MOUNTING KITS
User manual
M099A08
CHECKING THE CONTENTS OF THE PACKAGE
The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or
damaged, please contact your local iiyama dealer or regional iiyama oce.
■Mount-Bracket (Bracket A) :
6pcs (7221772A101: 2pcs for ProLite TF1015MC, 4pcs for ProLite TF1515MC, 6pcs for ProLite TF2415MC)
■L-Bracket (Bracket B) :
8pcs (7221771A0101: 2pcs for ProLite TF1015MC, 7221771A0201: 6pcs for ProLite TF1515MC / ProLite TF2415MC)
■Bracket Screw M4×6 : 24pcs (8pcs for ProLite TF1015MC, 16pcs for ProLite TF1515MC, 24pcs for ProLite TF2415MC)
■User Manual (this document)
For ProLite TF1015MC, ProLite TF1515MC, ProLite TF2415MC
Attach the monitor from the front side of the recess and x with the screws.
(Screws: ProLite TF1015MC: 4 pcs, ProLite TF1515MC: 8 pcs, ProLite TF2415MC: 12 pcs)
Bracket A/B
Bracket A/B
Bracket A/B
Bracket A/B
ProLite TF1015MC
ProLite TF2415MC
Bracket A/B
Screw x 2 x 2
SPECIAL NOTES
Mount-Brackets, L-Brackets and screws are necessary to install an open frame monitor.
TheMount-BracketsandL-Bracketsaredesignedtobemountedtospecicwalltypesandhardware,inaccordance
with the installation instructions.
UsingMount-Brackets,L-Bracketsorscrewsotherthanthosespeciedintheinstallationinstructionsmaydamage
the monitor.
As shown in figure below, tighten Bracket A to B using the
screws supplied.
(Bracket A/B: ProLite TF1015MC: 2 pcs each, ProLite
TF1515MC: 4 pcs each, ProLite TF2415MC: 6 pcs each
Screws: ProLite TF1015MC: 4 pcs, ProLite TF1515MC: 8 pcs,
ProLite TF2415MC: 12 pcs)
Attach the Bracket A/B( ) to the back of the recess, where the
monitor is to be attached, and x it with screws.
(Customer’s screws: ProLite TF1015MC: 4 pcs, ProLite
TF1515MC: 8 pcs, ProLite TF2415MC: 12 pcs)
CAUTION
Bracket B
Bracket A
Bracket A
Screw x 2
Back of the recess
Bracket A/B
NOTE
20.0mm
Front of the Monitor
Screw holes for
mounting the chassis
You will need a screwdriver to mount the Bracket A/B.
Brackets A/B and screws are necessary to install an open frame monitor.
For details regarding the operating temperature and humidity conditions, see
specication of this User Manual.
The position of the bracket A/B can be either 0 mm or 20.0 mm from the front
of the monitor depending on which screw holes you choose for mounting it.
ProLite TF1515MC
