iiNet MobiiHotspot 3G User manual

Quick Installation Guide

CONGRATULATIONS,
YOU’RE NOW THE PROUD OWNER
OF AN iiNet MOBIIHOTSPOT 3G.

This manual is designed to show
you all the ins and outs of your iiNet
MobiiHotspot 3G including how you
can become a hotspot for up to five
devices at home or when you’re out
and about.
All the images provided are a guide
only so the real thing may look a
little different.

GETTING TO KNOW YOUR iiNet MOBIIHOTSPOT 3G
Connection
Up to five Wi-Fi devices can be connected to the Internet
through your iiNet MobiiHotspot 3G. Connecting each
device will depend on its operating system. The following
images give you an idea of how it all comes together
when connection is complete.

Smart phone Game machine
Digital camera
Laptop
1. Multi-device access via Wi-Fi
4

2. One-device access via USB

3. Multi-device access via Wi-Fi and
USB at the same time
Smart phone Game machine
Digital camera
Laptop
6

Appearance
No. Item
1Screen
2• Reset button
• External antenna interface
3Power button
4WPS button (secure connection)
5USB port
6microSD card slot
7Strap hole

1
2
3
4
5
6
7
8

Screen
No. Item
1Signal strength
2 Network
3• Wi-Fi enabled
• Number of devices connected
4Internet connection status
5• New messages
• Number of new messages
6Battery level
7International roaming state
8• Traffic data
• Connection duration

Screen
No. Item
1Signal strength
2 Network
3• Wi-Fi enabled
• Number of devices connected
4Internet connection status
5• New messages
• Number of new messages
6Battery level
7International roaming state
8• Traffic data
• Connection duration
7
1
2
4
8
3
5
6
0B 00:00
Note:
• Wi-Fi: Wireless Fidelity
• WPS: Wi-Fi Protected Setup
• Traffic statistics are for your
reference only.
10

BEFORE GETTING STARTED
Installing the SIM Card
Note: It’s important to remember to
only use a SIM card that is compatible
with the iiNet MobiiHotspot 3G. DO
NOT attempt to use a Micro or Nano
SIM in this device.
Insert the SIM card in the card slot.
Ensure the SIM card is facing in the
right direction, as shown in the image
to the right, and then slide the SIM
card into the slot.

12
a
b
1
34
2

Insert the microSD card into your iiNet MobiiHotspot
3G, as shown in the image to the right.
1. Remove the rubber cap from the microSD card slot.
Then insert the microSD card into the slot.
2.After inserting the microSD card completely, attach
the rubber cap.

Note:
• The microSD card is an optional accessory.
• To remove the microSD card, press in the card gently. The
microSD card will pop out for removal.
• Do not remove the microSD or SIM card when the card is in use.
Otherwise, the card as well as your iiNet MobiiHotspot 3G may
get damaged and the data stored on the card may be corrupted.
14

Charging the Battery
If the battery hasn’t been used for a long time, it must
be charged first.
1. Using the charger
Only use chargers compatible with the iiNet
MobiiHotspot 3G. Use of an incompatible charger or one
from an unknown manufacturer may cause the device
to malfunction, fail, or could even cause a fire. It will also
void all warranties, whether expressed or implied, on the
product.

16

2. Connecting to a PC for charging
Connect the iiNet MobiiHotspot 3G to a PC using a
compatible data cable.

18

ACCESSING THE INTERNET VIA WI-FI CONNECTION
Follow the steps below to get online quickly and easily.
1. Power on the iiNet MobiiHotspot 3G
Press and hold until the screen lights up. The iiNet
MobiiHotspot 3G is powered on.