Iiglo IIERGOARMSUPP User manual

Ergo PC Desk
With Bag
Instruction
Manual

PRE-ASSEMBLY INTRODUCTION
Unless you are particularly adept at assembling at-pack/knock-down furni-
ture, we underst and building ready-to-assemble furniture can be a frustrating
experience for some. To help avoid confusion and to make the assembly process
quicker and smoother, we have provide d some helpful tips. Before you begin the
assembly, please read the following:
1. Due to the size and/or weight on most of the ready-to-assemble furniture, it
is highly recommend ed that the assembly should be done near the area of its
intended location. Make sure you have enough space to move around during
the assembly. ALWAYS have at least two people to help with transporting and
assembling of the product to avoid any potential injury and/or damage.
2. To protect from damage, assemble the item on a clean, protective surface,
such as on a carpet or cardboard.
3. Make sure you have taken all the parts and hardware out of their packaging.
Do not throw away packaging material until assembly is completed.
4. Make sure all parts and hardware are accounted for by comparing the actual
parts and hardware to the list provided in the assembly instructions. Also check
for any irregularity such as crack, aw or improperly drilled hole. If there is any
problem or missing piece, please contact the manufacturer or the supplier.
Please have the model number, part number and a brief description of the prob-
lem ready will help expedite the replacement process.
5. Read the entire instruction manual and view the diagrams rst before as-
sembling. Arrange your parts in order of use and group the identical hardware
together to make it easier to grab each piec e as you begin to assemble.
6. During the assembly process, make sure all parts are properly aligned before
tightening with the tool provided or required for the assembly. Do not use power
tools and do not over tighten.
7. When applying glue to the wood dowels to bond the parts together, please be
ABSOLUTELY certain that the parts are correct and lined up with each other (re-
fer to diagrams and take notice of the various pre-drilled hole locations). When in
doubt, assemble the parts together rst and if the parts t right, then apply glue
to the wood dowels.
Intended use
The Desk is exclusively designed to be used as ofce furniture. A different use,
or use extending beyond the specied intended use is considered non-intended
use. Improper use can cause damage on user as well as material damage.
Non-intended use
non-intended use is prohibited. iiglo shall assume no liability for any damage
caused and the guarantee for correct functional operation of the components
shall no longer apply.
Non-intended use includes:
•Use as a climbing aid
• Permanent storage of objects with a total weight of more than approx 100 kg
•Outdoor use
•Use in the damp room
Instruction for use
Thank tou for purchasing a product from iiglo. Please read the manual before
installing the product.

Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary. Should you choose to use polish,
test rst in an inconspicuous area.
Using solvents of any kind on your furniture may damage the nish.
Never use water to clean your furniture as it may cause damage to the
nish.
Always use coasters under beverage glasses and owerpots.
Liquid spills should be removed immediately. Using a soft, clean cloth,
blot the spill gently. Avoid rubbing.
Always use protective pads under hot dishes and plates. Heat can cause
chemical changes that may create spotting within the furniture nish.
In the event that your furniture is stained or otherwise damaged during
use, we recommend that you call a professional to repair your furniture.
Check bolts/screws periodically and tighten them if necessary.
It is best to keep your furniture in a climate-controlled environment.
Extreme temperature and humidity changes can cause fading, warping,
shrinking and splitting of wood. It is advised to keep furniture away from
direct sunlight as sun may damage the nish.
Proper care and cleaning at home will extend the life of your purchase.
Follow these important and helpful tips that will enhance your furniture as
it ages.
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary. Should you choose to use polish,
test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage the finish.
Never use water to clean your furniture as it may cause damage to the finish.
Always use coasters under beverage glasses and flowerpots.
Liquid spills should be removed immediately. Using a soft, clean cloth,
blot the spill gently. Avoid rubbing.
Always use protective pads under hot dishes and plates. Heat can cause
chemical changes that may create spotting within the furniture finish.
In the event that your furniture is stained or otherwise damaged during
use, we recommend that you call a professional to repair your furniture.
Check bolts/screws periodically and tighten them if necessary.





It is best to keep your furniture in a climate-controlled environment.
Extreme temperature and humidity changes can cause fading, warping,
shrinking and splitting of wood. It is advised to keep furniture away from
direct sunlight as sun may damage the finish.

Proper care and cleaning at home will extend the life of your purchase.
Follow these important and helpful tips that will enhance your furniture as
it ages.

7RROV5HTXLUHGIRU$VVHPEO\
3KLOOLSV6FUHZGULYHU
,QFOXGHG
2 PERSON RECOMMENDED INQUIRY
BASIC ASSEMBLY TECHNIQUES
Tools Required for Assembly
Philips Screwdriver (included)
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary. Should you choose to use polish,
test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage the finish.
Never use water to clean your furniture as it may cause damage to the finish.
Always use coasters under beverage glasses and flowerpots.
Liquid spills should be removed immediately. Using a soft, clean cloth,
blot the spill gently. Avoid rubbing.
Always use protective pads under hot dishes and plates. Heat can cause
chemical changes that may create spotting within the furniture finish.
In the event that your furniture is stained or otherwise damaged during
use, we recommend that you call a professional to repair your furniture.
Check bolts/screws periodically and tighten them if necessary.





It is best to keep your furniture in a climate-controlled environment.
Extreme temperature and humidity changes can cause fading, warping,
shrinking and splitting of wood. It is advised to keep furniture away from
direct sunlight as sun may damage the finish.

Proper care and cleaning at home will extend the life of your purchase.
Follow these important and helpful tips that will enhance your furniture as
it ages.

7RROV5HTXLUHGIRU$VVHPEO\
3KLOOLSV6FUHZGULYHU
,QFOXGHG
2 PERSON RECOMMENDED INQUIRY
BASIC ASSEMBLY TECHNIQUES
2 person recommended Inquiry
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary. Should you choose to use polish,
test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage the finish.
Never use water to clean your furniture as it may cause damage to the finish.
Always use coasters under beverage glasses and flowerpots.
Liquid spills should be removed immediately. Using a soft, clean cloth,
blot the spill gently. Avoid rubbing.
Always use protective pads under hot dishes and plates. Heat can cause
chemical changes that may create spotting within the furniture finish.
In the event that your furniture is stained or otherwise damaged during
use, we recommend that you call a professional to repair your furniture.
Check bolts/screws periodically and tighten them if necessary.





It is best to keep your furniture in a climate-controlled environment.
Extreme temperature and humidity changes can cause fading, warping,
shrinking and splitting of wood. It is advised to keep furniture away from
direct sunlight as sun may damage the finish.

Proper care and cleaning at home will extend the life of your purchase.
Follow these important and helpful tips that will enhance your furniture as
it ages.

7RROV5HTXLUHGIRU$VVHPEO\
3KLOOLSV6FUHZGULYHU
,QFOXGHG
2 PERSON RECOMMENDED INQUIRY
BASIC ASSEMBLY TECHNIQUES
It is highly recommended that
the assembly should be done
near the area if its intended
location. Make sure you have
enough space to move around
during assembly.
Position each part correctly
and insert screws or bolts
into their respective holes
by hand tighten or using the
proper hand tool. Only tight-
en when step is completed
or when instruction to do so.
Use cardboard or carpet
area when assembling fur-
niture to prevent scratches.
Make sure the furniture
rests on a at and level
surface with each leg evenly
touching the oor.
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary. Should you choose to use polish,
test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage the finish.
Never use water to clean your furniture as it may cause damage to the finish.
Always use coasters under beverage glasses and flowerpots.
Liquid spills should be removed immediately. Using a soft, clean cloth,
blot the spill gently. Avoid rubbing.
Always use protective pads under hot dishes and plates. Heat can cause
chemical changes that may create spotting within the furniture finish.
In the event that your furniture is stained or otherwise damaged during
use, we recommend that you call a professional to repair your furniture.
Check bolts/screws periodically and tighten them if necessary.





It is best to keep your furniture in a climate-controlled environment.
Extreme temperature and humidity changes can cause fading, warping,
shrinking and splitting of wood. It is advised to keep furniture away from
direct sunlight as sun may damage the finish.

Proper care and cleaning at home will extend the life of your purchase.
Follow these important and helpful tips that will enhance your furniture as
it ages.

7RROV5HTXLUHGIRU$VVHPEO\
3KLOOLSV6FUHZGULYHU
,QFOXGHG
2 PERSON RECOMMENDED INQUIRY
BASIC ASSEMBLY TECHNIQUES
Always have at least two peo-
ple to help with transporting
and assembling the product
to avoid any potential injury or
damage.
Make sure all parts are properly
aligned, then use the appro-
priate hand tool to completely
tighten the bolts or screws. Do
not use power tools to over-
thighten.
Save the instruction and store
any supplied tool for later
maintenance. After two weeks,
check and tighten any loose
hardware and repeat again
every six months thereafter.

surface during assembly.
①Arm holder ②Clips A.Big Flat Screw
1 PC 2 PCS 6 PCS
①
A
A
A
A
A
A
②
②
Model：IIERGOARMSUPP
Dimension：600W*280D*90H
Page：1--1
Attention：Always lay
components on A
clean,soft-cushioned

Imported by iiglo | Østre Kullerød 4,
N-3241 Sandefjord, Norway
www.iiglo.com | Made in China