Iget HOME GUARD BabyCare HGWIP-819 User manual

Model: HGWIP-819
Quick Start Guide - EN
BabyCare
HGWIP-819
5 060442 17819 9
iGET HOMEGUARD 2020

WHEREVER YOU ARE
GIVES YOU
PEACE OF MIND
32
Welcome
BABY FAMILY

What’s included
4 5
Parts & Description
Speaker
Pan / Tilt
Power Port
Reset Button
Indicator Lights
Microphone
Photosensor
Lens
Infrared LED
MicroSD Card Slot
Camera Power Adapter
Warning StickerBracket
Quick Start Guide User Manual
Fixings Wall Plug
SECURITY
PROTECTED BY
24 Hours Video
Monitoring
Front Rear

Power on Camera
Step 1 Get the App Step 2
For the best experience, download the Homeguardone app for your smartphone by scanning the QR code below or searching for
“Homeguardone” in the app store.
Connect the AC adapter to
your camera and plug it in.
If you see the blue and red lights
flashing, camera waiting to connect.
6 7
Make sure you are within range of
the same Wi-Fi network you'll use
for your camera.
Indicator Lights Status
Indicator Light Status
Camera is powered on
Waiting to connect now
Camera is connecting Wi-Fi
Succeeded to connect Wi-Fi
1. Reset camera to factory setting
2. Camera is upgrading firmware
Red light on
Red and blue light alternately flashing
Blue light flashing
Blue light solid
Red light quickly flashing
Camera Status
Red and blue
light flashing
3

Account Register
Step 3 Add device Step 4
8 9
Open Homeguardone App, then select
Sign up.
Enter your email. Create a password at
least 8 characters long. Your password
must include three of the following:
•At least one uppercase letter
•At least one lowercase letter
•At least one number
You will receive an email with your
Activation Link. Open the link to activate
your account. Go back to login your
account after activation successful.
Login your account and tap “Add device”.
Choose the “Baby Care” to connect.
Check if the camera’s indicator is
flashing Blue and Red. If not, Please try
to reset the camera.
Reset Method: Keep the camera powered
on for more than 1 minute, then press and
hold “Reset” button until the LED turns red.
1
2
3
1
2
3
Hold 3~5
Seconds

10 11
You’re Done!
Congratulations! Your HGWIP819 BabyCare is set up and ready to go.
You are now free to position your camera anywhere in your home where you get a WiFi
signal and view it remotely from anywhere in the world on your Smartphone or Tablet!
Connect to Network
Step 5
Enter the correct Wi-Fi password.
Note: The camera is not support 5GHz
Wi-Fi.
This App will generate a QR code, place
the QR code 3~8 inches in front of the
camera lens. when the camera prompt
“QR code scanning is successful”, press
“Next” and wait a moment.
Name the camera after the Pairing is
successful. Press “OK” to complete the
add operation.
1
2
3

Home Page Live View
12 13
1 5
6
7
8
91110
2
3
4
1
5
6
7
8
9
11
10
2
3
4
Tap to access Split-screen view
Tap to start live view
Displays the camera name
Displays the device cloud ID
Tap to add a new camera
Displays the camera network status
Tap to access camera setting
Tap to play the recorded video in the memory card
Tap to access device list page
Tap to access alert information page
Tap to access account information page
Split-screen
Live Video
Device name
Device ID
Add Device
Device Status
Setting
Replay
Devices
Alerts
Me
1
2
3
4
5
6 7 8 9
1
2
3
4
5
6
7
8
9
Resolution
Mute / Unmute
2-way talk
Record
Capture
Setting
Share
Full screen
Console
Position
Alert
Replay
Tap to change between video quality levels: SD, FHD
Tap to hear the camera or unmute
Activate the microphone to enable 2-way talk
Saves video clip from a live video
Saves images captured from a live video
Tap to access camera setting
Tap to share the camera to others
Click to view in full screen
Tap to enable pan & tilt controls
Adds/Adjusts the preset and sets the home position
Tap to access alert list
Tap to play the recorded video in the memory card

View from Mac or Windows PC Specifications
Camera
Resolution
Video
Audio
Image Sensor
Night Vision
Motion Detection
Storage
Pan / Tilt Range
Power Input
Wireless Speed
Security Protocols
Dimensions / Weight
1080p Full HD Video Recording, 110° Wide Angle Lens
1920 × 1080, 640 × 360
H.264, 1920 × 1080@15fps
Built-in Microphone & Speaker
1/2.7” CMOS Sensor, f=3.6mm, F=2.2
4pcs SMT 940nm Lights, Up to 26ft/8m
Supported, Will Activate Camera
Built-in 8GB Storage, Support up to 128GB
Horizontal 350°, Vertical 90°
DC 5V/1A, <5W
IEEE802.11b/g/n 150Mbps
64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK
81mm × 81mm × 110mm, 199g
Item Description
Install Homeguardone software for your Mac or Windows PC from the included CD.
14 15