Ikan OTTICA User manual
TROUBLESHOOTING GUIDE
OTTICA
Make sure all of your devices that you’re trying to connect (camera, computer, and controller) are in
the same network range. The first 3 segments need to be the same. For example: “192.168.5._”
If you are having trouble finding the IP address of the camera, here are a few options:
1. Plug in the camera to a monitor via HDMI. The IP address will appear in the top left corner of
the screen when it boots up.
2. Download and run “NDI Analysis”
https://ndi.video/tools/ndi-analysis/
2A.
2D. After pasting the text, press enter. All of the NDI streams will appear with information
including their IP addresses.
3. Download and run “Advanced IP Scanner”
https://www.advanced-ip-scanner.com/
3A.
3B. Type in the IP range that you’d like to search within. Press the scan button. All the
devices on your network will appear with their IP addresses.
4. Use the included IR remote, point it at only one camera, press “ * ”, “ # ”, “Manual” in
that order. This will reset the camera’s IP address to the default of 192.168.5.163.
NOTE: Make sure you do not point the IR Remote at any
other cameras except for the one you are trying to
change. Doing so may cause an IP collision. Unplug
any other cameras if you need to. We recommend
unplugging any cameras you are not working with
during the installation process.
Once you’ve discovered the IP address, type it into the URL bar of your web
browser and press enter.
Before logging in, make sure the language is set to English. Then log in using
“admin” for both username and password.
After logging in, go to the configurations tab at the top right of the screen and go
to the “Ethernet settings.”
Uncheck the “DHCP” box, then set the IP address to your liking (make sure the IP
address is not identical to any other devices on your network.)
Press the save icon, then reboot the camera.
https://www.youtube.com/watch?v=zroTxsDC2V8
If the camera login screen still does not appear, you may have to temporarily change
the IP address of your computer.
If you need help changing the IP address of their computer, here is a tutorial.
This tutorial is for Windows 10. For Windows 11, getting to the adapter options is
slightly different.
Follow these instructions if you are using Windows 11:
Press the Windows Button > Control Panel > Network & Internet > Network &
Sharing > Ethernet > Change Adapter Options
To change the IP address of your controller, press the “SETUP” button. Toggle down
to menu “2/10” and select “IP: Static” then press the “ENTER” button.
After you’ve changed the IP address of your cameras, you can change the IP address
of your computer back to DHCP by clicking the following option:
Here, you can set the first three segments of your controller’s IP address to match your
camera.
You should be able to add your OTTICA cameras. To add your camera (Using IP VISCA):
1. Press the “IP” button, type in your camera’s IP address. Note: Use the joystick
to navigate through the different segments in the IP range when typing in the IP
address if needed. Press the “Enter” key.
2. The port number for VISCA is “1259”. Press the “Enter” key.
3. Designate the camera number. Press the “Enter” key.
If you are setting up multiple cameras, we recommend unplugging any cameras you are
not setting during the installation process. Even cameras you have just reset the IP
address on.
Repeat this entire process for each camera you are setting up.
Learn More
More dynamic information at official website: www.ikancorp.com
Support
©2023 Ikan International. All rights reserved.
Other manuals for OTTICA
1
This manual suits for next models
1
Table of contents
