remove all the shelves and salad crisper carefully from the appliance and wash in lukewarm water
with a soft cloth and dry thoroughly. Never replace the shelves or salad crisper into the appliance
if wet.
• Wipe the interior of the appliance with a damp clean cloth.
• Dry the interior thoroughly with a clean cloth and replace shelves and salad crisper.
• Plug in and switch on and allow the temperature in the appliance to drop back to an adequate
temperature.
• Replace the food in the appliance.
Important: Avoid getting water into the electric components of the appliance i.e. the thermostat, as
this may damage your appliance.
Exterior
• Use a clean, damp soft cloth to wipe the exterior surface of the appliance and dry thoroughly.
• Use a vacuum cleaner to remove dust from underneath the appliance and from around the
compressor which is situated at the back of the appliance, regularly to maintain adequate
ventilation. Use caution not to damage the coolant system.
Important: Do not use abrasive cloths, powders, household cleaners, bleach or wax polish to clean the
appliance as these can leave a smell in the appliance and can damage the exterior.
Door Seal
Use a clean, damp soft cloth to wipe the door seal and in between the creases, avoid damaging the door
seal as this will affect the performance of your appliance.
Drainage Channel
• The drainage channel must be cleaned regularly to prevent a build-up of impurities; this can
be found on the interior back wall of your appliance.
• Use a damp clean cloth and wipe the channel clean, then use a pipe cleaner or similar exible
object to clean the drainage hole to prevent blockages.
Going away
If you are going away and do not want to leave the appliance left on, switch off at the mains socket and
remove the plug ensuring not to pull the cord. Remove any food and follow the cleaning instructions in
the “Cleaning and Maintenance” section.
Important: Leave the door ajar as this will prevent odours and mould accumulating in the appliance
and will allow the appliance to dry completely.
Power Cut
In the event of a power cut keep the appliance door closed to maintain the temperature inside.

9
Operating Sounds
The cooling gas which circulates in the cooling circuit may make a slight noise (bubbling sound) even
when the compressor is not running. Do not worry this is quite normal.
If these sounds are different check that:
• The appliance is well levelled
• Nothing is touching the rear.
• The stuffs on the appliance are vibrating.
Bulb Replacement
If the internal Light is LED it is advised to contact a qualied technician to replace the bulb.
1. Turn the thermostat control to Setting 0.
2. Disconnect the appliance from the mains supply.
3. Hold and twist the lamp cover to remove
4. Unscrew the bulb, in an anti-clockwise direction and remove bulb. (insert the image)
5. Replace the bulb with a new bulb of the correct size and type (220~240V, max. 15W).
6. Ret the lamp cover and then plug back into the mains supply and switch on.

10
TROUBLESHOOTING
If you are having problems with your appliance, please use our troubleshooting guide below. If you are
unable to resolve the issue using this guide please ring our Customer Service Department on 0844 848
5861. Please have the model code and purchase information available.
The fridge does
not work.
1. Not properly plugged into the
mains wall socket.
2. No electricity in the mains wall
socket.
3. The door is not closed properly.
1. The pipe work is touching the
wall or skirting board.
2. The fridge has not been levelled
properly.
1. Plug in rmly.
2. Check fuse or breaker.
3. Make sure the door is properly
aligned and creates a seal
around the door.
Fault Possible cause Solution
The fridge is
making a lot of
noise.
1. Pull the fridge forward so it does
not touch the wall or skirting
board.
2. Adjust the feet at the front of
the fridge, ensuring they are in
rm contact with the oor.
1. The thermostat is set too high
for your environment.
2. The fridge is too close to a
heat source.
3. There is not enough ventilation
around the fridge..
4. The door is not closed properly.
1. Turn the thermostat to a higher
setting.
2. Move the fridge away from
the heat source and out of direct
sunlight.
3. Ensure there is a minimum gap
of 10mm at each side and 30mm
above the fridge.
4. Ensure that the door is properly
closed and the seal is not
damaged.
The temperature in
the fridge is too warm.

11
Fuse Cover
Fuse Replacement (Class I)
This appliance must be eathed. Remove the fuse cover with a small
 at head screw driver. Take out the fuse and replace with a new fuse
of the same Amp. Replace the fuse cover and push back into place.
MAINS PLUG FUSE REPLACEMENT
DISPOSAL INFORMATION
The European Directive 2012/19/EU on Waste Electrical and
Electronic Equipment (WEEE), requires that old household
electrical appliances must not be disposed of in normal unsorted
municipal waste.
Old appliances must be collected separately in order to optimise
the recovery and recycling of the materials they contain and reduce the impact
on human health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your
obligation, that when you dispose of the appliance it must be separately collected.
Consumers should contact their local authority or retailer for information
concerning the correct disposal of their old appliance.

12
lgenix Warranty Terms & Conditions
This product is guaranteed for a period of 12 months as standard from the date of purchase
against mechanical and electrical defects.You can extend your warranty for a further 12 months by
registering your product.
Upon registration we will cover your product for a period of 24 months from the original purchase
date against any mechanical or electrical defects.
To qualify for the warranty, the product must be used for domestic household use only and in
accordance with the instructions in the user manual.Any misuse of the product will result in the
warranty being void.
The warranty, does not cover accidental damage, misuse, neglect, tampering or incorrect
adjustment or installation.
The warranty, will be rendered invalid if the product is resold, has had its serial number removed
(or has an invalid serial number), or if an unauthorised person has carried out any repairs or
alterations.
The warranty does not cover accessories or consumable parts that require replacement under
normal use. This includes shelving, dials, lters, belts and trays etc.
In the unlikely event of a breakdown please refer to the Troubleshooting guide in your user manual
and check all plugs, fuses and the electricity supply.
If you still require assistance please contact our Customer Service department on
01473 271 272 or write to us at the following address:
Customer Service Department
38 Bluestem Road, Ransomes Europark
Ipswich, IP3 9RR
Please quote the Product Code which begins ‘IG’ or ‘DF’ and the Batch Coder beginning ‘5’ and give
details of the exact fault.We will then decide whether to repair or replace the item.
Before we arrange the repair or replacement you will be required to return a copy of your proof
of purchase. Please retain your original.
If an item is replaced within the agreed warranty period, the warranty for the replacement item will
be calculated from the purchase date of the original.
In the event that the product is inspected and no fault is found or the product is not within the
guarantee period you will be charged for the repair and any carriage costs.

13
Thank you for choosing lgenix
As a valued customer we would like to offer you a FREE 2 year warranty to cover your product
against any electrical or mechanical defects.
This means that in the unlikely event you develop a fault or problem with your product we will
happily repair or replace the item free of charge.
To qualify for the 2 year warranty you must register your product within 30 days of purchase.The
full Terms & Conditions of our warranty policy are shown on the opposite page.They are also
available on our website. www.igenix.co.uk
To register your product, please complete all sections of the form below and return to us at the
following address: lgenix, 38 Bluestem Road, Ransomes Europark, Ipswich, IP3 9RR.
Alternatively you can visit the lgenix website and complete the form online.
Customer Details:
Title: First Name Surname:
Address:
Post Code:
Email:
Telephone:
Product Information:
Product Code (Beginning IG or DF): Product Description:
Batch Number (Beginning 5): Serial Number (If applicable):
Date of Purchase:
Retailer Name:
Retailer Location:
Please tick here to conrm you have read and accept our Terms & Conditions
Please tick here if you DO NOT wish to receive marketing information from us
Customer Signature: Date: